defining the marketing research problem

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

10.2 Steps in the Marketing Research Process

Learning objective.

Describe the basic steps in the marketing research process and the purpose of each step.

The basic steps used to conduct marketing research are shown in Figure 10.6 “Steps in the Marketing Research Process” . Next, we discuss each step.

Figure 10.6 Steps in the Marketing Research Process

Step 1: Define the Problem (or Opportunity)

There’s a saying in marketing research that a problem half defined is a problem half solved. Defining the “problem” of the research sounds simple, doesn’t it? Suppose your product is tutoring other students in a subject you’re a whiz at. You have been tutoring for a while, and people have begun to realize you’re darned good at it. Then, suddenly, your business drops off. Or it explodes, and you can’t cope with the number of students you’re being asked help. If the business has exploded, should you try to expand your services? Perhaps you should subcontract with some other “whiz” students. You would send them students to be tutored, and they would give you a cut of their pay for each student you referred to them.

Both of these scenarios would be a problem for you, wouldn’t they? They are problems insofar as they cause you headaches. But are they really the problem? Or are they the symptoms of something bigger? For example, maybe your business has dropped off because your school is experiencing financial trouble and has lowered the number of scholarships given to incoming freshmen. Consequently, there are fewer total students on campus who need your services. Conversely, if you’re swamped with people who want you to tutor them, perhaps your school awarded more scholarships than usual, so there are a greater number of students who need your services. Alternately, perhaps you ran an ad in your school’s college newspaper, and that led to the influx of students wanting you to tutor them.

Businesses are in the same boat you are as a tutor. They take a look at symptoms and try to drill down to the potential causes. If you approach a marketing research company with either scenario—either too much or too little business—the firm will seek more information from you such as the following:

In what semester(s) did your tutoring revenues fall (or rise)?
In what subject areas did your tutoring revenues fall (or rise)?
In what sales channels did revenues fall (or rise): Were there fewer (or more) referrals from professors or other students? Did the ad you ran result in fewer (or more) referrals this month than in the past months?
Among what demographic groups did your revenues fall (or rise)—women or men, people with certain majors, or first-year, second-, third-, or fourth-year students?

The next task for the researcher is to put into writing the research objective. The research objective is the goal(s) the research is supposed to accomplish. The marketing research objective for your tutoring business might read as follows:

To survey college professors who teach 100- and 200-level math courses to determine why the number of students referred for tutoring dropped in the second semester.

This is admittedly a simple example designed to help you understand the basic concept. If you take a marketing research course, you will learn that research objectives get a lot more complicated than this. The following is an example:

“To gather information from a sample representative of the U.S. population among those who are ‘very likely’ to purchase an automobile within the next 6 months, which assesses preferences (measured on a 1–5 scale ranging from ‘very likely to buy’ to ‘not likely at all to buy’) for the model diesel at three different price levels. Such data would serve as input into a forecasting model that would forecast unit sales, by geographic regions of the country, for each combination of the model’s different prices and fuel configurations (Burns & Bush, 2010).”

Now do you understand why defining the problem is complicated and half the battle? Many a marketing research effort is doomed from the start because the problem was improperly defined. Coke’s ill-fated decision to change the formula of Coca-Cola in 1985 is a case in point: Pepsi had been creeping up on Coke in terms of market share over the years as well as running a successful promotional campaign called the “Pepsi Challenge,” in which consumers were encouraged to do a blind taste test to see if they agreed that Pepsi was better. Coke spent four years researching “the problem.” Indeed, people seemed to like the taste of Pepsi better in blind taste tests. Thus, the formula for Coke was changed. But the outcry among the public was so great that the new formula didn’t last long—a matter of months—before the old formula was reinstated. Some marketing experts believe Coke incorrectly defined the problem as “How can we beat Pepsi in taste tests?” instead of “How can we gain market share against Pepsi?” (Burns & Bush, 2010)

New Coke Is It! 1985

(click to see video)

This video documents the Coca-Cola Company’s ill-fated launch of New Coke in 1985.

1985 Pepsi Commercial—“They Changed My Coke”

This video shows how Pepsi tried to capitalize on the blunder.

Step 2: Design the Research

The next step in the marketing research process is to do a research design. The research design is your “plan of attack.” It outlines what data you are going to gather and from whom, how and when you will collect the data, and how you will analyze it once it’s been obtained. Let’s look at the data you’re going to gather first.

There are two basic types of data you can gather. The first is primary data. Primary data is information you collect yourself, using hands-on tools such as interviews or surveys, specifically for the research project you’re conducting. Secondary data is data that has already been collected by someone else, or data you have already collected for another purpose. Collecting primary data is more time consuming, work intensive, and expensive than collecting secondary data. Consequently, you should always try to collect secondary data first to solve your research problem, if you can. A great deal of research on a wide variety of topics already exists. If this research contains the answer to your question, there is no need for you to replicate it. Why reinvent the wheel?

Sources of Secondary Data

Your company’s internal records are a source of secondary data. So are any data you collect as part of your marketing intelligence gathering efforts. You can also purchase syndicated research. Syndicated research is primary data that marketing research firms collect on a regular basis and sell to other companies. J.D. Power & Associates is a provider of syndicated research. The company conducts independent, unbiased surveys of customer satisfaction, product quality, and buyer behavior for various industries. The company is best known for its research in the automobile sector. One of the best-known sellers of syndicated research is the Nielsen Company, which produces the Nielsen ratings. The Nielsen ratings measure the size of television, radio, and newspaper audiences in various markets. You have probably read or heard about TV shows that get the highest (Nielsen) ratings. (Arbitron does the same thing for radio ratings.) Nielsen, along with its main competitor, Information Resources, Inc. (IRI), also sells businesses scanner-based research . Scanner-based research is information collected by scanners at checkout stands in stores. Each week Nielsen and IRI collect information on the millions of purchases made at stores. The companies then compile the information and sell it to firms in various industries that subscribe to their services. The Nielsen Company has also recently teamed up with Facebook to collect marketing research information. Via Facebook, users will see surveys in some of the spaces in which they used to see online ads (Rappeport, Gelles, 2009).

By contrast, MarketResearch.com is an example of a marketing research aggregator. A marketing research aggregator is a marketing research company that doesn’t conduct its own research and sell it. Instead, it buys research reports from other marketing research companies and then sells the reports in their entirety or in pieces to other firms. Check out MarketResearch.com’s Web site. As you will see there are a huge number of studies in every category imaginable that you can buy for relatively small amounts of money.

Figure 10.7

A screen shot of Market Research's website

Market research aggregators buy research reports from other marketing research companies and then resell them in part or in whole to other companies so they don’t have to gather primary data.

Source: http://www.marketresearch.com .

Your local library is a good place to gather free secondary data. It has searchable databases as well as handbooks, dictionaries, and books, some of which you can access online. Government agencies also collect and report information on demographics, economic and employment data, health information, and balance-of-trade statistics, among a lot of other information. The U.S. Census Bureau collects census data every ten years to gather information about who lives where. Basic demographic information about sex, age, race, and types of housing in which people live in each U.S. state, metropolitan area, and rural area is gathered so that population shifts can be tracked for various purposes, including determining the number of legislators each state should have in the U.S. House of Representatives. For the U.S. government, this is primary data. For marketing managers it is an important source of secondary data.

The Survey Research Center at the University of Michigan also conducts periodic surveys and publishes information about trends in the United States. One research study the center continually conducts is called the “Changing Lives of American Families” ( http://www.isr.umich.edu/home/news/research-update/2007-01.pdf ). This is important research data for marketing managers monitoring consumer trends in the marketplace. The World Bank and the United Nations are two international organizations that collect a great deal of information. Their Web sites contain many free research studies and data related to global markets. Table 10.1 “Examples of Primary Data Sources versus Secondary Data Sources” shows some examples of primary versus secondary data sources.

Table 10.1 Examples of Primary Data Sources versus Secondary Data Sources

Gauging the Quality of Secondary Data

When you are gathering secondary information, it’s always good to be a little skeptical of it. Sometimes studies are commissioned to produce the result a client wants to hear—or wants the public to hear. For example, throughout the twentieth century, numerous studies found that smoking was good for people’s health. The problem was the studies were commissioned by the tobacco industry. Web research can also pose certain hazards. There are many biased sites that try to fool people that they are providing good data. Often the data is favorable to the products they are trying to sell. Beware of product reviews as well. Unscrupulous sellers sometimes get online and create bogus ratings for products. See below for questions you can ask to help gauge the credibility of secondary information.

Gauging the Credibility of Secondary Data: Questions to Ask

Who gathered this information?
For what purpose?
What does the person or organization that gathered the information have to gain by doing so?
Was the information gathered and reported in a systematic manner?
Is the source of the information accepted as an authority by other experts in the field?
Does the article provide objective evidence to support the position presented?

Types of Research Design

Now let’s look specifically at the types of research designs that are utilized. By understanding different types of research designs, a researcher can solve a client’s problems more quickly and efficiently without jumping through more hoops than necessary. Research designs fall into one of the following three categories:

Exploratory research design
Descriptive research design
Causal research design (experiments)

An exploratory research design is useful when you are initially investigating a problem but you haven’t defined it well enough to do an in-depth study of it. Perhaps via your regular market intelligence, you have spotted what appears to be a new opportunity in the marketplace. You would then do exploratory research to investigate it further and “get your feet wet,” as the saying goes. Exploratory research is less structured than other types of research, and secondary data is often utilized.

One form of exploratory research is qualitative research. Qualitative research is any form of research that includes gathering data that is not quantitative, and often involves exploring questions such as why as much as what or how much . Different forms, such as depth interviews and focus group interviews, are common in marketing research.

The depth interview —engaging in detailed, one-on-one, question-and-answer sessions with potential buyers—is an exploratory research technique. However, unlike surveys, the people being interviewed aren’t asked a series of standard questions. Instead the interviewer is armed with some general topics and asks questions that are open ended, meaning that they allow the interviewee to elaborate. “How did you feel about the product after you purchased it?” is an example of a question that might be asked. A depth interview also allows a researcher to ask logical follow-up questions such as “Can you tell me what you mean when you say you felt uncomfortable using the service?” or “Can you give me some examples?” to help dig further and shed additional light on the research problem. Depth interviews can be conducted in person or over the phone. The interviewer either takes notes or records the interview.

Focus groups and case studies are often utilized for exploratory research as well. A focus group is a group of potential buyers who are brought together to discuss a marketing research topic with one another. A moderator is used to focus the discussion, the sessions are recorded, and the main points of consensus are later summarized by the market researcher. Textbook publishers often gather groups of professors at educational conferences to participate in focus groups. However, focus groups can also be conducted on the telephone, in online chat rooms, or both, using meeting software like WebEx. The basic steps of conducting a focus group are outlined below.

The Basic Steps of Conducting a Focus Group

Establish the objectives of the focus group. What is its purpose?
Identify the people who will participate in the focus group. What makes them qualified to participate? How many of them will you need and what they will be paid?
Obtain contact information for the participants and send out invitations (usually e-mails are most efficient).
Develop a list of questions.
Choose a facilitator.
Choose a location in which to hold the focus group and the method by which it will be recorded.
Conduct the focus group. If the focus group is not conducted electronically, include name tags for the participants, pens and notepads, any materials the participants need to see, and refreshments. Record participants’ responses.
Summarize the notes from the focus group and write a report for management.

A case study looks at how another company solved the problem that’s being researched. Sometimes multiple cases, or companies, are used in a study. Case studies nonetheless have a mixed reputation. Some researchers believe it’s hard to generalize, or apply, the results of a case study to other companies. Nonetheless, collecting information about companies that encountered the same problems your firm is facing can give you a certain amount of insight about what direction you should take. In fact, one way to begin a research project is to carefully study a successful product or service.

Two other types of qualitative data used for exploratory research are ethnographies and projective techniques. In an ethnography , researchers interview, observe, and often videotape people while they work, live, shop, and play. The Walt Disney Company has recently begun using ethnographers to uncover the likes and dislikes of boys aged six to fourteen, a financially attractive market segment for Disney, but one in which the company has been losing market share. The ethnographers visit the homes of boys, observe the things they have in their rooms to get a sense of their hobbies, and accompany them and their mothers when they shop to see where they go, what the boys are interested in, and what they ultimately buy. (The children get seventy-five dollars out of the deal, incidentally.) (Barnes, 2009)

Projective techniques are used to reveal information research respondents might not reveal by being asked directly. Asking a person to complete sentences such as the following is one technique:

People who buy Coach handbags __________.

(Will he or she reply with “are cool,” “are affluent,” or “are pretentious,” for example?)

KFC’s grilled chicken is ______.

Or the person might be asked to finish a story that presents a certain scenario. Word associations are also used to discern people’s underlying attitudes toward goods and services. Using a word-association technique, a market researcher asks a person to say or write the first word that comes to his or her mind in response to another word. If the initial word is “fast food,” what word does the person associate it with or respond with? Is it “McDonald’s”? If many people reply that way, and you’re conducting research for Burger King, that could indicate Burger King has a problem. However, if the research is being conducted for Wendy’s, which recently began running an advertising campaign to the effect that Wendy’s offerings are “better than fast food,” it could indicate that the campaign is working.

Completing cartoons is yet another type of projective technique. It’s similar to finishing a sentence or story, only with the pictures. People are asked to look at a cartoon such as the one shown in Figure 10.8 “Example of a Cartoon-Completion Projective Technique” . One of the characters in the picture will have made a statement, and the person is asked to fill in the empty cartoon “bubble” with how they think the second character will respond.

Figure 10.8 Example of a Cartoon-Completion Projective Technique

A cartoon of a man shaking a woman's hand saying

In some cases, your research might end with exploratory research. Perhaps you have discovered your organization lacks the resources needed to produce the product. In other cases, you might decide you need more in-depth, quantitative research such as descriptive research or causal research, which are discussed next. Most marketing research professionals advise using both types of research, if it’s feasible. On the one hand, the qualitative-type research used in exploratory research is often considered too “lightweight.” Remember earlier in the chapter when we discussed telephone answering machines and the hit TV sitcom Seinfeld ? Both product ideas were initially rejected by focus groups. On the other hand, relying solely on quantitative information often results in market research that lacks ideas.

The Stone Wheel—What One Focus Group Said

Watch the video to see a funny spoof on the usefulness—or lack of usefulness—of focus groups.

Descriptive Research

Anything that can be observed and counted falls into the category of descriptive research design. A study using a descriptive research design involves gathering hard numbers, often via surveys, to describe or measure a phenomenon so as to answer the questions of who , what , where , when , and how . “On a scale of 1–5, how satisfied were you with your service?” is a question that illustrates the information a descriptive research design is supposed to capture.

Physiological measurements also fall into the category of descriptive design. Physiological measurements measure people’s involuntary physical responses to marketing stimuli, such as an advertisement. Elsewhere, we explained that researchers have gone so far as to scan the brains of consumers to see what they really think about products versus what they say about them. Eye tracking is another cutting-edge type of physiological measurement. It involves recording the movements of a person’s eyes when they look at some sort of stimulus, such as a banner ad or a Web page. The Walt Disney Company has a research facility in Austin, Texas, that it uses to take physical measurements of viewers when they see Disney programs and advertisements. The facility measures three types of responses: people’s heart rates, skin changes, and eye movements (eye tracking) (Spangler, 2009).

Figure 10.9

A woman shows off her headgear for an eye-tracking study. The gear’s not exactly a fashion statement but . . .

lawrencegs – Google Glass – CC BY 2.0.

A strictly descriptive research design instrument—a survey, for example—can tell you how satisfied your customers are. It can’t, however, tell you why. Nor can an eye-tracking study tell you why people’s eyes tend to dwell on certain types of banner ads—only that they do. To answer “why” questions an exploratory research design or causal research design is needed (Wagner, 2007).

Causal Research

Causal research design examines cause-and-effect relationships. Using a causal research design allows researchers to answer “what if” types of questions. In other words, if a firm changes X (say, a product’s price, design, placement, or advertising), what will happen to Y (say, sales or customer loyalty)? To conduct causal research, the researcher designs an experiment that “controls,” or holds constant, all of a product’s marketing elements except one (or using advanced techniques of research, a few elements can be studied at the same time). The one variable is changed, and the effect is then measured. Sometimes the experiments are conducted in a laboratory using a simulated setting designed to replicate the conditions buyers would experience. Or the experiments may be conducted in a virtual computer setting.

You might think setting up an experiment in a virtual world such as the online game Second Life would be a viable way to conduct controlled marketing research. Some companies have tried to use Second Life for this purpose, but the results have been somewhat mixed as to whether or not it is a good medium for marketing research. The German marketing research firm Komjuniti was one of the first “real-world” companies to set up an “island” in Second Life upon which it could conduct marketing research. However, with so many other attractive fantasy islands in which to play, the company found it difficult to get Second Life residents, or players, to voluntarily visit the island and stay long enough so meaningful research could be conducted. (Plus, the “residents,” or players, in Second Life have been known to protest corporations invading their world. When the German firm Komjuniti created an island in Second Life to conduct marketing research, the residents showed up waving signs and threatening to boycott the island.) (Wagner, 2007)

Why is being able to control the setting so important? Let’s say you are an American flag manufacturer and you are working with Walmart to conduct an experiment to see where in its stores American flags should be placed so as to increase their sales. Then the terrorist attacks of 9/11 occur. In the days afterward, sales skyrocketed—people bought flags no matter where they were displayed. Obviously, the terrorist attacks in the United States would have skewed the experiment’s data.

An experiment conducted in a natural setting such as a store is referred to as a field experiment . Companies sometimes do field experiments either because it is more convenient or because they want to see if buyers will behave the same way in the “real world” as in a laboratory or on a computer. The place the experiment is conducted or the demographic group of people the experiment is administered to is considered the test market . Before a large company rolls out a product to the entire marketplace, it will often place the offering in a test market to see how well it will be received. For example, to compete with MillerCoors’ sixty-four-calorie beer MGD 64, Anheuser-Busch recently began testing its Select 55 beer in certain cities around the country (McWilliams, 2009).

Figure 10.10

Select 55 beer: Coming soon to a test market near you? (If you’re on a diet, you have to hope so!)

Martine – Le champagne – CC BY-NC 2.0.

Many companies use experiments to test all of their marketing communications. For example, the online discount retailer O.co (formerly called Overstock.com) carefully tests all of its marketing offers and tracks the results of each one. One study the company conducted combined twenty-six different variables related to offers e-mailed to several thousand customers. The study resulted in a decision to send a group of e-mails to different segments. The company then tracked the results of the sales generated to see if they were in line with the earlier experiment it had conducted that led it to make the offer.

Step 3: Design the Data-Collection Forms

If the behavior of buyers is being formally observed, and a number of different researchers are conducting observations, the data obviously need to be recorded on a standardized data-collection form that’s either paper or electronic. Otherwise, the data collected will not be comparable. The items on the form could include a shopper’s sex; his or her approximate age; whether the person seemed hurried, moderately hurried, or unhurried; and whether or not he or she read the label on products, used coupons, and so forth.

The same is true when it comes to surveying people with questionnaires. Surveying people is one of the most commonly used techniques to collect quantitative data. Surveys are popular because they can be easily administered to large numbers of people fairly quickly. However, to produce the best results, the questionnaire for the survey needs to be carefully designed.

Questionnaire Design

Most questionnaires follow a similar format: They begin with an introduction describing what the study is for, followed by instructions for completing the questionnaire and, if necessary, returning it to the market researcher. The first few questions that appear on the questionnaire are usually basic, warm-up type of questions the respondent can readily answer, such as the respondent’s age, level of education, place of residence, and so forth. The warm-up questions are then followed by a logical progression of more detailed, in-depth questions that get to the heart of the question being researched. Lastly, the questionnaire wraps up with a statement that thanks the respondent for participating in the survey and information and explains when and how they will be paid for participating. To see some examples of questionnaires and how they are laid out, click on the following link: http://cas.uah.edu/wrenb/mkt343/Project/Sample%20Questionnaires.htm .

How the questions themselves are worded is extremely important. It’s human nature for respondents to want to provide the “correct” answers to the person administering the survey, so as to seem agreeable. Therefore, there is always a hazard that people will try to tell you what you want to hear on a survey. Consequently, care needs to be taken that the survey questions are written in an unbiased, neutral way. In other words, they shouldn’t lead a person taking the questionnaire to answer a question one way or another by virtue of the way you have worded it. The following is an example of a leading question.

Don’t you agree that teachers should be paid more ?

The questions also need to be clear and unambiguous. Consider the following question:

Which brand of toothpaste do you use ?

The question sounds clear enough, but is it really? What if the respondent recently switched brands? What if she uses Crest at home, but while away from home or traveling, she uses Colgate’s Wisp portable toothpaste-and-brush product? How will the respondent answer the question? Rewording the question as follows so it’s more specific will help make the question clearer:

Which brand of toothpaste have you used at home in the past six months? If you have used more than one brand, please list each of them 1 .

Sensitive questions have to be asked carefully. For example, asking a respondent, “Do you consider yourself a light, moderate, or heavy drinker?” can be tricky. Few people want to admit to being heavy drinkers. You can “soften” the question by including a range of answers, as the following example shows:

How many alcoholic beverages do you consume in a week ?

__0–5 alcoholic beverages
__5–10 alcoholic beverages
__10–15 alcoholic beverages

Many people don’t like to answer questions about their income levels. Asking them to specify income ranges rather than divulge their actual incomes can help.

Other research question “don’ts” include using jargon and acronyms that could confuse people. “How often do you IM?” is an example. Also, don’t muddy the waters by asking two questions in the same question, something researchers refer to as a double-barreled question . “Do you think parents should spend more time with their children and/or their teachers?” is an example of a double-barreled question.

Open-ended questions , or questions that ask respondents to elaborate, can be included. However, they are harder to tabulate than closed-ended questions , or questions that limit a respondent’s answers. Multiple-choice and yes-and-no questions are examples of closed-ended questions.

Testing the Questionnaire

You have probably heard the phrase “garbage in, garbage out.” If the questions are bad, the information gathered will be bad, too. One way to make sure you don’t end up with garbage is to test the questionnaire before sending it out to find out if there are any problems with it. Is there enough space for people to elaborate on open-ended questions? Is the font readable? To test the questionnaire, marketing research professionals first administer it to a number of respondents face to face. This gives the respondents the chance to ask the researcher about questions or instructions that are unclear or don’t make sense to them. The researcher then administers the questionnaire to a small subset of respondents in the actual way the survey is going to be disseminated, whether it’s delivered via phone, in person, by mail, or online.

Getting people to participate and complete questionnaires can be difficult. If the questionnaire is too long or hard to read, many people won’t complete it. So, by all means, eliminate any questions that aren’t necessary. Of course, including some sort of monetary incentive for completing the survey can increase the number of completed questionnaires a market researcher will receive.

Step 4: Specify the Sample

Once you have created your questionnaire or other marketing study, how do you figure out who should participate in it? Obviously, you can’t survey or observe all potential buyers in the marketplace. Instead, you must choose a sample. A sample is a subset of potential buyers that are representative of your entire target market, or population being studied. Sometimes market researchers refer to the population as the universe to reflect the fact that it includes the entire target market, whether it consists of a million people, a hundred thousand, a few hundred, or a dozen. “All unmarried people over the age of eighteen who purchased Dirt Devil steam cleaners in the United States during 2011” is an example of a population that has been defined.

Obviously, the population has to be defined correctly. Otherwise, you will be studying the wrong group of people. Not defining the population correctly can result in flawed research, or sampling error. A sampling error is any type of marketing research mistake that results because a sample was utilized. One criticism of Internet surveys is that the people who take these surveys don’t really represent the overall population. On average, Internet survey takers tend to be more educated and tech savvy. Consequently, if they solely constitute your population, even if you screen them for certain criteria, the data you collect could end up being skewed.

The next step is to put together the sampling frame , which is the list from which the sample is drawn. The sampling frame can be put together using a directory, customer list, or membership roster (Wrenn et. al., 2007). Keep in mind that the sampling frame won’t perfectly match the population. Some people will be included on the list who shouldn’t be. Other people who should be included will be inadvertently omitted. It’s no different than if you were to conduct a survey of, say, 25 percent of your friends, using friends’ names you have in your cell phone. Most of your friends’ names are likely to be programmed into your phone, but not all of them. As a result, a certain degree of sampling error always occurs.

There are two main categories of samples in terms of how they are drawn: probability samples and nonprobability samples. A probability sample is one in which each would-be participant has a known and equal chance of being selected. The chance is known because the total number of people in the sampling frame is known. For example, if every other person from the sampling frame were chosen, each person would have a 50 percent chance of being selected.

A nonprobability sample is any type of sample that’s not drawn in a systematic way. So the chances of each would-be participant being selected can’t be known. A convenience sample is one type of nonprobability sample. It is a sample a researcher draws because it’s readily available and convenient to do so. Surveying people on the street as they pass by is an example of a convenience sample. The question is, are these people representative of the target market?

For example, suppose a grocery store needed to quickly conduct some research on shoppers to get ready for an upcoming promotion. Now suppose that the researcher assigned to the project showed up between the hours of 10 a.m. and 12 p.m. on a weekday and surveyed as many shoppers as possible. The problem is that the shoppers wouldn’t be representative of the store’s entire target market. What about commuters who stop at the store before and after work? Their views wouldn’t be represented. Neither would people who work the night shift or shop at odd hours. As a result, there would be a lot of room for sampling error in this study. For this reason, studies that use nonprobability samples aren’t considered as accurate as studies that use probability samples. Nonprobability samples are more often used in exploratory research.

Lastly, the size of the sample has an effect on the amount of sampling error. Larger samples generally produce more accurate results. The larger your sample is, the more data you will have, which will give you a more complete picture of what you’re studying. However, the more people surveyed or studied, the more costly the research becomes.

Statistics can be used to determine a sample’s optimal size. If you take a marketing research or statistics class, you will learn more about how to determine the optimal size.

Of course, if you hire a marketing research company, much of this work will be taken care of for you. Many marketing research companies, like ResearchNow, maintain panels of prescreened people they draw upon for samples. In addition, the marketing research firm will be responsible for collecting the data or contracting with a company that specializes in data collection. Data collection is discussed next.

Step 5: Collect the Data

As we have explained, primary marketing research data can be gathered in a number of ways. Surveys, taking physical measurements, and observing people are just three of the ways we discussed. If you’re observing customers as part of gathering the data, keep in mind that if shoppers are aware of the fact, it can have an effect on their behavior. For example, if a customer shopping for feminine hygiene products in a supermarket aisle realizes she is being watched, she could become embarrassed and leave the aisle, which would adversely affect your data. To get around problems such as these, some companies set up cameras or two-way mirrors to observe customers. Organizations also hire mystery shoppers to work around the problem. A mystery shopper is someone who is paid to shop at a firm’s establishment or one of its competitors to observe the level of service, cleanliness of the facility, and so forth, and report his or her findings to the firm.

Make Extra Money as a Mystery Shopper

Watch the YouTube video to get an idea of how mystery shopping works.

Survey data can be collected in many different ways and combinations of ways. The following are the basic methods used:

Face-to-face (can be computer aided)
Telephone (can be computer aided or completely automated)
Mail and hand delivery
E-mail and the Web

A face-to-face survey is, of course, administered by a person. The surveys are conducted in public places such as in shopping malls, on the street, or in people’s homes if they have agreed to it. In years past, it was common for researchers in the United States to knock on people’s doors to gather survey data. However, randomly collected door-to-door interviews are less common today, partly because people are afraid of crime and are reluctant to give information to strangers (McDaniel & Gates, 1998).

Nonetheless, “beating the streets” is still a legitimate way questionnaire data is collected. When the U.S. Census Bureau collects data on the nation’s population, it hand delivers questionnaires to rural households that do not have street-name and house-number addresses. And Census Bureau workers personally survey the homeless to collect information about their numbers. Face-to-face surveys are also commonly used in third world countries to collect information from people who cannot read or lack phones and computers.

A plus of face-to-face surveys is that they allow researchers to ask lengthier, more complex questions because the people being surveyed can see and read the questionnaires. The same is true when a computer is utilized. For example, the researcher might ask the respondent to look at a list of ten retail stores and rank the stores from best to worst. The same question wouldn’t work so well over the telephone because the person couldn’t see the list. The question would have to be rewritten. Another drawback with telephone surveys is that even though federal and state “do not call” laws generally don’t prohibit companies from gathering survey information over the phone, people often screen such calls using answering machines and caller ID.

Probably the biggest drawback of both surveys conducted face-to-face and administered over the phone by a person is that they are labor intensive and therefore costly. Mailing out questionnaires is costly, too, and the response rates can be rather low. Think about why that might be so: if you receive a questionnaire in the mail, it is easy to throw it in the trash; it’s harder to tell a market researcher who approaches you on the street that you don’t want to be interviewed.

By contrast, gathering survey data collected by a computer, either over the telephone or on the Internet, can be very cost-effective and in some cases free. SurveyMonkey and Zoomerang are two Web sites that will allow you to create online questionnaires, e-mail them to up to one hundred people for free, and view the responses in real time as they come in. For larger surveys, you have to pay a subscription price of a few hundred dollars. But that still can be extremely cost-effective. The two Web sites also have a host of other features such as online-survey templates you can use to create your questionnaire, a way to set up automatic reminders sent to people who haven’t yet completed their surveys, and tools you can use to create graphics to put in your final research report. To see how easy it is to put together a survey in SurveyMonkey, click on the following link: http://help.surveymonkey.com/app/tutorials/detail/a_id/423 .

Like a face-to-face survey, an Internet survey can enable you to show buyers different visuals such as ads, pictures, and videos of products and their packaging. Web surveys are also fast, which is a major plus. Whereas face-to-face and mailed surveys often take weeks to collect, you can conduct a Web survey in a matter of days or even hours. And, of course, because the information is electronically gathered it can be automatically tabulated. You can also potentially reach a broader geographic group than you could if you had to personally interview people. The Zoomerang Web site allows you to create surveys in forty different languages.

Another plus for Web and computer surveys (and electronic phone surveys) is that there is less room for human error because the surveys are administered electronically. For instance, there’s no risk that the interviewer will ask a question wrong or use a tone of voice that could mislead the respondents. Respondents are also likely to feel more comfortable inputting the information into a computer if a question is sensitive than they would divulging the information to another person face-to-face or over the phone. Given all of these advantages, it’s not surprising that the Internet is quickly becoming the top way to collect primary data. However, like mail surveys, surveys sent to people over the Internet are easy to ignore.

Lastly, before the data collection process begins, the surveyors and observers need to be trained to look for the same things, ask questions the same way, and so forth. If they are using rankings or rating scales, they need to be “on the same page,” so to speak, as to what constitutes a high ranking or a low ranking. As an analogy, you have probably had some teachers grade your college papers harder than others. The goal of training is to avoid a wide disparity between how different observers and interviewers record the data.

Figure 10.11

Training people so they know what constitutes different ratings when they are collecting data will improve the quality of the information gathered in a marketing research study.

Ricardo Rodriquez – Satisfaction survey – CC BY-NC-ND 2.0.

For example, if an observation form asks the observers to describe whether a shopper’s behavior is hurried, moderately hurried, or unhurried, they should be given an idea of what defines each rating. Does it depend on how much time the person spends in the store or in the individual aisles? How fast they walk? In other words, the criteria and ratings need to be spelled out.

Collecting International Marketing Research Data

Gathering marketing research data in foreign countries poses special challenges. However, that doesn’t stop firms from doing so. Marketing research companies are located all across the globe, in fact. Eight of the ten largest marketing research companies in the world are headquartered in the United States. However, five of these eight firms earn more of their revenues abroad than they do in the United States. There’s a reason for this: many U.S. markets were saturated, or tapped out, long ago in terms of the amount that they can grow. Coke is an example. As you learned earlier in the book, most of the Coca-Cola Company’s revenues are earned in markets abroad. To be sure, the United States is still a huge market when it comes to the revenues marketing research firms generate by conducting research in the country: in terms of their spending, American consumers fuel the world’s economic engine. Still, emerging countries with growing middle classes, such as China, India, and Brazil, are hot new markets companies want to tap.

And how do you figure out whom to research in foreign countries? That in itself is a problem. In the United States, researchers often ask if they can talk to the heads of households to conduct marketing research. But in countries in which domestic servants or employees are common, the heads of households aren’t necessarily the principal shoppers; their domestic employees are (Malhotra).

Translating surveys is also an issue. Have you ever watched the TV comedians Jay Leno and David Letterman make fun of the English translations found on ethnic menus and products? Research tools such as surveys can suffer from the same problem. Hiring someone who is bilingual to translate a survey into another language can be a disaster if the person isn’t a native speaker of the language to which the survey is being translated.

One way companies try to deal with translation problems is by using back translation. When back translation is used, a native speaker translates the survey into the foreign language and then translates it back again to the original language to determine if there were gaps in meaning—that is, if anything was lost in translation. And it’s not just the language that’s an issue. If the research involves any visual images, they, too, could be a point of confusion. Certain colors, shapes, and symbols can have negative connotations in other countries. For example, the color white represents purity in many Western cultures, but in China, it is the color of death and mourning (Zouhali-Worrall, 2008). Also, look back at the cartoon-completion exercise in Figure 10.8 “Example of a Cartoon-Completion Projective Technique” . What would women in Muslim countries who aren’t allowed to converse with male sellers think of it? Chances are, the cartoon wouldn’t provide you with the information you’re seeking if Muslim women in some countries were asked to complete it.

One way marketing research companies are dealing with the complexities of global research is by merging with or acquiring marketing research companies abroad. The Nielsen Company is the largest marketing research company in the world. The firm operates in more than a hundred countries and employs more than forty thousand people. Many of its expansions have been the result of acquisitions and mergers.

Step 6: Analyze the Data

Step 6 involves analyzing the data to ensure it’s as accurate as possible. If the research is collected by hand using a pen and pencil, it’s entered into a computer. Or respondents might have already entered the information directly into a computer. For example, when Toyota goes to an event such as a car show, the automaker’s marketing personnel ask would-be buyers to complete questionnaires directly on computers. Companies are also beginning to experiment with software that can be used to collect data using mobile phones.

Once all the data is collected, the researchers begin the data cleaning , which is the process of removing data that have accidentally been duplicated (entered twice into the computer) or correcting data that have obviously been recorded wrong. A program such as Microsoft Excel or a statistical program such as Predictive Analytics Software (PASW, which was formerly known as SPSS) is then used to tabulate, or calculate, the basic results of the research, such as the total number of participants and how collectively they answered various questions. The programs can also be used to calculate averages, such as the average age of respondents, their average satisfaction, and so forth. The same can done for percentages, and other values you learned about, or will learn about, in a statistics course, such as the standard deviation, mean, and median for each question.

The information generated by the programs can be used to draw conclusions, such as what all customers might like or not like about an offering based on what the sample group liked or did not like. The information can also be used to spot differences among groups of people. For example, the research might show that people in one area of the country like the product better than people in another area. Trends to predict what might happen in the future can also be spotted.

If there are any open-ended questions respondents have elaborated upon—for example, “Explain why you like the current brand you use better than any other brand”—the answers to each are pasted together, one on top of another, so researchers can compare and summarize the information. As we have explained, qualitative information such as this can give you a fuller picture of the results of the research.

Part of analyzing the data is to see if it seems sound. Does the way in which the research was conducted seem sound? Was the sample size large enough? Are the conclusions that become apparent from it reasonable?

The two most commonly used criteria used to test the soundness of a study are (1) validity and (2) reliability. A study is valid if it actually tested what it was designed to test. For example, did the experiment you ran in Second Life test what it was designed to test? Did it reflect what could really happen in the real world? If not, the research isn’t valid. If you were to repeat the study, and get the same results (or nearly the same results), the research is said to be reliable . If you get a drastically different result if you repeat the study, it’s not reliable. The data collected, or at least some it, can also be compared to, or reconciled with, similar data from other sources either gathered by your firm or by another organization to see if the information seems on target.

Stage 7: Write the Research Report and Present Its Findings

If you end up becoming a marketing professional and conducting a research study after you graduate, hopefully you will do a great job putting the study together. You will have defined the problem correctly, chosen the right sample, collected the data accurately, analyzed it, and your findings will be sound. At that point, you will be required to write the research report and perhaps present it to an audience of decision makers. You will do so via a written report and, in some cases, a slide or PowerPoint presentation based on your written report.

The six basic elements of a research report are as follows.

Title Page . The title page explains what the report is about, when it was conducted and by whom, and who requested it.
Table of Contents . The table of contents outlines the major parts of the report, as well as any graphs and charts, and the page numbers on which they can be found.
Executive Summary . The executive summary summarizes all the details in the report in a very quick way. Many people who receive the report—both executives and nonexecutives—won’t have time to read the entire report. Instead, they will rely on the executive summary to quickly get an idea of the study’s results and what to do about those results.

Methodology and Limitations . The methodology section of the report explains the technical details of how the research was designed and conducted. The section explains, for example, how the data was collected and by whom, the size of the sample, how it was chosen, and whom or what it consisted of (e.g., the number of women versus men or children versus adults). It also includes information about the statistical techniques used to analyze the data.

Every study has errors—sampling errors, interviewer errors, and so forth. The methodology section should explain these details, so decision makers can consider their overall impact. The margin of error is the overall tendency of the study to be off kilter—that is, how far it could have gone wrong in either direction. Remember how newscasters present the presidential polls before an election? They always say, “This candidate is ahead 48 to 44 percent, plus or minus 2 percent.” That “plus or minus” is the margin of error. The larger the margin of error is, the less likely the results of the study are accurate. The margin of error needs to be included in the methodology section.

Findings . The findings section is a longer, fleshed-out version of the executive summary that goes into more detail about the statistics uncovered by the research that bolster the study’s findings. If you have related research or secondary data on hand that back up the findings, it can be included to help show the study did what it was designed to do.
Recommendations . The recommendations section should outline the course of action you think should be taken based on the findings of the research and the purpose of the project. For example, if you conducted a global market research study to identify new locations for stores, make a recommendation for the locations (Mersdorf, 2009).

As we have said, these are the basic sections of a marketing research report. However, additional sections can be added as needed. For example, you might need to add a section on the competition and each firm’s market share. If you’re trying to decide on different supply chain options, you will need to include a section on that topic.

As you write the research report, keep your audience in mind. Don’t use technical jargon decision makers and other people reading the report won’t understand. If technical terms must be used, explain them. Also, proofread the document to ferret out any grammatical errors and typos, and ask a couple of other people to proofread behind you to catch any mistakes you might have missed. If your research report is riddled with errors, its credibility will be undermined, even if the findings and recommendations you make are extremely accurate.

Many research reports are presented via PowerPoint. If you’re asked to create a slideshow presentation from the report, don’t try to include every detail in the report on the slides. The information will be too long and tedious for people attending the presentation to read through. And if they do go to the trouble of reading all the information, they probably won’t be listening to the speaker who is making the presentation.

Instead of including all the information from the study in the slides, boil each section of the report down to key points and add some “talking points” only the presenter will see. After or during the presentation, you can give the attendees the longer, paper version of the report so they can read the details at a convenient time, if they choose to.

Key Takeaway

Step 1 in the marketing research process is to define the problem. Businesses take a look at what they believe are symptoms and try to drill down to the potential causes so as to precisely define the problem. The next task for the researcher is to put into writing the research objective, or goal, the research is supposed to accomplish. Step 2 in the process is to design the research. The research design is the “plan of attack.” It outlines what data you are going to gather, from whom, how, and when, and how you’re going to analyze it once it has been obtained. Step 3 is to design the data-collection forms, which need to be standardized so the information gathered on each is comparable. Surveys are a popular way to gather data because they can be easily administered to large numbers of people fairly quickly. However, to produce the best results, survey questionnaires need to be carefully designed and pretested before they are used. Step 4 is drawing the sample, or a subset of potential buyers who are representative of your entire target market. If the sample is not correctly selected, the research will be flawed. Step 5 is to actually collect the data, whether it’s collected by a person face-to-face, over the phone, or with the help of computers or the Internet. The data-collection process is often different in foreign countries. Step 6 is to analyze the data collected for any obvious errors, tabulate the data, and then draw conclusions from it based on the results. The last step in the process, Step 7, is writing the research report and presenting the findings to decision makers.

Review Questions

Explain why it’s important to carefully define the problem or opportunity a marketing research study is designed to investigate.
Describe the different types of problems that can occur when marketing research professionals develop questions for surveys.
How does a probability sample differ from a nonprobability sample?
What makes a marketing research study valid? What makes a marketing research study reliable?
What sections should be included in a marketing research report? What is each section designed to do?

1 “Questionnaire Design,” QuickMBA , http://www.quickmba.com/marketing/research/qdesign (accessed December 14, 2009).

Barnes, B., “Disney Expert Uses Science to Draw Boy Viewers,” New York Times , April 15, 2009, http://www.nytimes.com/2009/04/14/arts/television/14boys.html?pagewanted=1&_r=1 (accessed December 14, 2009).

Burns A. and Ronald Bush, Marketing Research , 6th ed. (Upper Saddle River, NJ: Prentice Hall, 2010), 85.

Malhotra, N., Marketing Research: An Applied Approach , 6th ed. (Upper Saddle River, NJ: Prentice Hall), 764.

McDaniel, C. D. and Roger H. Gates, Marketing Research Essentials , 2nd ed. (Cincinnati: South-Western College Publishing, 1998), 61.

McWilliams, J., “A-B Puts Super-Low-Calorie Beer in Ring with Miller,” St. Louis Post-Dispatch , August 16, 2009, http://www.stltoday.com/business/next-matchup-light-weights-a-b-puts-super-low-calorie/article_47511bfe-18ca-5979-bdb9-0526c97d4edf.html (accessed April 13, 2012).

Mersdorf, S., “How to Organize Your Next Survey Report,” Cvent , August 24, 2009, http://survey.cvent.com/blog/cvent-survey/0/0/how-to-organize-your-next-survey-report (accessed December 14, 2009).

Rappeport A. and David Gelles, “Facebook to Form Alliance with Nielsen,” Financial Times , September 23, 2009, 16.

Spangler, T., “Disney Lab Tracks Feelings,” Multichannel News 30, no. 30 (August 3, 2009): 26.

Wagner, J., “Marketing in Second Life Doesn’t Work…Here Is Why!” GigaOM , April 4, 2007, http://gigaom.com/2007/04/04/3-reasons-why-marketing-in-second-life-doesnt-work (accessed December 14, 2009).

Wrenn, B., Robert E. Stevens, and David L. Loudon, Marketing Research: Text and Cases , 2nd ed. (Binghamton, NY: Haworth Press, 2007), 180.

Zouhali-Worrall, M., “Found in Translation: Avoiding Multilingual Gaffes,” CNNMoney.com , July 14, 2008, http://money.cnn.com/2008/07/07/smallbusiness/language_translation.fsb/index.htm (accessed December 14, 2009).

Share This Book

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

4.1 The Marketing Research Process – Steps 1 and 2

The marketing research process.

The basic steps used to conduct marketing research, defining the problem, designing the research, designing the data collections forms, specifying the sample, collecting the data, analyzing the data, and writing / presenting the findings, are shown below. After the graphic, each step will be explained in detail.

Figure 4.1.1: The Marketing Research Process

Step 1: Define the Problem (or Opportunity)

There’s a saying in marketing research that a problem half defined is a problem half solved. Defining the “problem” of the research sounds simple, doesn’t it? Suppose your product is tutoring other students in a subject you’re a whiz at. You have been tutoring for a while, and people have begun to realize you’re very good at it. Then, suddenly, your business drops off. Or it explodes, and you can’t cope with the number of students you’re being asked to help. If the business has exploded, should you try to expand your services? Perhaps you should subcontract with some other “whiz” students. You would send them students to be tutored, and they would give you a cut of their pay for each student you referred to them.

In what semester(s) did your tutoring revenues fall (or rise)?
In what subject areas did your tutoring revenues fall (or rise)?
In what sales channels did revenues fall (or rise): Were there fewer (or more) referrals from professors or other students? Did the ad you ran result in fewer (or more) referrals this month than in the past months?
Among what demographic groups did your revenues fall (or rise)—women or men, people with certain majors, or first-year, second-, third-, or fourth-year students?

A hypothesis should then be constructed. The hypothesis is an educated guess as to what the researcher expects to discover. Every bit of data collected, should go towards proving or disproving the hypothesis. Once this is clear, the next task for the researcher is to put into writing the research objective. The research objective is the goal(s) the research is supposed to accomplish. The marketing research objective for your tutoring business might read as follows:

To survey college professors who teach 100- and 200-level math courses to determine why the number of students referred for tutoring dropped in the second semester.

II. Step 2: Design the Research

There are two basic types of data you can gather. The first type is primary data. Primary data is information you collect yourself, using hands-on tools such as interviews or surveys, specifically for the research project you’re conducting. Secondary data is data that has already been collected by someone else, or data you have already collected for another purpose. Collecting primary data is more time consuming, work intensive, and expensive than collecting secondary data. Consequently, you should always try to collect secondary data first to solve your research problem, if you can. A great deal of research on a wide variety of topics already exists. If this research contains the answer to your question, there is no need for you to replicate it. Why reinvent the wheel?

Sources of Secondary Data

Your company’s internal records are a source of secondary data. Data that has been collected as part of your marketing intelligence gathering efforts for other projects are secondary data. Syndicated data can be purchased from other firms, typically from research companies. Syndicated research is primary data that marketing research firms collect on a regular basis and sell to other companies. J.D. Power & Associates is a provider of syndicated research. The company conducts independent, unbiased surveys of customer satisfaction, product quality, and buyer behavior for various industries. The company is best known for its research in the automobile sector. Another of the best-known sellers of syndicated research is the Nielsen Company, which produces the Nielsen ratings. The Nielsen ratings measure the size of television, radio, and newspaper audiences in various markets. You have probably read or heard about TV shows that get the highest (Nielsen) ratings. (Arbitron does the same thing for radio ratings.) Nielsen, along with its main competitor, Information Resources, Inc. (IRI), also sells businesses scanner-based research. Scanner-based research is information collected by scanners at checkout stands in stores. Each week Nielsen and IRI collect information on the millions of purchases made at stores. The companies then compile the information and sell it to firms in various industries that subscribe to their services. The Nielsen Company has also recently teamed up with Facebook to collect marketing research information. Via Facebook, users will see surveys in some of the spaces in which they used to see online ads (Rappeport, Gelles, 2009).

The homepage of the website MarketResearch.com. The homepage shows how users can browse the website's collection by market or topic.

Market research aggregators buy research reports from other marketing research companies and then resell them in part or in whole to other companies so they don’t have to gather primary data.

Source: http://www.marketresearch.com .

The library is a good place to gather free secondary data. It has searchable databases as well as handbooks, dictionaries, and books, some of which you can access online. Government agencies also collect and report information on demographics, economic and employment data, health information, and balance-of-trade statistics, among a lot of other information. The U.S. Census Bureau collects census data every ten years to gather information about who lives where. Basic demographic information about sex, age, race, and types of housing in which people live in each U.S. state, metropolitan area, and rural area is gathered so that population shifts can be tracked for various purposes, including determining the number of legislators each state should have in the U.S. House of Representatives. For the U.S. government, this is primary data. For marketing managers it is an important source of secondary data.

Table 4.1: Examples of Primary Data Sources versus Secondary Data Sources

Gauging the Quality of Secondary Data

Gauging the Credibility of Secondary Data: Questions to Ask

Who gathered this information?
For what purpose?
What does the person or organization that gathered the information have to gain by doing so?
Was the information gathered and reported in a systematic manner?
Is the source of the information accepted as an authority by other experts in the field?
Does the article provide objective evidence to support the position presented?

Types of Research Design

Exploratory research design
Descriptive research design
Causal research design (experiments)

Exploratory Research

An exploratory research design is useful when you are initially investigating a problem but haven’t defined it well enough to do an in-depth study. Perhaps via your regular market intelligence, you have spotted what appears to be a new opportunity in the marketplace. You would then do exploratory research to investigate it further and “get your feet wet,” as the saying goes. Exploratory research is less structured than other types of research, and secondary data is often utilized.

One form of exploratory research is qualitative research. Qualitative research is any form of research that includes gathering data that is not quantitative, and involves exploring questions such as why as much as what or how much . Different forms, such as in-depth interviews and focus group interviews, are common in marketing research.

The in-depth interview—engaging in detailed, one-on-one, question-and-answer sessions with potential buyers—is an exploratory research technique. However, unlike surveys, the people being interviewed aren’t asked a series of standard questions. Instead the interviewer is armed with some general topics and asks questions that are open ended, meaning that they allow the interviewee to elaborate. “How did you feel about the product after you purchased it?” is an example of a question that might be asked. An in-depth interview also allows a researcher to ask logical follow-up questions such as “Can you tell me what you mean when you say you felt uncomfortable using the service?” or “Can you give me some examples?” to help dig further and shed additional light on the research problem. In-depth interviews can be conducted in person, online, or over the phone. The interviewer either takes notes or records the interview.

The Basic Steps of Conducting a Focus Group

Establish the objectives of the focus group. What is its purpose?
Identify the people who will participate in the focus group. What makes them qualified to participate? How many of them will you need and what they will be paid?
Obtain contact information for the participants and send out invitations (usually e-mails are most efficient).
Develop a list of questions.
Choose a facilitator.
Choose a location in which to hold the focus group and the method by which it will be recorded.
Conduct the focus group. If the focus group is not conducted electronically, include name tags for the participants, pens and notepads, any materials the participants need to see, and refreshments. Record participants’ responses.
Summarize the notes from the focus group and write a report for management.

Two other types of qualitative data used for exploratory research are ethnographies and projective techniques. In an ethnography, researchers interview, observe, and often videotape people while they work, live, shop, and play. The Walt Disney Company has recently begun using ethnographers to uncover the likes and dislikes of boys aged six to fourteen, a financially attractive market segment for Disney, but one in which the company has been losing market share. The ethnographers visit the homes of boys, observe the things they have in their rooms to get a sense of their hobbies, and accompany them and their mothers when they shop to see where they go, what the boys are interested in, and what they ultimately buy. (The children get seventy-five dollars out of the deal, incidentally.) (Barnes, 2009)

Projective techniques are used to reveal information research respondents might not reveal by being asked directly. Asking a person to complete sentences such as the following is one technique:

People who buy Coach handbags __________.

(Will he or she reply with “are cool,” “are affluent,” or “are pretentious,” for example?)

KFC’s grilled chicken is ______.

Completing cartoons is yet another type of projective technique. It’s similar to finishing a sentence or story, only with the pictures. People are asked to look at a cartoon such as the one shown in Figure 4.2 “Example of a Cartoon-Completion Projective Technique” . One of the characters in the picture will have made a statement, and the person is asked to fill in the empty cartoon “bubble” with how they think the second character will respond. In this example, how do you think the woman would reply to being asked, “Thanks for doing business with us today. Is there a way we can better serve you in the future?”

Figure 4.1.2: Example of a Cartoon-Completion Projective Technique

In some cases, your research might end with exploratory research. Perhaps you have discovered your organization lacks the resources needed to produce the product. In other cases, you might decide you need more in-depth, quantitative research such as descriptive research or causal research, which are discussed next. Most marketing research professionals advise using both types of research, if it’s feasible. On the one hand, the qualitative-type research used in exploratory research is often considered too “lightweight.” On the other hand, relying solely on quantitative information often results in market research that lacks ideas.

Descriptive Research

Google glasses with eye-tracking technology.

A woman shows off her headgear for an eye-tracking study. The gear’s not exactly a fashion statement but . . .

lawrencegs – Google Glass – CC BY 2.0.

Causal Research

You might think setting up an experiment in a virtual world such an online game would be a viable way to conduct controlled marketing research. Some companies have tried to use Second Life for this purpose, but the results have been somewhat mixed as to whether or not it is a good medium for marketing research. The German marketing research firm Komjuniti was one of the first “real-world” companies to set up an “island” in Second Life upon which it could conduct marketing research. However, with so many other attractive fantasy islands in which to play, the company found it difficult to get Second Life residents, or players, to voluntarily visit the island and stay long enough so meaningful research could be conducted. (Plus, the “residents,” or players, in Second Life have been known to protest corporations invading their world. When the German firm Komjuniti created an island in Second Life to conduct marketing research, the residents showed up waving signs and threatening to boycott the island.) (Wagner, 2007)

An experiment conducted in a natural setting such as a store is referred to as a field experiment. Companies sometimes do field experiments either because it is more convenient or because they want to see if buyers will behave the same way in the “real world” as in a laboratory or on a computer. The place the experiment is conducted or the demographic group of people the experiment is administered to is considered the test market. Before a large company rolls out a product to the entire marketplace, it will often place the offering in a test market to see how well it will be received. For example, to compete with MillerCoors’ sixty-four-calorie beer MGD 64, Anheuser-Busch began testing its Select 55 beer in certain cities around the country (McWilliams, 2009).

Select 55 beer: Coming soon to a test market near you? (If you’re on a diet, you have to hope so!)

Martine – Le champagne – CC BY-NC 2.0.

You Try It!

Share This Book

Root out friction in every digital experience, super-charge conversion rates, and optimize digital self-service

Uncover insights from any interaction, deliver AI-powered agent coaching, and reduce cost to serve

Increase revenue and loyalty with real-time insights and recommendations delivered to teams on the ground

Know how your people feel and empower managers to improve employee engagement, productivity, and retention

Take action in the moments that matter most along the employee journey and drive bottom line growth

Whatever they’re are saying, wherever they’re saying it, know exactly what’s going on with your people

Get faster, richer insights with qual and quant tools that make powerful market research available to everyone

Run concept tests, pricing studies, prototyping + more with fast, powerful studies designed by UX research experts

Track your brand performance 24/7 and act quickly to respond to opportunities and challenges in your market

Explore the platform powering Experience Management

Free Account
For Digital
For Customer Care
For Human Resources
For Researchers
Financial Services
All Industries

Popular Use Cases

Customer Experience
Employee Experience
Employee Exit Interviews
Net Promoter Score
Voice of Customer
Customer Success Hub
Product Documentation
Training & Certification
XM Institute
Popular Resources
Customer Stories

Market Research

Artificial Intelligence
Partnerships
Marketplace

The annual gathering of the experience leaders at the world’s iconic brands building breakthrough business results, live in Salt Lake City.

English/AU & NZ
Español/Europa
Español/América Latina
Português Brasileiro
REQUEST DEMO

9 Key stages in your marketing research process

You can conduct your own marketing research. Follow these steps, add your own flair, knowledge and creativity, and you’ll have bespoke research to be proud of.

Marketing research is the term used to cover the concept, development, placement and evolution of your product or service, its growing customer base and its branding – starting with brand awareness , and progressing to (everyone hopes) brand equity . Like any research, it needs a robust process to be credible and useful.

Marketing research uses four essential key factors known as the ‘marketing mix’ , or the Four Ps of Marketing :

Product (goods or service)
Price ( how much the customer pays )
Place (where the product is marketed)
Promotion (such as advertising and PR)

These four factors need to work in harmony for a product or service to be successful in its marketplace.

The marketing research process – an overview

A typical marketing research process is as follows:

Identify an issue, discuss alternatives and set out research objectives
Develop a research program
Choose a sample
Gather information
Gather data
Organize and analyze information and data
Present findings
Make research-based decisions
Take action based on insights

Step 1: Defining the marketing research problem

Defining a problem is the first step in the research process. In many ways, research starts with a problem facing management. This problem needs to be understood, the cause diagnosed, and solutions developed.

However, most management problems are not always easy to research, so they must first be translated into research problems. Once you approach the problem from a research angle, you can find a solution. For example, “sales are not growing” is a management problem, but translated into a research problem, it becomes “ why are sales not growing?” We can look at the expectations and experiences of several groups : potential customers, first-time buyers, and repeat purchasers. We can question whether the lack of sales is due to:

Poor expectations that lead to a general lack of desire to buy, or
Poor performance experience and a lack of desire to repurchase.

This, then, is the difference between a management problem and a research problem. Solving management problems focuses on actions: Do we advertise more? Do we change our advertising message? Do we change an under-performing product configuration? And if so, how?

Defining research problems, on the other hand, focus on the whys and hows, providing the insights you need to solve your management problem.

Step 2: Developing a research program: method of inquiry

The scientific method is the standard for investigation. It provides an opportunity for you to use existing knowledge as a starting point, and proceed impartially.

The scientific method includes the following steps:

Define a problem
Develop a hypothesis
Make predictions based on the hypothesis
Devise a test of the hypothesis
Conduct the test
Analyze the results

This terminology is similar to the stages in the research process. However, there are subtle differences in the way the steps are performed:

the scientific research method is objective and fact-based, using quantitative research and impartial analysis
the marketing research process can be subjective, using opinion and qualitative research, as well as personal judgment as you collect and analyze data

Step 3: Developing a research program: research method

As well as selecting a method of inquiry (objective or subjective), you must select a research method . There are two primary methodologies that can be used to answer any research question:

Experimental research : gives you the advantage of controlling extraneous variables and manipulating one or more variables that influence the process being implemented.
Non-experimental research : allows observation but not intervention – all you do is observe and report on your findings.

Step 4: Developing a research program: research design

Research design is a plan or framework for conducting marketing research and collecting data. It is defined as the specific methods and procedures you use to get the information you need.

There are three core types of marketing research designs: exploratory, descriptive, and causal . A thorough marketing research process incorporates elements of all of them.

Exploratory marketing research

This is a starting point for research. It’s used to reveal facts and opinions about a particular topic, and gain insight into the main points of an issue. Exploratory research is too much of a blunt instrument to base conclusive business decisions on, but it gives the foundation for more targeted study. You can use secondary research materials such as trade publications, books, journals and magazines and primary research using qualitative metrics, that can include open text surveys, interviews and focus groups.

Descriptive marketing research

This helps define the business problem or issue so that companies can make decisions, take action and monitor progress. Descriptive research is naturally quantitative – it needs to be measured and analyzed statistically , using more targeted surveys and questionnaires. You can use it to capture demographic information , evaluate a product or service for market, and monitor a target audience’s opinion and behaviors. Insights from descriptive research can inform conclusions about the market landscape and the product’s place in it.

Causal marketing research

This is useful to explore the cause and effect relationship between two or more variables. Like descriptive research , it uses quantitative methods, but it doesn’t merely report findings; it uses experiments to predict and test theories about a product or market. For example, researchers may change product packaging design or material, and measure what happens to sales as a result.

Step 5: Choose your sample

Your marketing research project will rarely examine an entire population. It’s more practical to use a sample - a smaller but accurate representation of the greater population. To design your sample, you’ll need to answer these questions:

Which base population is the sample to be selected from? Once you’ve established who your relevant population is (your research design process will have revealed this), you have a base for your sample. This will allow you to make inferences about a larger population.
What is the method (process) for sample selection? There are two methods of selecting a sample from a population:

1. Probability sampling : This relies on a random sampling of everyone within the larger population.

2. Non-probability sampling : This is based in part on the investigator’s judgment, and often uses convenience samples, or by other sampling methods that do not rely on probability.

What is your sample size? This important step involves cost and accuracy decisions. Larger samples generally reduce sampling error and increase accuracy, but also increase costs. Find out your perfect sample size with our calculator .

Step 6: Gather data

Your research design will develop as you select techniques to use. There are many channels for collecting data, and it’s helpful to differentiate it into O-data (Operational) and X-data (Experience):

O-data is your business’s hard numbers like costs, accounting, and sales. It tells you what has happened, but not why.
X-data gives you insights into the thoughts and emotions of the people involved: employees, customers, brand advocates.

When you combine O-data with X-data, you’ll be able to build a more complete picture about success and failure - you’ll know why. Maybe you’ve seen a drop in sales (O-data) for a particular product. Maybe customer service was lacking, the product was out of stock, or advertisements weren’t impactful or different enough: X-data will reveal the reason why those sales dropped. So, while differentiating these two data sets is important, when they are combined, and work with each other, the insights become powerful.

With mobile technology, it has become easier than ever to collect data. Survey research has come a long way since market researchers conducted face-to-face, postal, or telephone surveys. You can run research through:

Social media ( polls and listening )

Another way to collect data is by observation. Observing a customer’s or company’s past or present behavior can predict future purchasing decisions. Data collection techniques for predicting past behavior can include market segmentation , customer journey mapping and brand tracking .

Regardless of how you collect data, the process introduces another essential element to your research project: the importance of clear and constant communication .

And of course, to analyze information from survey or observation techniques, you must record your results . Gone are the days of spreadsheets. Feedback from surveys and listening channels can automatically feed into AI-powered analytics engines and produce results, in real-time, on dashboards.

Step 7: Analysis and interpretation

The words ‘ statistical analysis methods ’ aren’t usually guaranteed to set a room alight with excitement, but when you understand what they can do, the problems they can solve and the insights they can uncover, they seem a whole lot more compelling.

Statistical tests and data processing tools can reveal:

Whether data trends you see are meaningful or are just chance results
Your results in the context of other information you have
Whether one thing affecting your business is more significant than others
What your next research area should be
Insights that lead to meaningful changes

There are several types of statistical analysis tools used for surveys. You should make sure that the ones you choose:

Work on any platform - mobile, desktop, tablet etc.
Integrate with your existing systems
Are easy to use with user-friendly interfaces, straightforward menus, and automated data analysis
Incorporate statistical analysis so you don’t just process and present your data, but refine it, and generate insights and predictions.

Here are some of the most common tools:

Benchmarking : a way of taking outside factors into account so that you can adjust the parameters of your research. It ‘levels the playing field’ – so that your data and results are more meaningful in context. And gives you a more precise understanding of what’s happening.
Regression analysis : this is used for working out the relationship between two (or more) variables. It is useful for identifying the precise impact of a change in an independent variable.
T-test is used for comparing two data groups which have different mean values. For example, do women and men have different mean heights?
Analysis of variance (ANOVA) Similar to the T-test, ANOVA is a way of testing the differences between three or more independent groups to see if they’re statistically significant.
Cluster analysis : This organizes items into groups, or clusters, based on how closely associated they are.
Factor analysis: This is a way of condensing many variables into just a few, so that your research data is less unwieldy to work with.
Conjoint analysis : this will help you understand and predict why people make the choices they do. It asks people to make trade-offs when making decisions, just as they do in the real world, then analyzes the results to give the most popular outcome.
Crosstab analysis : this is a quantitative market research tool used to analyze ‘categorical data’ - variables that are different and mutually exclusive, such as: ‘men’ and ‘women’, or ‘under 30’ and ‘over 30’.
Text analysis and sentiment analysis : Analyzing human language and emotions is a rapidly-developing form of data processing, assigning positive, negative or neutral sentiment to customer messages and feedback.

Stats IQ can perform the most complicated statistical tests at the touch of a button using our online survey software , or data from other sources. Learn more about Stats iQ now .

Step 8: The marketing research results

Your marketing research process culminates in the research results. These should provide all the information the stakeholders and decision-makers need to understand the project.

The results will include:

all your information
a description of your research process
the results
conclusions
recommended courses of action

They should also be presented in a form, language and graphics that are easy to understand, with a balance between completeness and conciseness, neither leaving important information out or allowing it to get so technical that it overwhelms the readers.

Traditionally, you would prepare two written reports:

a technical report , discussing the methods, underlying assumptions and the detailed findings of the research project
a summary report , that summarizes the research process and presents the findings and conclusions simply.

There are now more engaging ways to present your findings than the traditional PowerPoint presentations, graphs, and face-to-face reports:

Live, interactive dashboards for sharing the most important information, as well as tracking a project in real time.
Results-reports visualizations – tables or graphs with data visuals on a shareable slide deck
Online presentation technology, such as Prezi
Visual storytelling with infographics
A single-page executive summary with key insights
A single-page stat sheet with the top-line stats

You can also make these results shareable so that decision-makers have all the information at their fingertips.

Step 9 Turn your insights into action

Insights are one thing, but they’re worth very little unless they inform immediate, positive action. Here are a few examples of how you can do this:

Stop customers leaving – negative sentiment among VIP customers gets picked up; the customer service team contacts the customers, resolves their issues, and avoids churn .
Act on important employee concerns – you can set certain topics, such as safety, or diversity and inclusion to trigger an automated notification or Slack message to HR. They can rapidly act to rectify the issue.
Address product issues – maybe deliveries are late, maybe too many products are faulty. When product feedback gets picked up through Smart Conversations, messages can be triggered to the delivery or product teams to jump on the problems immediately.
Improve your marketing effectiveness - Understand how your marketing is being received by potential customers, so you can find ways to better meet their needs
Grow your brand - Understand exactly what consumers are looking for, so you can make sure that you’re meeting their expectations

Download now: 8 Innovations to Modernize Market Research

Scott Smith

Scott Smith, Ph.D. is a contributor to the Qualtrics blog.

December 20, 2023

Top market research analyst skills for 2024

November 7, 2023

Brand Experience

The 4 market research trends redefining insights in 2024

September 14, 2023

How BMG and Loop use data to make critical decisions

August 21, 2023

Designing for safety: Making user consent and trust an organizational asset

June 27, 2023

The fresh insights people: Scaling research at Woolworths Group

June 20, 2023

Bank less, delight more: How Bankwest built an engine room for customer obsession

June 16, 2023

How Qualtrics Helps Three Local Governments Drive Better Outcomes Through Data Insights

April 1, 2023

Academic Experience

How to write great survey questions (with examples)

Stay up to date with the latest xm thought leadership, tips and news., request demo.

Ready to learn more about Qualtrics?

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Chapter 6: Marketing Research

6.1 Steps in the Marketing Research Process

Learning Objectives

Describe the basic steps in the marketing research process and the purpose of each step.

The basic steps used to conduct marketing research are shown in figure 6.1 . Next, we discuss each step.

Step 1: Define the Problem (or Opportunity)

There’s a saying in marketing research that a problem half defined is a problem half solved. Defining the “problem” of the research sounds simple, doesn’t it? Suppose your “product” is tutoring other students in a subject you enjoy. You have been tutoring for a while, and people have begun to realize you’re very good at it. Then, suddenly, your business declines. Or it explodes, and you can’t cope with the number of students you’re being asked to help. If the business has exploded, should you try to expand your services? Perhaps you should subcontract with some other smart students. You would send them students to be tutored, and they would give you a cut of their pay for each student you referred to them.

Businesses are in the same boat. They take a look at symptoms and try to narrow down the potential causes. If you approach a marketing research company with either scenario—either too much or too little business—the firm will seek more information from you such as the following:

In what semester(s) did your tutoring revenues fall (or rise)?
In what subject areas did your tutoring revenues fall (or rise)?
In what sales channels did revenues fall (or rise): Were there fewer (or more) referrals from professors or other students? Did the social media post result in fewer (or more) referrals this month than in the past months?
Among what demographic groups did your revenues fall (or rise)— people with certain majors, or first-year, second-, third-, or fourth-year students, local or international students?

The next task for the researcher is to put the research objective into writing. The research objective is the goal(s) the research is supposed to accomplish. The marketing research objective for your tutoring business might read as follows:

To survey university professors who teach 100- and 200-level math courses to determine why the number of students referred for tutoring dropped in the second semester.

“To gather information from a sample representative of the U.S. population among those who are ‘very likely’ to purchase an automobile within the next 6 months, which assesses preferences (measured on a 1–5 scale ranging from ‘very likely to buy’ to ‘not likely at all to buy’) for the model diesel at three different price levels. Such data would serve as input into a forecasting model that would forecast unit sales, by geographic regions of the country, for each combination of the model’s different prices and fuel configurations.” (Burns & Bush, 2010) [1]

Now do you understand why defining the problem is complicated and half the battle? Many a marketing research effort has been doomed from the start because the problem was improperly defined. Coke’s ill-fated decision to change the formula of Coca-Cola in 1985 is a case in point: Pepsi had been creeping up on Coke in terms of market share over the years as well as running a successful promotional campaign called the “Pepsi Challenge,” in which consumers were encouraged to do a blind taste test to see if they agreed that Pepsi was better. Coke spent four years researching “the problem.” Indeed, people seemed to like the taste of Pepsi better in blind taste tests. Thus, the formula for Coke was changed. But the outcry among the public was so great that the new formula didn’t last long—a matter of months—before the old formula was reinstated. Some marketing experts believe Coke incorrectly defined the problem as “How can we beat Pepsi in taste tests?” instead of “How can we gain market share against Pepsi?” (Burns & Bush, 2010) [2]

Video 6.1 documents the Coca-Cola Company’s ill-fated launch of New Coke in 1985.

Video 6.1. New Coke Is It! 1985. Source: The 1985 launch of New Coke on Christian Budtz .

Video 6.2 shows how Pepsi tried to capitalize on the mistake.

Video 6.2. 1985 Pepsi Commercial “They Changed My Coke”. Source: 1985 Pepsi commercial: They changed my Coke on eyeh8cbs .

Step 2: Design the Research

The next step in the marketing research process is to do a research design. The research design outlines what data you are going to gather and from whom, how and when you will collect the data, and how you will analyze them once they’ve been obtained. Let’s look at the data you’re going to gather first.

There are two basic types of data you can gather. The first is primary data. Primary data is information you collect yourself, using hands-on tools such as interviews or surveys, specifically for the research project you’re conducting. Secondary data are data that have already been collected by someone else, or data you have already collected for another purpose. Collecting primary data is more time-consuming, work-intensive, and expensive than collecting secondary data. Consequently, you should always try to collect secondary data first to solve your research problem, if you can. A great deal of research on a wide variety of topics already exists. If this research contains the answer to your question, there is no need for you to replicate it. Why reinvent the wheel?

Sources of Secondary Data

Your company’s internal records are a source of secondary data. So are any data you collect as part of your regular marketing intelligence-gathering efforts. You can also purchase syndicated research. Syndicated research is primary data that marketing research firms collect on a regular basis and sell to other companies. J.D. Power & Associates is a provider of syndicated research. The company conducts independent, unbiased surveys of customer satisfaction, product quality, and buyer behaviour for various industries. The company is best known for its research in the automobile sector. One of the best-known sellers of syndicated research is the Nielsen Company, which produces the Nielsen ratings. The Nielsen ratings measure the size of television, radio, and newspaper audiences in various markets. You have probably read or heard about TV shows that get the highest (Nielsen) ratings (Arbitron does the same thing for radio ratings). Nielsen, along with its main competitor, Information Resources, Inc. (IRI), also sells businesses scanner-based research . Scanner-based research is information collected by scanners at checkout stands in stores. Each week, Nielsen and IRI collect information on the millions of purchases made at stores. The companies then compile the information and sell it to firms in various industries that subscribe to their services. The Nielsen Company has also recently teamed up with Facebook to collect marketing research information. Via Facebook, users will see surveys in some of the spaces in which they used to see online ads (Rappeport & Gelles, 2009). [3]

By contrast, MarketResearch.com is an example of a marketing research aggregator. A marketing research aggregator is a marketing research company that doesn’t conduct its own research and sell it; instead, it buys research reports from other marketing research companies and then sells the reports in their entirety or in pieces to other firms. Check out MarketResearch.com’s website ( figure 6.2 ). As you will see, there are a huge number of studies in every category imaginable that you can buy for relatively small amounts of money.

Your school library is a good place to gather free secondary data. It has searchable databases as well as handbooks, dictionaries, and books, some of which you can access online. Government agencies also collect and report information on demographics, economic and employment data, health information, and balance-of-trade statistics, among a lot of other information. Statistics Canada collects census data every ten years to gather information about who lives where. Basic demographic information about sex, age, race, and types of housing in which people live in each province, metropolitan area, and rural area is gathered so that population shifts can be tracked for various purposes.

The World Bank and the United Nations are two international organizations that collect a great deal of information. Their websites contain many free research studies and data related to global markets. Table 6.1 shows some examples of primary versus secondary data sources.

Gauging the Quality of Secondary Data

When you are gathering secondary information, it’s always good to be a little skeptical. Sometimes, studies are commissioned to produce the result a client wants to hear—or wants the public to hear. For example, throughout the twentieth century, numerous studies found that smoking was good for people’s health. The problem was the studies were commissioned by the tobacco industry. Web research can also pose certain hazards. There are many biased sites that try to fool people into thinking they are providing good data. Often, the data are favourable to the products they are trying to sell. Beware of product reviews as well. Unscrupulous sellers sometimes get online and create bogus ratings for products. See below for questions you can ask to help gauge the credibility of secondary information.

Gauging the Credibility of Secondary Data: Questions to Ask

Who gathered this information?
For what purpose?
What does the person or organization that gathered the information have to gain by doing so?
Was the information gathered and reported in a systematic manner?
Is the source of the information accepted as an authority by other experts in the field?
Does the article provide objective evidence to support the position presented?

Types of Research Designs

Now let’s look at the most common type of research design: exploratory.

An exploratory research design is useful when you are initially investigating a problem but you haven’t defined it well enough to do an in-depth study of it. Perhaps via your regular market intelligence, you have spotted what appears to be a new opportunity in the marketplace. You would then do exploratory research to investigate it further. Exploratory research is less structured than other types of research, and secondary data are often utilized.

One form of exploratory research is qualitative research. Qualitative research is any form of research that includes gathering data that are not quantitative, and it often involves exploring questions such as why as much as what or how much . Different forms, such as in-depth interviews and focus group interviews, are common in marketing research.

Interviews —engaging in detailed, one-on-one, question-and-answer sessions with potential buyers—is an exploratory research technique. However, unlike surveys, the people being interviewed aren’t asked a series of standard questions. Instead, the interviewer is armed with some general topics and asks questions that are open ended, meaning that they allow the interviewee to elaborate. “How did you feel about the product after you purchased it?” is an example of a question that might be asked. An interview also allows a researcher to ask logical follow-up questions such as “Can you tell me what you mean when you say you felt uncomfortable using the service?” or “Can you give me some examples?” to help dig further and shed additional light on the research problem. Interviews can be conducted in person or over the phone. The interviewer either takes notes or records the interview.

Focus groups and case studies are often utilized for exploratory research as well. A focus group is a group of potential buyers who are brought together to discuss a marketing research topic with one another. A moderator is used to focus the discussion, the sessions are recorded, and the main points of consensus are later summarized by the market researcher. Textbook publishers often gather groups of professors at educational conferences to participate in focus groups. However, focus groups can also be conducted on the telephone or online using meeting software like Zoom. The basic steps of conducting a focus group are outlined below.

The Basic Steps of Conducting a Focus Group

Establish the objectives of the focus group. What is its purpose?
Identify the people who will participate in the focus group. What makes them qualified to participate? How many of them will you need and what they will be paid?
Obtain contact information for the participants and send out invitations (e-mails are usually most efficient).
Develop a list of questions.
Choose a facilitator.
Choose a location in which to hold the focus group and the method by which it will be recorded.
Conduct the focus group. If the focus group is not conducted electronically, include name tags for the participants, pens and notepads, any materials the participants need to see, and refreshments. Record participants’ responses.
Summarize the notes from the focus group and write a report for management.

A case study looks at how another company solved the problem that’s being researched. Sometimes, multiple cases, or companies, are used in a study. Case studies nonetheless have a mixed reputation. Some researchers believe it’s hard to generalize, or apply, the results of a case study to other companies. Nonetheless, collecting information about companies that encountered the same problems your firm is facing can give you a certain amount of insight about what direction you should take. In fact, one way to begin a research project is to carefully study a successful product or service.

Two other types of qualitative data used for exploratory research are ethnographies and projective techniques. In ethnography , researchers interview, observe, and often videotape people while they work, live, shop, and play. The Walt Disney Company has recently begun using ethnographers to uncover the likes and dislikes of boys aged six to fourteen, a financially attractive market segment for Disney, but one in which the company has been losing market share. The ethnographers visit the homes of boys, observe the things they have in their rooms to get a sense of their hobbies, and accompany them and their mothers when they shop to see where they go, what the boys are interested in, and what they ultimately buy (Barnes, 2009). [4]

Projective techniques are used to reveal information research respondents might not reveal by being asked directly. Asking a person to complete sentences such as the following is one technique:

People who buy Gucci handbags __________. (Will he or she reply with “are cool,” “are affluent,” or “are pretentious,” for example?)

KFC’s grilled chicken is ______.

Or the person might be asked to finish a story that presents a certain scenario. Word associations are also used to discern people’s underlying attitudes toward goods and services. When using a word-association technique, a market researcher asks a person to say or write the first word that comes to his or her mind in response to another word. If the initial word is “fast food,” what word does the person associate it with or respond with? Is it “McDonald’s”? If many people reply that way, and you’re conducting research for Burger King, that could indicate Burger King has a problem. However, if the research is being conducted for Wendy’s, which recently began running an advertising campaign with the message that Wendy’s offerings are “better than fast food,” it could indicate that the campaign is working.

In some cases, your research might end with exploratory research. Perhaps you have discovered your organization lacks the resources needed to produce the product. In other cases, you might decide you need more in-depth, quantitative research such as descriptive research or causal research, which are discussed next. Most marketing research professionals suggest using both types of research, if it’s feasible. On the one hand, the qualitative type of research used in exploratory research is often considered too “lightweight.” On the other hand, relying solely on quantitative information often results in market research that lacks ideas.

Watch video 6.3 to see a funny spoof on the usefulness—or lack of usefulness—of focus groups.

Video 6.3. The Stone Wheel: What One Focus Group Said. Source: stone and stone wheel on smack1313 .

Step 3: Design the Data-Collection Forms

If the behaviour of buyers is being formally observed and a number of different researchers are conducting observations, the data obviously need to be recorded on a standardized data-collection form that’s either paper or electronic; otherwise, the data collected will not be comparable. The items on the form could include a shopper’s sex; his or her approximate age; whether the person seemed hurried, moderately hurried, or unhurried; and whether or not he or she read the label on products, used coupons, and so forth.

Questionnaire Design

Most questionnaires follow a similar format: They begin with an introduction describing what the study is for, followed by instructions for completing the questionnaire and, if necessary, returning it to the market researcher. The first few questions that appear on the questionnaire are usually basic, warm-up questions their respondent can readily answer, such as the respondent’s age, level of education, place of residence, and so forth. The warm-up questions are then followed by a logical progression of more detailed, in-depth questions that get to the heart of the question being researched. Lastly, the questionnaire wraps up with a statement that thanks the respondent for participating in the survey and providing information and explains when and how they will be paid for participating.

How the questions themselves are worded is extremely important. It’s human nature for respondents to want to provide the “correct” answers to the person administering the survey so as to seem agreeable. Therefore, there is always a hazard that people will try to tell you what you want to hear on a survey. Consequently, care needs to be taken that the survey questions are written in an unbiased, neutral way. In other words, they shouldn’t lead a person taking the questionnaire to answer a question one way or another by virtue of the way you have worded it. The following is an example of a leading question.

Do you agree that teachers should be paid more ?

The questions also need to be clear and unambiguous. Consider the following question:

Which brand of toothpaste do you use ?

The question sounds clear enough, but is it really? What if the respondent recently switched brands? What if she uses Crest at home, but while away from home or travelling she uses Colgate’s Wisp portable toothpaste-and-brush product? How will the respondent answer the question? Rewording the question as follows so it’s more specific will help make the question clearer:

Which brand of toothpaste have you used at home in the past six months? If you have used more than one brand, please list each of them (“Questionnaire Design,” n.d.). [5]

How many alcoholic beverages do you consume in a week ?

__0–5 alcoholic beverages
__5–10 alcoholic beverages
__10–15 alcoholic beverages

Many people don’t like to answer questions about their income levels. Asking them to specify income ranges rather than divulge their actual incomes can help.

Other research question “don’ts” include using jargon and acronyms that could confuse people. “How often do you Snap?” is an example. Also, don’t confuse people by asking two questions in the same question, something researchers refer to as a double-barrelled question . “Do you think parents should spend more time with their children and/or their teachers?” is an example of a double-barrelled question.

Open-ended questions , or questions that ask respondents to elaborate, can be included. However, they are harder to tabulate than closed-ended questions , or questions that limit a respondent’s answers. Multiple-choice, true/false and yes/no questions are examples of closed-ended questions.

Testing the Questionnaire

If the questions are bad, the information gathered will also be bad. One way to avoid this is to test the questionnaire before sending it out to find out if there are any problems with it. Is there enough space for people to elaborate on open-ended questions? Is the font readable? To test the questionnaire, marketing research professionals first administer it to a number of respondents face to face. This gives the respondents the chance to ask the researcher about questions or instructions that are unclear or don’t make sense to them. The researcher then administers the questionnaire to a small subset of respondents in the actual way the survey is going to be disseminated, whether it’s delivered via phone, in person, by mail, or online.

Step 4: Specify the Sample

Once you have created your questionnaire or other marketing study, how do you figure out who should participate in it? Obviously, you can’t survey or observe all potential buyers in the marketplace; instead, you must choose a sample. A sample is a subset of potential buyers that are representative of your entire target market or population being studied. Sometimes market researchers refer to the population as the universe to reflect the fact that it includes the entire target market, whether it consists of a million people, a hundred thousand, a few hundred, or a dozen. “All single people over the age of eighteen who purchased an air fryer in Canada during 2020” is an example of a population that has been defined.

Obviously, the population has to be defined correctly. Otherwise, you will be studying the wrong group of people. Not defining the population correctly can result in flawed research or a sampling error. A sampling error is any type of marketing research mistake that occurs because a sample was utilized. One criticism of Internet surveys is that the people who take these surveys don’t really represent the overall population. On average, Internet survey takers tend to be more educated and tech savvy. Consequently, if they solely constitute your population, even if you screen them for certain criteria, the data you collect could end up being skewed.

A nonprobability sample is any type of sample that’s not drawn in a systematic way, so the chances of each would-be participant being selected can’t be known. A convenience sample is one type of nonprobability sample. It is a sample a researcher draws because it’s readily available and convenient to do so. Surveying people on the street as they pass by is an example of a convenience sample. The question is, are these people representative of the target market?

Lastly, the size of the sample has an effect on sampling error. Larger samples generally produce more accurate results. The larger your sample is, the more data you will have, which will give you a more complete picture of what you’re studying. However, the more people surveyed or studied, the more costly the research becomes.

Statistics can be used to determine a sample’s optimal size. If you take a marketing research or statistics class, you will learn more about how to determine the optimal size.

Of course, if you hire a marketing research company, much of this work will be taken care of for you. Many marketing research companies maintain panels of prescreened people they draw upon for samples. In addition, the marketing research firm will be responsible for collecting the data or contracting with a company that specializes in data collection. Data collection is discussed next.

Step 5: Collect the Data

As we have explained, primary marketing research data can be gathered in a number of ways. Surveys, taking physical measurements, and observing people are just three of the ways we discussed. If you’re observing customers as part of gathering the data, keep in mind that if shoppers are aware of the fact, it can have an effect on their behaviour. For example, if a customer shopping for feminine hygiene products in a supermarket aisle realizes she is being watched, she could become embarrassed and leave the aisle, which would adversely affect your data. To get around problems such as these, some companies set up cameras or two-way mirrors to observe customers. Organizations also hire mystery shoppers to work around the problem. A mystery shopper is someone who is paid to shop at a firm’s establishment or one of its competitors to observe the level of service, cleanliness of the facility, and so forth and report his or her findings to the firm.

Watch the YouTube video 6.4 to get an idea of how mystery shopping works.

Video 6.4. Make Extra Money as a Mystery Shopper by KSSAyisha .

Survey data can be collected in many different ways and combinations of ways. The following are the basic methods used:

Face-to-face (can be computer aided)
Telephone (can be computer aided or completely automated)
Mail and hand delivery
E-mail and the Web

A face-to-face survey is, of course, administered by a person. The surveys are conducted in public places such as in shopping malls, on the street, or in people’s homes if they have agreed to it. In years past, it was common for researchers to knock on people’s doors to gather survey data. However, randomly collected door-to-door interviews are less common today, partly because people are afraid of crime and are reluctant to give information to strangers (McDaniel & Gates, 1998). [6]

Nonetheless, knocking on doors is still a legitimate way questionnaire data are collected. When Statistics Canada collects data on the nation’s population, it hand delivers questionnaires to rural households that do not have street-name and house-number addresses. And workers personally survey the homeless to collect information about their numbers. Face-to-face surveys are also commonly used in some countries to collect information from people who cannot read or lack phones and computers.

An advantage of face-to-face surveys is that they allow researchers to ask lengthier, more complex questions because the people being surveyed can see and read the questionnaires. The same is true when a computer is utilized. For example, the researcher might ask the respondent to look at a list of ten retail stores and rank the stores from best to worst. The same question wouldn’t work so well over the telephone because the person couldn’t see the list. The question would have to be rewritten. Another drawback with telephone surveys is that even though federal and state “do not call” laws generally don’t prohibit companies from gathering survey information over the phone, people often screen such calls using answering machines and caller ID.

Probably the biggest drawback of both surveys conducted face-to-face and administered over the phone by a person is that they are labour intensive and therefore costly. Mailing out questionnaires is costly, too, and the response rates can be rather low. Think about why that might be so: if you receive a questionnaire in the mail, it is easy to throw it in the trash; it’s harder to tell a market researcher who approaches you on the street that you don’t want to be interviewed.

By contrast, gathering survey data collected by a computer, either over the telephone or on the Internet, can be cost-effective and in some cases free. SurveyMonkey and Qualtrics are two websites that will allow you to create online questionnaires, e-mail them to up to one hundred people for free, and view the responses in real time as they come in. For larger surveys, you have to pay a subscription price of a few hundred dollars. But that still can be extremely cost-effective. See how easy it is to put together a survey in SurveyMonkey .

Like a face-to-face survey, an Internet survey can enable you to show buyers different visuals such as ads, pictures, and videos of products and their packaging. Web surveys are also fast, which is a major plus. While face-to-face and mailed surveys often take weeks to collect, you can conduct a web survey in a matter of days or even hours. And, of course, because the information is electronically gathered it can be automatically tabulated. You can also potentially reach a broader geographic group than you could if you had to personally interview people.

Another plus for web and computer surveys (and electronic phone surveys) is that there is less room for human error because the surveys are administered electronically. For instance, there’s no risk that the interviewer will ask a question wrong or use a tone of voice that could mislead the respondents. Respondents are also likely to feel more comfortable inputting the information into a computer if a question is sensitive than they would divulging the information to another person face to face or over the phone. Given all of these advantages, it’s not surprising that the Internet is quickly becoming the top way to collect primary data. However, like mail surveys, surveys sent to people over the Internet are easy to ignore.

Lastly, before the data collection process begins, the surveyors and observers need to be trained to look for the same things, ask questions the same way, and so forth. If they are using rankings or rating scales, they need to agree as to what constitutes a high ranking or a low ranking. The goal of training is to avoid a wide disparity between how different observers and interviewers record the data.

For example, if an observation form asks the observers to describe whether a shopper’s behaviour is hurried, moderately hurried, or unhurried, they should be given an idea of what defines each rating. Does it depend on how much time the person spends in the store or in the individual aisles? Is how fast they walk taken into account? In other words, the criteria and ratings need to be spelled out.

Step 6: Analyze the Data

Step 6 involves analyzing the data to ensure they’re as accurate as possible. If the research is collected by hand using a pen and pencil, it’s entered into a computer. Or respondents might have already entered the information directly into a computer. For example, when Toyota goes to an event such as a car show, the automaker’s marketing personnel ask would-be buyers to complete questionnaires directly on computers. Companies are also beginning to experiment with software that can be used to collect data using mobile phones.

Part of analyzing the data is to see if they seem sound. Does the way in which the research was conducted seem sound? Was the sample size large enough? Are the conclusions reached from it reasonable?

Step 7: Write the Research Report and Present Its Findings

If you end up becoming a marketing professional and conducting a research study after you graduate, hopefully you will do a great job putting the study together. You will have defined the problem correctly, chosen the right sample, collected the data accurately, analyzed them, and your findings will be sound. At that point, you will be required to write the research report and perhaps present it to an audience of decision makers. You will do so via a written report and, in some cases, a slide or PowerPoint presentation based on your written report.

The six basic elements of a research report are as follows.

Title Page . The title page explains what the report is about, when it was conducted and by whom, and who requested it.
Table of Contents . The table of contents outlines the major parts of the report as well as any graphs and charts and their page numbers.
Executive Summary . The executive summary summarizes all the details in the report in a quick way. Many people who receive the report—both executives and nonexecutives—won’t have time to read the entire report. Instead, they will rely on the executive summary to quickly get an idea of the study’s results and what to do about those results.
Methodology and Limitations . The methodology section of the report explains the technical details of how the research was designed and conducted. The section explains, for example, how the data were collected and by whom, the size of the sample, how it was chosen, and whom or what it consisted of (e.g., the number of women versus men or children versus adults). It also includes information about the statistical techniques used to analyze the data. Every study has errors—sampling errors, interviewer errors, and so forth. The methodology section should explain these details so decision makers can consider their overall impact. The margin of error is the overall tendency of the study to be off kilter—that is, how far it could have gone wrong in either direction. Remember how newscasters present the presidential polls before an election? They always say, “This candidate is ahead 48 to 44 percent, plus or minus 2 percent.” That “plus or minus” is the margin of error. The larger the margin of error is, the less likely the results of the study are accurate. The margin of error needs to be included in the methodology section.
Findings . The findings section is a longer, fleshed-out version of the executive summary that goes into more detail about the statistics uncovered by the research that bolster the study’s findings. If you have related research or secondary data on hand that back up the findings, they can be included to help show the study did what it was designed to do.
Recommendations . The recommendations section should outline the course of action you think should be taken based on the findings of the research and the purpose of the project. For example, if you conducted a global market research study to identify new locations for stores, make a recommendation for the locations (Mersdorf, 2009). [7]

As you write the research report, keep your audience in mind. Don’t use technical jargon decision makers and other people reading the report won’t understand. If technical terms must be used, explain them. Also, proofread the document to identify any grammatical errors and typos and ask a couple of other people to proofread it to catch any mistakes you might have missed. If your research report is riddled with errors, its credibility will be undermined, even if the findings and recommendations you make are extremely accurate.

Key Takeaways

Step 1 in the marketing research process is to define the problem. Businesses look at what they believe are symptoms and drill down to the potential causes so as to precisely define the problem. The next task for the researcher is to put into writing the research objective, or goal, the research is supposed to accomplish.
Step 2 in the process is to design the research. The research design is the “plan of attack.” It outlines what data you are going to gather, from whom, how, and when, and how you’re going to analyze it once it has been obtained.
Step 3 is to design the data-collection forms, which need to be standardized so the information gathered on each is comparable. Surveys are a popular way to gather data because they can be quickly and easily administered to large numbers of people. However, to produce the best results, survey questionnaires need to be carefully designed and pretested before they are used.
Step 4 is drawing the sample, or a subset of potential buyers who are representative of your entire target market. If the sample is not correctly selected, the research will be flawed.
Step 5 is to actually collect the data, whether they’re collected by a person face to face, over the phone, or with the help of computers or the Internet. The data-collection process is often different in foreign countries.
Step 6 is to analyze the data collected for any obvious errors, tabulate the data, and then draw conclusions from them based on the results. The last step in the process,
Step 7 is writing the research report and presenting the findings to decision makers.

Review and Reflect

Explain why it’s important to carefully define the problem or opportunity a marketing research study is designed to investigate.
Describe the different types of problems that can occur when marketing research professionals develop questions for surveys.
What sections should be included in a marketing research report? What is each section designed to do?

Media Attributions

Steps in the Marketing Research Process © University of Minnesota Libraries Publishing is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license
Burns, A., & Bush, R. (2010). Marketing research (6th ed.). Prentice Hall. ↵
Rappeport, A., & Gelles, D. (2009, September 23). Facebook to form alliance with Nielsen. Financial Times, 16 . ↵
Barnes, B. (2009, April 15). Disney expert uses science to draw boy viewers . New York Times . Accessed December 14, 2009. ↵
Questionnaire design . (n.d.). QuickMBA. Accessed December 14, 2009. ↵
McDaniel, C. D., & Gates, R. H. (1998). Marketing research essentials (2nd ed.). South-Western College Publishing. ↵
Mersdorf, S. (2009, August 24). How to organize your next survey report . Cvent. Accessed July 31, 2023). ↵

the goal(s) the research is supposed to accomplish

what data you are going to gather and from whom, how and when you will collect the data, and how you will analyze them once they’ve been obtained

information you collect yourself, using hands-on tools such as interviews or surveys, specifically for the research project you’re conducting

data that have already been collected by someone else, or data you have already collected for another purpose

primary data that marketing research firms collect on a regular basis and sell to other companies

information collected by scanners at checkout stands in stores

a marketing research company that buys research reports from other marketing research companies and then sells the reports in their entirety or in pieces to other firms

when you are initially investigating a problem but you haven’t defined it well enough to do an in-depth study of it

any form of research that includes gathering data that are not quantitative, and it often involves exploring questions such as why as much as what or how much

engaging in detailed, one-on-one, question-and-answer sessions with potential buyers

a group of potential buyers who are brought together to discuss a marketing research topic with one another

analyzes how another company solved the problem that’s being researched

researchers interview, observe, and often videotape people while they work, live, shop, and play

used to reveal information research respondents might not reveal by being asked directly

asking two questions in the same question

questions that ask respondents to elaborate

questions that limit a respondent’s answers

a subset of potential buyers that are representative of your entire target market

from which you derive your target market

any type of marketing research mistake that occurs because a sample was utilized

each would-be participant has a known and equal chance of being selected

any type of sample that’s not drawn in a systematic way

a sample a researcher draws because it’s readily available and convenient to do so

someone who is paid to shop at a firm’s establishment or one of its competitors to observe the level of service, cleanliness of the facility, and so forth and report his or her findings to the firm

the overall tendency of the study to be off kilter

Share This Book

Digital Marketing Agency Orange County CA | Your Marketing People

What Is the First Step in the Marketing Research Process?

Many people think of marketing research as a critical step in launching a new business or product.

However, marketing research can be just as helpful once a business is already established. For example, marketing research can help businesses successfully adjust their pricing, update their branding , expand into a new audience segment, or increase their market share.

The marketing research process can range in complexity and scope, but successful research always follows the same order of operations, starting with the first step.

What is the first step in the marketing research process?

The first step in the marketing research process is defining the problem . That may sound like a glass-half-empty pessimist’s approach, but it’s really about finding the solution.

Before you start any kind of research — whether it’s marketing-related or not — you must know the problem you are trying to solve. Once you define your problem, you can ask the right questions and get the answers you need to take action.

If you’re not sure what the problem is, start with your goal. Your goal should be SMART (Specific Measurable Attainable Relevant Timely). Then, you can work backwards to define the problem.

What is a marketing problem?

The marketing problem is one the business needs to solve in order to reach their goal. Having said that, the problem should be treated as a research problem, not a business problem.

For example, you want to ask, “How do different price points affect audience perception or interest in our product?” as opposed to “What steps should we take to ensure our price increase is a success?” The first question focuses on the research — finding the answers to specific questions, while the second question focuses on the action items a business must take after the research is completed.

Here are a few more examples of marketing problems vs. business problems.

Example #1: Goal is to expand into a new target audience

Management problem: “How do we expand our target audience to include demographic X?”
Research problem : “What unique needs does demographic X have? What is their perception of how other products in the space are currently serving their needs? How do different types of messaging resonate with them?”

Example #2: Goal is to improve the current marketing campaigns for a particular product

Management problem: “How do we create more effective marketing campaigns for this product?”
Research problem: “How do our different user personas rate the effectiveness of the current marketing campaigns for this product? Do they respond more or less positively to alternate messaging? What are their feelings on our competitors’ campaigns?”

What are the next steps in the marketing research process?

By clearly defining the problem, you can stay focused throughout the rest of the marketing research process. Using your problem as your guide, you can:

Determine the tools and methodology you’ll use to conduct your marketing research
Define the specific questions you want answered
Seek out the right people to help you answer those questions, e.g. individuals from your target audience, market experts, etc.
Gather your information into a digestible format so you can present and analyze it with the broader team

Marketing research is an essential first step in the success of any new venture, whether it’s as broad as creating an ecommerce store or as focused as expanding into a new market. Defining your problem is crucial to keeping your research streamlined and effective. For help making your research a success, contact Your Marketing People . We have years of experience conducting marketing research that boosts revenue and other essential KPIs for our clients.

Previous Post How Does Google Display Ads Grow Marketing Results for Advertisers?

Next post google ads: different ways to track conversions.

Author Alisha Rechberg

Comments are closed.

200 Spectrum Center Dr, Suite 300-B Irvine, CA 92618 Mon – Fri: 8am – 6pm Sat: 10am – 2pm

T: 949.484.9104 E: [email protected]

We are a full-funnel digital marketing agency in California that offers inbound marketing , SEO , and Pay-Per-Click . Proudly located in Irvine, CA, we serve medium-sized businesses throughout North America.

Paid Search (PPC)
Organic Search (SEO)
Paid Social
Email Marketing
Video Production

Quick Links

Mission Statement

Marketing Research, 11th Edition by Carl McDaniel Jr., Roger Gates

Get full access to Marketing Research, 11th Edition and 60K+ other titles, with a free 10-day trial of O'Reilly.

There are also live events, courses curated by job role, and more.

CHAPTER 3 Problem Definition, Exploratory Research, and the Research Process

Photo illustration of a group of men and women executives in a discussion.

Conducting marketing research involves a series of logical steps, beginning with problem definition and research objectives. What are the steps in the marketing research process? How is the research process initiated? These are the issues we will address in this chapter.

Critical Importance of Correctly Defining the Problem

Correctly defining the problem is the crucial first step in the marketing research process. If the research problem is defined incorrectly, the research objectives will also be wrong, and the entire marketing research process will be a waste of time and money. A large consumer packaged-goods company wanted to conduct a study among a brand’s heavy users in order to understand the brand’s equity. More specifically, it wanted to expand that equity into new products. The brand had very low penetration, so the company needed new products to meet the upcoming fiscal year’s volume goal of double-digit growth. Notice the absence of tying research learning—understanding the brand’s ...

Get Marketing Research, 11th Edition now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Don’t leave empty-handed

Get Mark Richards’s Software Architecture Patterns ebook to better understand how to design components—and how they should interact.

It’s yours, free.

Check it out now on O’Reilly

Dive in for free with a 10-day trial of the O’Reilly learning platform—then explore all the other resources our members count on to build skills and solve problems every day.

BUS101: Introduction to Business

Marketing research process.

To accurately arrive at a target market, businesses must research who their typical customer is. Read each section to learn about conducting marketing research. Try to summarize these lessons and write a brief reflection of how you would research if you were the owner of an upscale retail clothing store in a major metropolitan city with several competitors.

Learning Objectives

Outline objectives and problems as part of the marketing research process
Describe the formulation of research design within the context of the marketing research process
Recognize the basis for developing a specific approach to the objective or problem to be solved through the marketing research process
Construct the rationale of fieldwork or data collection from a marketing research process perspective
Summarize the characteristics of data preparation and methodology of data analysis
Identify the characteristics of preparing, presenting, and documenting the results of marketing research
The marketing research process involves six steps: 1: problem definition, 2: develop an approach to the problem, 3: research design formulation, 4: data collection, 5: data preparation and analysis, and 6: report preparation and presentation.
The first step in any marketing research study is to define the problem while taking into account the purpose of the study, the relevant background information, what information is needed, and how it will be used in decision making. This stage involves discussion with the decision-makers, interviews with industry experts, analysis of secondary data, and, perhaps, some qualitative research, such as focus groups.
Marketers can employ three types of objectives their research: exploratory research, descriptive research, and causal research.
The marketing process details the procedures to obtain this information. It aims to design a study that will test the hypotheses of interest, determine possible answers to the research questions, and provide the information needed for decision making.
Researchers need to choose the type of data they want to obtain from the respondents, such as via a survey or experiment and design a questionnaire and sampling plan to choose the most appropriate respondents for their study.
Research design involves secondary data analysis; qualitative research; quantitative data methods (survey, observation, and experimentation); information needed; measurement and scaling procedures; questionnaire design; sampling process and sample size; and a plan of data analysis.
Data collection involves a field force or staff that operates in the field, as in the case of personal interviewing, from an office by telephone, or through the mail (traditional mail and mail panel surveys with pre-recruited households).
Proper selection, training, supervision, and evaluation of the field force helps minimize data-collection errors. Data is carefully edited, coded, transcribed, and verified so it can be properly analyzed during this phase of the research process. Verification ensures that the data from the original questionnaires have been accurately transcribed, while data analysis gives meaning to the data that have been collected.
Bias must be avoided when interpreting data because only the results (not personal opinion) should be communicated.
The entire project should be documented in a written report that addresses the specific research questions identified; describes the approach, research design, data collection, and data analysis procedures adopted; and presents the results and the major findings.
The findings should be presented in a comprehensible format so they can be readily used in the decision-making process. An oral presentation to management, using tables, charts, and graphs, will enhance clarity and impact.
Business Intelligence – Information that pertains to the history, current status, or future projections of a business organization.
Data – Values of qualitative or quantitative variables belonging to a set of items; Data are typically the results of measurements and can be visualized using graphs or images
Data Mining – A technique for searching large-scale databases for patterns; used mainly to find previously unknown correlations between variables that may be commercially useful.
Ethnographic research – Information regarding cultural phenomena.
Executive Summary – A short section or document that summarizes a longer report or proposal so readers can quickly learn about a larger work without having to read it in its entirety.
Mall Intercept – A survey where respondents are intercepted in shopping malls to administer a survey on the spot or invite them to a research facility to conduct the interview.
Market Research – The systematic collection and evaluation of data regarding customers' preferences for actual and potential products and services.
Marketing Research – A research process that links the consumers, customers, and public to the marketer through information. This information is used to identify and define marketing opportunities and problems; generate, refine, and evaluate marketing actions; monitor marketing performance; and improve understanding of marketing as a process.
Objective – Not influenced by irrational emotions or prejudices.
Qualitative Research – A method of inquiry employed in many different academic disciplines, traditionally in the social sciences but also in market research and further contexts.
Scientific Method – A body of techniques for acquiring new knowledge or correcting and integrating previous knowledge. To be termed scientific, a method of inquiry must be based on empirical and measurable evidence subject to specific principles of reasoning.
Secondary Data – Information collected by someone other than the user of the data.
Secondary Research – A research process that Involves the summary, collation, and synthesis of existing research rather than primary research, where data is collected from subjects or experiments.
Survey Research – A research process that obtains information from a predetermined set of questions given to a sample, used to assess thoughts, opinions, and feelings.
Systematic – Carried out using a planned, ordered procedure.

Marketing Research Is Systematic and Objective:

Systematic planning is required at all stages of the marketing research process. The procedures followed at each stage are methodologically sound, well documented, and, as much as possible, planned in advance. Marketing research uses the scientific method in that data are collected and analyzed to test prior notions or hypotheses.
Marketing research aims to provide accurate information that reflects a true state of affairs and, thus, should be conducted impartially. While research is always influenced by the researcher's research philosophy, it should be free from the personal or political biases of the researcher or the management.

Overview of the Marketing Research Process:

Step 1: problem definition, step 2: development of an approach to the problem, step 3: research design formulation.

Step 4: Field Work or Data Collection

Step 5: Data Preparation and Analysis

Step 6: report preparation and presentation.

Define the problem and research objectives. The first step in any marketing research study is to define the problem while taking into account the purpose of the study, the relevant background information, what information is needed, and how it will be used in decision making. This stage involves discussion with the decision-makers, interviews with industry experts, analysis of secondary data, and, perhaps, some qualitative research, such as focus groups. There are three types of objectives that can be deployed in marketing research:

The first stage of the marketing research process involves defining the problem.

1. Exploratory research

Used to better define a problem or scout opportunities.
In-depth interviews and discussion groups are commonly used.

2. Descriptive research

Used to assess a situation in the marketplace (that is, the potential for a specific product or consumer attitudes).
Methods include personal interviews and surveys.

3. Causal research

Used for testing cause and effect relationships.
Typically through estimation.

Step two includes formulating an objective or theoretical framework, analytical models, research questions, hypotheses, and identifying characteristics or factors that can influence the research design. This process is guided by discussions with management and industry experts, case studies and simulations, analysis of secondary data, qualitative research, and pragmatic considerations.

Planning involves the creation and maintenance of a plan.

A research design is a framework or blueprint for conducting the marketing research project. It details the procedures necessary for obtaining the required information, and its purpose is to design a study that will test the hypotheses of interest, determine possible answers to the research questions, and provide the information needed for decision making. Decisions are also made regarding what data should be obtained from the respondents (such as by conducting a survey or an experiment). A questionnaire and sampling plan also are designed in order to select the most appropriate respondents for the study. The following steps are involved in formulating a research design:

Secondary data analysis (based on secondary research)
Qualitative research
Methods of collecting quantitative data (survey, observation, and experimentation)
Definition of the information needed
Measurement and scaling procedures
Questionnaire design
Sampling process and sample size
Plan of data analysis

Secondary data analysis is one of the steps involved in formulating a Research Design

Developing the research plan for collecting information:

The research plan outlines sources of existing data and spells out the specific research approaches, contact methods, sampling plans, and instruments that researchers will use to gather data. This plan includes a written proposal that outlines the management problem, research objectives, information required, how the results will help management decisions, and the budget allocated for the research.

Step 4: Fieldwork or Data Collection

Fieldwork, or data collection, involves a field force or staff that operates either in the field, as in the case of personal interviewing (focus group, in-home, mall intercept, or computer-assisted personal interviewing), from an office by telephone (telephone or computer-assisted telephone interviewing/CATI), or through the mail (traditional mail and mail panel surveys with pre-recruited households). Proper selection, training, supervision, and evaluation of the field force helps minimize data-collection errors. In marketing research, an example of data collection is when a consumer goods company hires a market research company to conduct in-home ethnographies and in-store shop-alongs in an effort to collect primary research data.

Soldiers and family members participated in USAG-RC-sponsored focus group s

Marketing Research is Systematic and Objective

Systematic planning is required at all stages of the marketing research process, especially in the data collection step. The procedures followed at each stage are methodologically sound, well documented, and, as much as possible, planned in advance. Marketing research uses the scientific method in that data are collected and analyzed to test prior notions or hypotheses.
Marketing research aims to provide accurate information that reflects a true state of affairs and thus, should be conducted impartially. While research is always influenced by the researcher's philosophy, it should be free from the personal or political biases of the researcher or the management. This is especially important in the data collection phase. The data collected will be analyzed and used to make marketing decisions. Hence, it is vital that the data collection process be free of as much bias as possible.

Primary Versus Secondary Research

There are many sources of information a marketer can use when collecting data. The Nielson Ratings is an audience measurement system that provides data on audience size and the composition of television markets in the United States. The Gallup Polls conduct public opinion polls with its results published daily in the form of data-driven news. The U.S Census Bureau, directed by the U.S. Government is the principal agency that is responsible for producing data about American people and the economy. Population, housing, and demographic characteristics are gathered to help plan and define transportation systems, police and fire precinct, election districts, and schools.

Analysis of data is a process of inspecting, cleaning, transforming, and modeling data with the goal of highlighting useful information, suggesting conclusions, and supporting decision making. Data analysis has multiple facets and approaches, encompassing diverse techniques under a variety of names in different business, science, and social science domains. Data mining is a particular data analysis technique that focuses on modeling and knowledge discovery for predictive rather than purely descriptive purposes. Marketers use databases to extract applicable information that identifies customer patterns, characteristics, and behaviors.

Notes on data analysis process and testing parameters .

Business intelligence covers data analysis that relies heavily on aggregation and focusing on business information. In statistical applications, some people divide data analysis into descriptive statistics, exploratory data analysis (EDA), and confirmatory data analysis (CDA). EDA focuses on discovering new features in the data and CDA focuses on confirming or falsifying existing hypotheses. Predictive analytics focuses on the application of statistical or structural models for predictive forecasting or classification. Text analytics applies statistical, linguistic, and structural techniques to extract and classify information from textual sources, a species of unstructured data. All are varieties of data analysis.

During this phase of the research process, data is carefully edited, coded, transcribed, and verified in order for it to be properly analyzed. Statistical market research tools are used. The validity of the results is also assessed to confirm how well the data measures what it is supposed to measure. Oftentimes, the research team will arrange a debriefing session with the client to review highlights from the data and brainstorm potential ideas on how the findings can be implemented. This typically happens when a client hires a market research company and they want to remain thoroughly involved in the research process.

Researchers can set up a debriefing meeting to review the analysis

Types of data analysis outputs: heat map, bar plots, scatter plots .

Helpful tips to keep in mind during data analysis:

Communicate the results.
Try to avoid bias when interpreting data.
Just because results fail to confirm original hypotheses, does not mean the research results are useless.

During the Report Preparation and Presentation step, the entire project should be documented in a written report that addresses the specific research questions identified; describes the approach, the research design, data collection, and data analysis procedures adopted; and presents the results and the major findings. This permanent document is also helpful because it can be easily referenced by others who may not have been part of the research.

The findings should be presented in a comprehensible format so that they can be readily used in the decision-making process. In addition, an oral presentation should be made to management using tables, figures, and graphs to enhance clarity and impact.

Someone giving a presentation using visual elements

A successful presentation will include but is not limited to the following elements:

Final conclusions (based on the insights gathered from data collected) that effectively meet the initial objectives of the research
Recommendations about how to apply the research
Charts, graphs, and visual elements that help showcase important facts and make the presentation easily digestible and memorable

A formal research report presentation typically includes the following:

Table of Contents
Executive Summary
Research Objectives
Research Methodology
Highlights of Fieldwork Data Collected
Appendix (including Respondent Screening Instrument and Questionnaire)
Findings/Insights
Recommendations/Implications and Action Plan

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

104 Reading: The Marketing Research Process

A standard approach to research inquiries.

Marketing research is a useful and necessary tool for helping marketers and an organization’s executive leadership make wise decisions. Carrying out marketing research can involve highly specialized skills that go deeper than the information outlined in this module. However, it is important for any marketer to be familiar with the basic procedures and techniques of marketing research.

It is very likely that at some point a marketing professional will need to supervise an internal marketing research activity or to work with an outside marketing research firm to conduct a research project. Managers who understand the research function can do a better job of framing the problem and critically appraising the proposals made by research specialists. They are also in a better position to evaluate their findings and recommendations.

Periodically marketers themselves need to find solutions to marketing problems without the assistance of marketing research specialists inside or outside the company. If you are familiar with the basic procedures of marketing research, you can supervise and even conduct a reasonably satisfactory search for the information needed.

Steps of the Marketing Research Process: 1. Identify the problem (this includes the problem to solve, project objectives, and research questions). 2. Develop the research plan (this includes information needed, research & sales methods). 3. Conduct research (this includes secondary data review, primary data collection, suitable methods and techniques. 4. Analyze and report findings (this includes data formatting and analysis, interpretation of results, reports and recommendations. 5. Take action (this includes thought and planning, evaluation of options, course adjustment and execution.

Step 1: Identify the Problem

The first step for any marketing research activity is to clearly identify and define the problem you are trying to solve. You start by stating the marketing or business problem you need to address and for which you need additional information to figure out a solution. Next, articulate the objectives for the research: what do you want to understand by the time the research project is completed? What specific information, guidance, or recommendations need to come out of the research in order to make it a worthwhile investment of the organization’s time and money?

It’s important to share the problem definition and research objectives with other team members to get their input and further refine your understanding of the problem and what is needed to solve it. At times, the problem you really need to solve is not the same problem that appears on the surface. Collaborating with other stakeholders helps refine your understanding of the problem, focus your thinking, and prioritize what you hope to learn from the research. Prioritizing your objectives is particularly helpful if you don’t have the time or resources to investigate everything you want.

To flesh out your understanding of the problem, it’s useful to begin brainstorming actual research questions you want to explore. What are the questions you need to answer in order to get to the research outcomes? What is the missing information that marketing research will help you find? The goal at this stage is to generate a set of preliminary, big-picture questions that will frame your research inquiry. You will revisit these research questions later in the process, but when you’re getting started, this exercise helps clarify the scope of the project, whom you need to talk to, what information may already be available, and where to look for the information you don’t yet have.

Applied Example: Marketing Research for Bookends

To illustrate the marketing research process, let’s return to Uncle Dan and his ailing bookstore, Bookends. You need a lot of information if you’re going to help Dan turn things around, so marketing research is a good idea. You begin by identifying the problem and then work to set down your research objectives and initial research questions:

Identifying Problems, Objectives, and Questions

Core business problem Dan needs to solve

How to get more people to spend more money at Bookends.

Research Objectives

Identify promising target audiences for Bookends
Identify strategies for rapidly increasing revenue from these target audiences

Initial research questions

Who are Bookends’ current customers?
How much money do they spend?
Why do they come to Bookends?
What do they wish Bookends offered?
Who isn’t coming to Bookends, and why?

Step 2: Develop a Research Plan

Once you have a problem definition, research objectives, and a preliminary set of research questions, the next step is to develop a research plan. Essential to this plan is identifying precisely what information you need to answer your questions and achieve your objectives. Do you need to understand customer opinions about something? Are you looking for a clearer picture of customer needs and related behaviors? Do you need sales, spending, or revenue data? Do you need information about competitors’ products or insight about what will make prospective customers notice you? When do you need the information, and what’s the time frame for getting it? What budget and resources are available?

Once you have clarified what kind of information you need and the timing and budget for your project, you can develop the research design. This details how you plan to collect and analyze the information you’re after. Some types of information are readily available through secondary research and secondary data sources. Secondary research analyzes information that has already been collected for another purpose by a third party, such as a government agency, an industry association, or another company. Other types of information need to from talking directly to customers about your research questions. This is known as primary research , which collects primary data captured expressly for your research inquiry. Marketing research projects may include secondary research, primary research, or both.

Depending on your objectives and budget, sometimes a small-scale project will be enough to get the insight and direction you need. At other times, in order to reach the level of certainty or detail required, you may need larger-scale research involving participation from hundreds or even thousands of individual consumers. The research plan lays out the information your project will capture—both primary and secondary data—and describes what you will do with it to get the answers you need. (Note: You’ll learn more about data collection methods and when to use them later in this module.)

Your data collection plan goes hand in hand with your analysis plan. Different types of analysis yield different types of results. The analysis plan should match the type of data you are collecting, as well as the outcomes your project is seeking and the resources at your disposal. Simpler research designs tend to require simpler analysis techniques. More complex research designs can yield powerful results, such as understanding causality and trade-offs in customer perceptions. However, these more sophisticated designs can require more time and money to execute effectively, both in terms of data collection and analytical expertise.

The research plan also specifies who will conduct the research activities, including data collection, analysis, interpretation, and reporting on results. At times a singlehanded marketing manager or research specialist runs the entire research project. At other times, a company may contract with a marketing research analyst or consulting firm to conduct the research. In this situation, the marketing manager provides supervisory oversight to ensure the research delivers on expectations.

Finally, the research plan indicates who will interpret the research findings and how the findings will be reported. This part of the research plan should consider the internal audience(s) for the research and what reporting format will be most helpful. Often, senior executives are primary stakeholders, and they’re anxious for marketing research to inform and validate their choices. When this is the case, getting their buy-in on the research plan is recommended to make sure that they are comfortable with the approach and receptive to the potential findings.

Applied Example: A Bookends Research Plan

You talk over the results of your problem identification work with Dan. He thinks you’re on the right track and wants to know what’s next. You explain that the next step is to put together a detailed plan for getting answers to the research questions.

Dan is enthusiastic, but he’s also short on money. You realize that such a financial constraint will limit what’s possible, but with Dan’s help, you can do something worthwhile. Below is the research plan you sketch out:

Identifying Data Types, Timing, Budget, Data Collection Methods, Analysis, and Interpretation

Types of data needed

Demographics and attitudes of current Bookends customers
Current customers’ spending patterns
Metro area demographics (to determine types of people who aren’t coming to the store)

Timing and budget

Complete project within 1 month
No out-of-pocket spending

Data collection methods

Current customer survey using a free online survey tool
Store sales data mapped to customer survey results
Statistics Canada data on metro-area demographics
8 to 10 intercept (“man on the street”) interviews with non-customers

Analysis plan

Use Excel or Google Sheets to tabulate data
Marina (statistician cousin) to assist in identifying data patterns that could become market segments

Interpretation and Reporting

You and Dan will work together to comb through the data and see what insights it produces. You’ll use PowerPoint to create a report that lays out significant results, key findings, and recommendations.

Step 3: Conduct the Research

Conducting research can be a fun and exciting part of the marketing research process. After struggling with the gaps in your knowledge of market dynamics—which led you to embark on a marketing research project in the first place—now things are about to change. Conducting research begins to generate information that helps answer your urgent marketing questions. As previously mentioned, there are two types of research: primary and secondary. Primary research is research that you conduct yourself (i.e., you go out into the field and find data and complete experiments). Secondary research is research conducted or synthesized by someone else (i.e., someone else has gone out into the field or someone else has compiled multiple sources of research). Though it may seem counterintuitive based on their names, typically data collection begins by reviewing any existing secondary research. After getting everything you can from secondary research, it’s time to shift attention to primary research. After all, it’s much easier (and smarter!) to review existing research before potentially redoing experiments or recapturing known information.

Secondary Research

With secondary research, it’s important to narrow your scope to existing research and data that provide some information or insight about the problem. Prior research projects, internal data analyses, industry reports, customer satisfaction survey results, and other information sources may be worthwhile to review. Even though these resources may not answer your research questions fully, they may further illuminate the problem you are trying to solve. Secondary research and data sources are nearly always cheaper than capturing new information on your own. Your marketing research project should benefit from prior work wherever possible.

Primary Research

You may not always complete primary research, but it is often part of research plans. Primary research involves asking questions and then listening to and/or observing the behavior of the target audience you are studying. In order to generate reliable, accurate results, it is important to use proper scientific methods for primary research data collection and analysis. This includes identifying the right individuals and number of people to talk to, using carefully worded surveys or interview scripts, and capturing data accurately. Without proper techniques, you may inadvertently get bad data or discover bias in the responses that distorts the results and points you in the wrong direction. The module on Marketing Research Techniques discusses these issues in further detail since the procedures for getting reliable data vary by research method.

Applied Example: Getting the Data on Bookends

Dan is on board with the research plan, and he’s excited to dig into the project. You start with secondary data, getting a dump of Dan’s sales data from the past two years, along with related information: customer name, postal code, frequency of purchase, gender, date of purchase, and discounts/promotions (if any).

You visit the U.S. Census Bureau website for Arkansas to download demographic data about a metro area. The data show all census subdivisions in the area, along with population size, gender breakdown, age ranges, income, and education levels.

The next part of the project is customer survey data. You work with Dan to put together a short survey about customer attitudes toward Bookends, how often and why they come, where else they spend money on books and entertainment, and why they go other places besides Bookends. Dan comes up with the great idea of offering a 5 percent discount coupon to anyone who completes the survey. Although it eats into his profits, this scheme gets more people to complete the survey and buy books, so it’s worth it.

Man with a full beard wearing a red hat pushes a stroller with a baby inside. A woman is checking on the child and talking on her cell phone. Two young people are walking in the background.

For a couple of days, you and Dan take turns doing “man on the street” interviews (you interview the guy in the red hat, for instance). You find people who say they’ve never been to Bookends and ask them a few questions about why they haven’t visited the store, where else they buy books and other entertainment, and what might get them interested in visiting Bookends sometime. This is a lot of work, but for a zero-budget project, it’s coming together pretty well.

Step 4: Analyze and Report Findings

Analyzing the data obtained in a market survey involves transforming the primary and/or secondary data into useful information and insights that answer the research questions. This information is condensed into a format to be used by managers—usually a presentation or detailed report.

Analysis starts with formatting, cleaning, and editing the data to make sure that it’s suitable for whatever analytical techniques are being used. Next, data is tabulated to show what’s happening: what do customers actually think? What’s happening with purchasing or other behaviors? How do revenue figures actually add up? Whatever the research questions, the analysis takes source data and applies analytical techniques to provide a clearer picture of what’s going on. This process may involve simple or sophisticated techniques, depending on the research outcomes required. Common analytical techniques include regression analysis to determine correlations between factors; conjoint analysis to determine trade-offs and priorities; predictive modeling to anticipate patterns and causality, and analysis of unstructured data such as Internet search terms or social media posts to provide context and meaning around what people say and do.

Good analysis is important because the interpretation of research data—the “so what?” factor—depends on it. The analysis combs through data to paint a picture of what’s going on. The interpretation goes further to explain what the research data means and make recommendations about what managers need to know and do based on the research results. For example, what is the shortlist of key findings and takeaways that managers should remember from the research? What are the market segments you’ve identified, and which ones should you target? What are the primary reasons your customers choose your competitor’s product over yours, and what does this mean for future improvements to your product?

Individuals with a good working knowledge of the business should be involved in interpreting the data because they are in the best position to identify significant insights and make recommendations from the research findings. Marketing research reports incorporate both analysis and interpretation of data to address the project objectives.

The final report for a marketing research project may be in written form or slide-presentation format, depending on organizational culture and management preferences. Often a slide presentation is the preferred format for initially sharing research results with internal stakeholders. Particularly for large, complex projects, a written report may be a better format for discussing detailed findings and nuances in the data, which managers can study and reference in the future.

Applied Example: Analysis and Insights for Bookends

Getting the data was a bit of a hassle, but now you’ve got it and you’re excited to see what it reveals. Your statistician cousin, Marina, turns out to be a whiz with both the sales data and the census data. She identified several demographic profiles in the metro area that looked a lot like lifestyle segments. Then she mapped Bookends’ sales data into those segments to show who is and isn’t visiting Bookends. After matching customer survey data to the sales data, she broke down the segments further based on their spending levels and reasons they visit Bookends.

Gradually a clearer picture of Bookends’ customers is beginning to emerge: who they are, why they come, why they don’t come, and what role Bookends plays in their lives. Right away, a couple of higher-priority segments—based on their spending levels, proximity, and loyalty to Bookends—stand out. You and your uncle are definitely seeing some possibilities for making the bookstore a more prominent part of their lives. You capture these insights as “recommendations to be considered” while you evaluate the right marketing mix for each of the new segments you’d like to focus on.

Step 5: Take Action

Once the report is complete, the presentation is delivered, and the recommendations are made, the marketing research project is over, right? Wrong.

What comes next is arguably the most important step of all: taking action based on your research results.

If your project has done a good job interpreting the findings and translating them into recommendations for the marketing team and other areas of the business, this step may seem relatively straightforward. When the research results validate a path the organization is already on, the “take action” step can galvanize the team to move further and faster in that same direction.

Things are not so simple when the research results indicate a new direction or a significant shift is advisable. In these cases, it’s worthwhile to spend time helping managers understand the research, explain why it is wise to shift course, and explain how the business will benefit from the new path. As with any important business decision, managers must think deeply about the new approach and carefully map strategies, tactics, and available resources to plan effectively. By making the results available and accessible to managers and their execution teams, the marketing research project can serve as an ongoing guide and touchstone to help the organization plan, execute, and adjust course as it works toward desired goals and outcomes.

It is worth mentioning that many marketing research projects are never translated into management action. Sometimes this is because the report is too technical and difficult to understand. In other cases, the research conclusions fail to provide useful insights or solutions to the problem, or the report writer fails to offer specific suggestions for translating the research findings into management strategy. These pitfalls can be avoided by paying due attention to the research objectives throughout the project and allocating sufficient time and resources to do a good job interpreting research results for those who will need to act on them.

Applied Example: Bookends’ New Customer Campaign

Your research findings and recommendations identified three segments for Bookends to focus on. Based on the demographics, lifestyle, and spending patterns found during your marketing research, you’re able to name them: 1) Bored Empty-Nesters, 2) Busy Families, and 3) Hipster Wannabes. Dan has a decent-sized clientele across all three groups, and they are pretty good spenders when they come in. But until now he hasn’t done much to purposely attract any of them.

With newly identified segments in focus, you and Dan begin brainstorming about a marketing mix to target each group. What types of books and other products would appeal to each one? What activities or events would bring them into the store? Are there promotions or particular messages that would induce them to buy at Bookends instead of Amazon or another bookseller? How will Dan reach and communicate with each group? And what can you do to bring more new customers into the store within these target groups?

Even though Bookends is a real-life project with serious consequences for your uncle Dan, it’s also a fun laboratory where you can test out some of the principles you’re learning in your marketing class. You’re figuring out quickly what it’s like to be a marketer.

Well done, rookie!

Share This Book

Marketing

Defining the Market Research Problems

Market research companies have to overcome market research challenges to provide sound information and insights that drive the client company’s decision making.

Market research can only be useful when the respondents are engaged and honestly answer the client’s questions. Understanding the problems in conducting market research and methods to overcome them leads to better outcomes.

Good market research data helps the client make the right decisions. Optimal respondent engagement is vital to good quality market research responses. Stating the market research problem well ensures that the client obtains the data that answers their queries.

Problems In Conducting Market Research

Market research is a vital method by which companies listen to what their target audience has to say. If companies do not perform market research the only feedback that they will be getting from their customers is negative feedback. This is because people are more likely to contact a company to complain than for any other purpose.

Market research is also a means to gauge the opinions of potential customers and the target demographic. It guides both marketings as well as product development in an organization.

"Marketing without data is like driving with your eyes closed." - Dan Zarrella

1. Getting Access To Participants That Are Engaged In The Research

The respondent to a survey must be focused and interested in the questions that are being asked. The responses should be accurate and timely. This focus, interest, timeliness, and accuracy are called participant engagement. It is what prevents the respondent from randomly clicking through answers instead of answering them. Good participant engagement is vital to the quality of data that is collected from a survey.

One of the most common ways to measure participant engagement is to measure the time taken to answer the questions. A participant who zooms through the questions sooner than it takes to read the question is not optimally engaged. A participant should take enough time to read and comprehend the question before answering.

2. Respondents That Make Sense To The Research

Market research is only useful when the people who are surveyed are of the right demography. Properly defining the target audience is a market research problem that can be solved with forethought.

A market researcher should define the attributes of the target audience such as age, gender, location, income, education, job, marital status, ethnicity, etc. The strategy of the market research should then be tailored to target the right audience. When the respondents that the market research attracts are of an irrelevant demographic it defeats the purpose of the entire exercise.

“Whoever understands the customer best, wins.” - Mike Gospe

3. How To Choose What Is Important And What Is Not

Market research is meaningful only when the market research company uses multiple and holistic data sources. The data should be in the proper context and have meaning to the study. All too often, the problem in market research is too much data in answer to ‘What is a market research problem you are facing?’.

When you have too much data, the quality and relevance of the data come into question. Proper research design , processes, and methodology to manage, analyze and visualize big data are essential to a market research company.

“The goal is to transform data into information, and information into insight.” - Carly Fiorina

The digital transformation has changed the level of interaction between a client company and its customers. Companies engage with their customers on social media, apps, customer support , and online communities. They have direct access to customers and their ongoing relationship builds trust. This is a personal relationship as opposed to the impersonal approach of a market researcher with the target audience.

Market research requires that the researcher have access to the target group. This involves an impersonal relationship that maintains privacy. It is becoming increasingly difficult for market research companies to have the same level of access and engagement with customers or target customers of a company.

Market researchers have to find a way to engage with and excite their target audience so that they are relaxed and willing to share the required answers to questions. They should build a feel-good relationship to have a willing and engaged pool of respondents.‍

Managing Market Research Challenges

To increase levels of engagement in a market study, market research companies have devised newer strategies to attract and keep an audience. This includes creative surveys, rewards, and the use of technology to counteract the problems in conducting market research. One market research problem example could even be finding what rewards would be preferred by the target group.

1. When it comes to variety, it’s more the merrier

The fact that people like variety applies equally to ice cream as well as market research. When questions are similar and monotonous it may lead to a lack of interest. Making the question format varied is a simple yet effective way to keep the respondent engaged. You can also add a little humour to the questions. Make them more casual and out of the way for maximum impact. The more creative and catchy the survey is the better its response.

When a survey is memorable and interesting, the respondent will be willing to answer more surveys from the same market researcher in the future.

2. Thinking big with small attention spans

Attention spans are getting shorter. Survey as short as possible. The fewer the questions that are asked the better the attention and connection to the respondents. A market research survey must carefully weigh the necessity of every question that is asked.

Too many irrelevant questions stress the respondents and do not add any meaning or value to the market research problem. The shorter the time taken to answer the questions, the less respondent fatigue the survey faces.

3. An optimized survey is an amazing one

Most of the surveys that are being taken are now through digital mode. People use smart devices more than ever. So, your survey should be equally attractive on a computer screen as well as a phone or tablet screen.

The optimization of the survey can also be visual to appeal to the people who are being questioned. This includes the colour, images, language, and humour that is specific and relevant to the target group.

4. Rewards are the real game-changer

Rewarding respondents for their time and effort is on the upswing. This is to encourage people to be more willing to take a survey. The rewards that are given can be monetary or non-monetary. They are usually tailored to the preferences of the target audience. It is vital that the reward that is offered be attractive and relevant to the target group.

For example, a music-related survey could offer discounts on music or free merchandise directly related to the type of music that they would prefer. While physical gifts and souvenirs can be given, they also include the cost and logistics of delivering them. Coupons and vouchers are easier to deliver to the respondents.

One of the easiest and most attractive incentives is to use a platform such as Plum that offers a range of options. You can offer a basket of different incentives that appeal to many different types of people. The type and size of the incentive that is offered must be decided on based on how difficult the questions are and how much time and effort they take to answer.

The incentive should be attractive and relevant to the survey. Consistency in the reward pattern will ensure that the respondents are confident of the benefit that they will receive after the survey. Rewards that are instant and easy to redeem are the most memorable and preferred.

5. Stacking up on the right tech

Many tools are available and many are being released. A market analysis company should be updated on the latest developments in available technology. Not all tech tools live up to their marketing.

A market research company must be able to select the right technology and tools for the right job. The right reward programs should also be chosen for optimum results. Market researchers can use technology to automate and personalize their reward and incentive programs.

6. Stating the research problem and objectives

The quality and usability of a market research report depend on the right market research problem statement. The market research problem statement guides the research objectives as well as the direction and flow of the market analysis. It should be unambiguous.

Market Research Problem Statement

What is a market research problem.

The market research problem is the reason that the market research process is being conducted. It defines the research objectives, how the study is going to be conducted, what marketing metrics should be measured, and the conclusion that is expected as a result of the market research study. When the market research problem is vague or misinterpreted, the entire market study and its results will be a wasted exercise.

“Listening is hearing the needs of the customer, understanding those needs and making sure the company recognises the opportunity they present.” - Frank Eliason

Defining The Market Research Problem

The first part of the market research problem definition is to establish the context or background of the problem. This helps understand the need for the research and the issues that drive it. The next step is to clearly and unambiguously define the market research problem and justify the need for the market study. The third component of a good market research problem then suggests the methodology and types of data and sources that will be required.

The scope of the market research problem envisions the desired outcome of the study and how the results could be actionable. Many problems in conducting market research will be avoided if one correctly understands what is a market research problem. Defining the problem statement and research questions is vital to the success of the research challenge and market research.

Market Research Problem Example

Some market research problem example questions are:

What is the market size of a target market?
I am planning to open a store in the XYZ location. How many other competitors are located within walking distance from that area?
What are the most popular products or services in the XYZ category?
Which colour should our company website be?
What is the most wanted feature in my product or service category?
Would my best selling product or service do well in a particular region or country?

It’s quite a challenge to stay on top of the latest trends and improvements in technology. However, this can be solved by identifying the accurate problem statements and picking out the right metrics for market analysis, ensuring that the clients’ questions are answered accurately.

As for the problem of finding the right respondents and keeping them engaged, rewards and incentives are effective in getting quality outputs from the activity. The incentives can be monetary or non-monetary, and they must be quick to redeem, flexible, and appealing, leading to an engaged survey base and high-quality data from your next marketing campaign.

All You Need To Know About Virtual VISA Rewards Card

Guide to employer gift tax laws: in|us|uk|eur|sg|au|nz|chn.

-->Mohit Bansal -->

Mohit Bansal has 6 years of experience in solving early product and product marketing problems. In his last stint, he along with his co-founders bootstrapped a profitable startup.

Accelerate engagement and boost ROI of your marketing campaigns with digital rewards.

Fuel your demand generation campaigns with alluring rewards for maximized clicks. Chauffeur your prospects down the funnel.

Repeated customers are the lifelines of brands and retailers.

Entertain and retain your loyal customers with exclusive reward points. Use Xoxoday to create better relationships with your customers.

Quick Links

Prospects | Vendors

Thanksgiving | Work Anniversary | Birthday | Virtual Events | Wedding

Amazon gift cards | Zara gift cards | Paypal gift cards | Zomato gift cards | Ikea gift cards

Flipkart gift cards | Coinbase gift cards | Tommy Hilfiger gift cards | Adidas gift cards | Mcdonalds gift cards

Comprehensive sales playbook on strategic gifting | Digital gifting campaigns | Sales promotion campaign | Get more survey responses

Virtual rewards recognition | Guides | Motivate employees in organization

How to build a B2B loyalty program | B2B loyalty programs | Digital reward ideas to Drive Engagement | Customer retention strategies

Customer acquisition cost calculator | Customer churn rate calculator | Customer lifetime value calculator

Celebrate this Employee Appreciation Week with Your People. Learn More

Media Center
E-Books & White Papers
Knowledge Center

A Basic Guide to Defining Your Market Research Goals

by Caitlin Stewart , on May 29, 2014

market research process, featured on www.blog.marketresearch.com

1. Define the problem or opportunity and state your objectives

When creating a new goal, it is important to recognize any current problems in a company. You should also work to see whether a problem can be molded into an opportunity. Basic marketing research courses explain that a management problem is any type of issue that needs managerial action in order to resolve the issue. However, a marketing research problem is defined as a statement specifying the type of information needed by the decision maker to help solve the management problem and how that information can be obtained efficiently and effectively. To solve the market research problem, a research team can develop a marketing research objective, which is a goal defining the specific information needed to solve the marketing research problem.

Before you begin a project , make sure you clearly define your objectives and the outcomes you expect from the research that will be conducted. Having a clear and definitive goal is helpful because setting too many goals can dilute a project and increase the chance of having the research fail. By having reasonable goals, you can refer back to them during the project to distinguish whether the research is still keeping the original goals in mind.

2. Develop the research design to meet your objectives

The purpose of a well-developed research design is to confirm theories, measure brand loyalty, describe the population, build a customer profile, or to gain specific information. Based on what you are interested in, deciding whether a descriptive or causal study is needed to meet research objectives is key when starting your project.

Consider all potential issues that could arise during research so you and your research team can be prepared and aware if they occur. For example, if information being gathered is irrelevant to the company’s newly developed objectives, both time and money will be wasted on continuing with that specific research. If this ever occurs, reorganize and consider working with research specialists to help in making sure that the data you are observing is targeted at your specific needs.

3. Collect information relevant to your objectives

Once information and data is needed, sometimes the easiest step is to start looking at secondary data first. Utilizing data sets and examining organized marketing research reports have the potential to clarify your issues or even provide a solution to your research objectives. Secondary data can even alert researchers to other problems and is usually less expensive and faster to gather than primary data.

Once you review or purchase all your secondary data, your researchers can determine whether any further research through surveys or focus groups is necessary. Conducting that research and developing solutions from the information gathered will be required in drawing new conclusions.

4. Create a final report

Create a final report by analyzing all data and organizing it into a useful format for your company’s marketing team. Sorting through conclusions to relate potential solutions to your goals and objectives is central in ensuring your company can make use of the new information both effectively and beneficially.

5. Follow up

Once all findings are organized, you need to choose whether the information gathered is going to be put into use. You should use this stage to identify the areas where marketing techniques can be improved for future research projects. But once all is finished, evaluating whether the information gathered was able to help create solutions and meet your goals is vital. Upper management will need to determine whether the information gathered was a.) worth the cost, and b.) beneficial in meeting the outlined goals.

By knowing what your overall goals and objectives are before you begin a new project, you will help your company and yourself in making sure the research stays on task.

Interested in learning more about using business intelligence to achieve your research goals? Download our free white paper on How to Use Market Research to Launch Your Business.

Thanks for reading!

Caitlin Stewart Marketing Intern, MarketResearch.com

Download "The 5 Keys to Estimating Market Sizing for Strategic Decision Making"

About This Blog

Our goal is to help you better understand your customer, market, and competition in order to help drive your business growth.

From Our Blog

Subscribe to blog, connect with us.

6.3 Steps in a Successful Marketing Research Plan

Learning outcomes.

By the end of this section, you will be able to:

1 Identify and describe the steps in a marketing research plan.
2 Discuss the different types of data research.
3 Explain how data is analyzed.
4 Discuss the importance of effective research reports.

Define the Problem

There are seven steps to a successful marketing research project (see Figure 6.3 ). Each step will be explained as we investigate how a marketing research project is conducted.

The first step, defining the problem, is often a realization that more information is needed in order to make a data-driven decision. Problem definition is the realization that there is an issue that needs to be addressed. An entrepreneur may be interested in opening a small business but must first define the problem that is to be investigated. A marketing research problem in this example is to discover the needs of the community and also to identify a potentially successful business venture.

Many times, researchers define a research question or objectives in this first step. Objectives of this research study could include: identify a new business that would be successful in the community in question, determine the size and composition of a target market for the business venture, and collect any relevant primary and secondary data that would support such a venture. At this point, the definition of the problem may be “Why are cat owners not buying our new cat toy subscription service?”

Additionally, during this first step we would want to investigate our target population for research. This is similar to a target market, as it is the group that comprises the population of interest for the study. In order to have a successful research outcome, the researcher should start with an understanding of the problem in the current situational environment.

Develop the Research Plan

Step two is to develop the research plan. What type of research is necessary to meet the established objectives of the first step? How will this data be collected? Additionally, what is the time frame of the research and budget to consider? If you must have information in the next week, a different plan would be implemented than in a situation where several months were allowed. These are issues that a researcher should address in order to meet the needs identified.

Research is often classified as coming from one of two types of data: primary and secondary. Primary data is unique information that is collected by the specific researcher with the current project in mind. This type of research doesn’t currently exist until it is pulled together for the project. Examples of primary data collection include survey, observation, experiment, or focus group data that is gathered for the current project.

Secondary data is any research that was completed for another purpose but can be used to help inform the research process. Secondary data comes in many forms and includes census data, journal articles, previously collected survey or focus group data of related topics, and compiled company data. Secondary data may be internal, such as the company’s sales records for a previous quarter, or external, such as an industry report of all related product sales. Syndicated data , a type of external secondary data, is available through subscription services and is utilized by many marketers. As you can see in Table 6.1 , primary and secondary data features are often opposite—the positive aspects of primary data are the negative side of secondary data.

There are four research types that can be used: exploratory, descriptive, experimental, and ethnographic research designs (see Figure 6.4 ). Each type has specific formats of data that can be collected. Qualitative research can be shared through words, descriptions, and open-ended comments. Qualitative data gives context but cannot be reduced to a statistic. Qualitative data examples are categorical and include case studies, diary accounts, interviews, focus groups, and open-ended surveys. By comparison, quantitative data is data that can be reduced to number of responses. The number of responses to each answer on a multiple-choice question is quantitative data. Quantitative data is numerical and includes things like age, income, group size, and height.

Exploratory research is usually used when additional general information in desired about a topic. When in the initial steps of a new project, understanding the landscape is essential, so exploratory research helps the researcher to learn more about the general nature of the industry. Exploratory research can be collected through focus groups, interviews, and review of secondary data. When examining an exploratory research design, the best use is when your company hopes to collect data that is generally qualitative in nature. 7

For instance, if a company is considering a new service for registered users but is not quite sure how well the new service will be received or wants to gain clarity of exactly how customers may use a future service, the company can host a focus group. Focus groups and interviews will be examined later in the chapter. The insights collected during the focus group can assist the company when designing the service, help to inform promotional campaign options, and verify that the service is going to be a viable option for the company.

Descriptive research design takes a bigger step into collection of data through primary research complemented by secondary data. Descriptive research helps explain the market situation and define an “opinion, attitude, or behavior” of a group of consumers, employees, or other interested groups. 8 The most common method of deploying a descriptive research design is through the use of a survey. Several types of surveys will be defined later in this chapter. Descriptive data is quantitative in nature, meaning the data can be distilled into a statistic, such as in a table or chart.

Again, descriptive data is helpful in explaining the current situation. In the opening example of LEGO , the company wanted to describe the situation regarding children’s use of its product. In order to gather a large group of opinions, a survey was created. The data that was collected through this survey allowed the company to measure the existing perceptions of parents so that alterations could be made to future plans for the company.

Experimental research , also known as causal research , helps to define a cause-and-effect relationship between two or more factors. This type of research goes beyond a correlation to determine which feature caused the reaction. Researchers generally use some type of experimental design to determine a causal relationship. An example is A/B testing, a situation where one group of research participants, group A, is exposed to one treatment and then compared to the group B participants, who experience a different situation. An example might be showing two different television commercials to a panel of consumers and then measuring the difference in perception of the product. Another example would be to have two separate packaging options available in different markets. This research would answer the question “Does one design sell better than the other?” Comparing that to the sales in each market would be part of a causal research study. 9

The final method of collecting data is through an ethnographic design. Ethnographic research is conducted in the field by watching people interact in their natural environment. For marketing research, ethnographic designs help to identify how a product is used, what actions are included in a selection, or how the consumer interacts with the product. 10

Examples of ethnographic research would be to observe how a consumer uses a particular product, such as baking soda. Although many people buy baking soda, its uses are vast. So are they using it as a refrigerator deodorizer, a toothpaste, to polish a belt buckle, or to use in baking a cake?

Select the Data Collection Method

Data collection is the systematic gathering of information that addresses the identified problem. What is the best method to do that? Picking the right method of collecting data requires that the researcher understand the target population and the design picked in the previous step. There is no perfect method; each method has both advantages and disadvantages, so it’s essential that the researcher understand the target population of the research and the research objectives in order to pick the best option.

Sometimes the data desired is best collected by watching the actions of consumers. For instance, how many cars pass a specific billboard in a day? What website led a potential customer to the company’s website? When are consumers most likely to use the snack vending machines at work? What time of day has the highest traffic on a social media post? What is the most streamed television program this week? Observational research is the collecting of data based on actions taken by those observed. Many data observations do not require the researched individuals to participate in the data collection effort to be highly valuable. Some observation requires an individual to watch and record the activities of the target population through personal observations .

Unobtrusive observation happens when those being observed aren’t aware that they are being watched. An example of an unobtrusive observation would be to watch how shoppers interact with a new stuffed animal display by using a one-way mirror. Marketers can identify which products were handled more often while also determining which were ignored.

Other methods can use technology to collect the data instead. Instances of mechanical observation include the use of vehicle recorders, which count the number of vehicles that pass a specific location. Computers can also assess the number of shoppers who enter a store, the most popular entry point for train station commuters, or the peak time for cars to park in a parking garage.

When you want to get a more in-depth response from research participants, one method is to complete a one-on-one interview . One-on-one interviews allow the researcher to ask specific questions that match the respondent’s unique perspective as well as follow-up questions that piggyback on responses already completed. An interview allows the researcher to have a deeper understanding of the needs of the respondent, which is another strength of this type of data collection. The downside of personal interviews it that a discussion can be very time-consuming and results in only one respondent’s answers. Therefore, in order to get a large sample of respondents, the interview method may not be the most efficient method.

Taking the benefits of an interview and applying them to a small group of people is the design of a focus group . A focus group is a small number of people, usually 8 to 12, who meet the sample requirements. These individuals together are asked a series of questions where they are encouraged to build upon each other’s responses, either by agreeing or disagreeing with the other group members. Focus groups are similar to interviews in that they allow the researcher, through a moderator, to get more detailed information from a small group of potential customers (see Figure 6.5 ).

Link to Learning

Focus groups.

Focus groups are a common method for gathering insights into consumer thinking and habits. Companies will use this information to develop or shift their initiatives. The best way to understand a focus group is to watch a few examples or explanations. TED-Ed has this video that explains how focus groups work.

You might be asking when it is best to use a focus group or a survey. Learn the differences, the pros and cons of each, and the specific types of questions you ask in both situations in this article .

Preparing for a focus group is critical to success. It requires knowing the material and questions while also managing the group of people. Watch this video to learn more about how to prepare for a focus group and the types of things to be aware of.

One of the benefits of a focus group over individual interviews is that synergy can be generated when a participant builds on another’s ideas. Additionally, for the same amount of time, a researcher can hear from multiple respondents instead of just one. 11 Of course, as with every method of data collection, there are downsides to a focus group as well. Focus groups have the potential to be overwhelmed by one or two aggressive personalities, and the format can discourage more reserved individuals from speaking up. Finally, like interviews, the responses in a focus group are qualitative in nature and are difficult to distill into an easy statistic or two.

Combining a variety of questions on one instrument is called a survey or questionnaire . Collecting primary data is commonly done through surveys due to their versatility. A survey allows the researcher to ask the same set of questions of a large group of respondents. Response rates of surveys are calculated by dividing the number of surveys completed by the total number attempted. Surveys are flexible and can collect a variety of quantitative and qualitative data. Questions can include simplified yes or no questions, select all that apply, questions that are on a scale, or a variety of open-ended types of questions. There are four types of surveys (see Table 6.2 ) we will cover, each with strengths and weaknesses defined.

Let’s start off with mailed surveys —surveys that are sent to potential respondents through a mail service. Mailed surveys used to be more commonly used due to the ability to reach every household. In some instances, a mailed survey is still the best way to collect data. For example, every 10 years the United States conducts a census of its population (see Figure 6.6 ). The first step in that data collection is to send every household a survey through the US Postal Service (USPS). The benefit is that respondents can complete and return the survey at their convenience. The downside of mailed surveys are expense and timeliness of responses. A mailed survey requires postage, both when it is sent to the recipient and when it is returned. That, along with the cost of printing, paper, and both sending and return envelopes, adds up quickly. Additionally, physically mailing surveys takes time. One method of reducing cost is to send with bulk-rate postage, but that slows down the delivery of the survey. Also, because of the convenience to the respondent, completed surveys may be returned several weeks after being sent. Finally, some mailed survey data must be manually entered into the analysis software, which can cause delays or issues due to entry errors.

Phone surveys are completed during a phone conversation with the respondent. Although the traditional phone survey requires a data collector to talk with the participant, current technology allows for computer-assisted voice surveys or surveys to be completed by asking the respondent to push a specific button for each potential answer. Phone surveys are time intensive but allow the respondent to ask questions and the surveyor to request additional information or clarification on a question if warranted. Phone surveys require the respondent to complete the survey simultaneously with the collector, which is a limitation as there are restrictions for when phone calls are allowed. According to Telephone Consumer Protection Act , approved by Congress in 1991, no calls can be made prior to 8:00 a.m. or after 9:00 p.m. in the recipient’s time zone. 12 Many restrictions are outlined in this original legislation and have been added to since due to ever-changing technology.

In-person surveys are when the respondent and data collector are physically in the same location. In-person surveys allow the respondent to share specific information, ask questions of the surveyor, and follow up on previous answers. Surveys collected through this method can take place in a variety of ways: through door-to-door collection, in a public location, or at a person’s workplace. Although in-person surveys are time intensive and require more labor to collect data than some other methods, in some cases it’s the best way to collect the required data. In-person surveys conducted through a door-to-door method is the follow-up used for the census if respondents do not complete the mailed survey. One of the downsides of in-person surveys is the reluctance of potential respondents to stop their current activity and answer questions. Furthermore, people may not feel comfortable sharing private or personal information during a face-to-face conversation.

Electronic surveys are sent or collected through digital means and is an opportunity that can be added to any of the above methods as well as some new delivery options. Surveys can be sent through email, and respondents can either reply to the email or open a hyperlink to an online survey (see Figure 6.7 ). Additionally, a letter can be mailed that asks members of the survey sample to log in to a website rather than to return a mailed response. Many marketers now use links, QR codes, or electronic devices to easily connect to a survey. Digitally collected data has the benefit of being less time intensive and is often a more economical way to gather and input responses than more manual methods. A survey that could take months to collect through the mail can be completed within a week through digital means.

Design the Sample

Although you might want to include every possible person who matches your target market in your research, it’s often not a feasible option, nor is it of value. If you did decide to include everyone, you would be completing a census of the population. Getting everyone to participate would be time-consuming and highly expensive, so instead marketers use a sample , whereby a portion of the whole is included in the research. It’s similar to the samples you might receive at the grocery store or ice cream shop; it isn’t a full serving, but it does give you a good taste of what the whole would be like.

So how do you know who should be included in the sample? Researchers identify parameters for their studies, called sample frames . A sample frame for one study may be college students who live on campus; for another study, it may be retired people in Dallas, Texas, or small-business owners who have fewer than 10 employees. The individual entities within the sampling frame would be considered a sampling unit . A sampling unit is each individual respondent that would be considered as matching the sample frame established by the research. If a researcher wants businesses to participate in a study, then businesses would be the sampling unit in that case.

The number of sampling units included in the research is the sample size . Many calculations can be conducted to indicate what the correct size of the sample should be. Issues to consider are the size of the population, the confidence level that the data represents the entire population, the ease of accessing the units in the frame, and the budget allocated for the research.

There are two main categories of samples: probability and nonprobability (see Figure 6.8 ). Probability samples are those in which every member of the sample has an identified likelihood of being selected. Several probability sample methods can be utilized. One probability sampling technique is called a simple random sample , where not only does every person have an identified likelihood of being selected to be in the sample, but every person also has an equal chance of exclusion. An example of a simple random sample would be to put the names of all members of a group into a hat and simply draw out a specific number to be included. You could say a raffle would be a good example of a simple random sample.

Another probability sample type is a stratified random sample , where the population is divided into groups by category and then a random sample of each category is selected to participate. For instance, if you were conducting a study of college students from your school and wanted to make sure you had all grade levels included, you might take the names of all students and split them into different groups by grade level—freshman, sophomore, junior, and senior. Then, from those categories, you would draw names out of each of the pools, or strata.

A nonprobability sample is a situation in which each potential member of the sample has an unknown likelihood of being selected in the sample. Research findings that are from a nonprobability sample cannot be applied beyond the sample. Several examples of nonprobability sampling are available to researchers and include two that we will look at more closely: convenience sampling and judgment sampling.

The first nonprobability sampling technique is a convenience sample . Just like it sounds, a convenience sample is when the researcher finds a group through a nonscientific method by picking potential research participants in a convenient manner. An example might be to ask other students in a class you are taking to complete a survey that you are doing for a class assignment or passing out surveys at a basketball game or theater performance.

A judgment sample is a type of nonprobability sample that allows the researcher to determine if they believe the individual meets the criteria set for the sample frame to complete the research. For instance, you may be interested in researching mothers, so you sit outside a toy store and ask an individual who is carrying a baby to participate.

Collect the Data

Now that all the plans have been established, the instrument has been created, and the group of participants has been identified, it is time to start collecting data. As explained earlier in this chapter, data collection is the process of gathering information from a variety of sources that will satisfy the research objectives defined in step one. Data collection can be as simple as sending out an email with a survey link enclosed or as complex as an experiment with hundreds of consumers. The method of collection directly influences the length of this process. Conducting personal interviews or completing an experiment, as previously mentioned, can add weeks or months to the research process, whereas sending out an electronic survey may allow a researcher to collect the necessary data in a few days. 13

Analyze and Interpret the Data

Once the data has been collected, the process of analyzing it may begin. Data analysis is the distillation of the information into a more understandable and actionable format. The analysis itself can take many forms, from the use of basic statistics to a more comprehensive data visualization process. First, let’s discuss some basic statistics that can be used to represent data.

The first is the mean of quantitative data. A mean is often defined as the arithmetic average of values. The formula is:

A common use of the mean calculation is with exam scores. Say, for example, you have earned the following scores on your marketing exams: 72, 85, 68, and 77. To find the mean, you would add up the four scores for a total of 302. Then, in order to generate a mean, that number needs to be divided by the number of exam scores included, which is 4. The mean would be 302 divided by 4, for a mean test score of 75.5. Understanding the mean can help to determine, with one number, the weight of a particular value.

Another commonly used statistic is median. The median is often referred to as the middle number. To generate a median, all the numeric answers are placed in order, and the middle number is the median. Median is a common statistic when identifying the income level of a specific geographic region. 14 For instance, the median household income for Albuquerque, New Mexico, between 2015 and 2019 was $52,911. 15 In this case, there are just as many people with an income above the amount as there are below.

Mode is another statistic that is used to represent data of all types, as it can be used with quantitative or qualitative data and represents the most frequent answer. Eye color, hair color, and vehicle color can all be presented with a mode statistic. Additionally, some researchers expand on the concept of mode and present the frequency of all responses, not just identifying the most common response. Data such as this can easily be presented in a frequency graph, 16 such as the one in Figure 6.9 .

Additionally, researchers use other analyses to represent the data rather than to present the entirety of each response. For example, maybe the relationship between two values is important to understand. In this case, the researcher may share the data as a cross tabulation (see Figure 6.10 ). Below is the same data as above regarding social media use cross tabulated with gender—as you can see, the data is more descriptive when you can distinguish between the gender identifiers and how much time is spent per day on social media.

Not all data can be presented in a graphical format due to the nature of the information. Sometimes with qualitative methods of data collection, the responses cannot be distilled into a simple statistic or graph. In that case, the use of quotations, otherwise known as verbatims , can be used. These are direct statements presented by the respondents. Often you will see a verbatim statement when reading a movie or book review. The critic’s statements are used in part or in whole to represent their feelings about the newly released item.

Infographics

As they say, a picture is worth a thousand words. For this reason, research results are often shown in a graphical format in which data can be taken in quickly, called an infographic .

Check out this infographic on what components make for a good infographic. As you can see, a good infographic needs four components: data, design, a story, and the ability to share it with others. Without all four pieces, it is not as valuable a resource as it could be. The ultimate infographic is represented as the intersection of all four.

Infographics are particularly advantageous online. Refer to this infographic on why they are beneficial to use online .

Prepare the Research Report

The marketing research process concludes by sharing the generated data and makes recommendations for future actions. What starts as simple data must be interpreted into an analysis. All information gathered should be conveyed in order to make decisions for future marketing actions. One item that is often part of the final step is to discuss areas that may have been missed with the current project or any area of further study identified while completing it. Without the final step of the marketing research project, the first six steps are without value. It is only after the information is shared, through a formal presentation or report, that those recommendations can be implemented and improvements made. The first six steps are used to generate information, while the last is to initiate action. During this last step is also when an evaluation of the process is conducted. If this research were to be completed again, how would we do it differently? Did the right questions get answered with the survey questions posed to the respondents? Follow-up on some of these key questions can lead to additional research, a different study, or further analysis of data collected.

Methods of Quantifying Marketing Research

One of the ways of sharing information gained through marketing research is to quantify the research . Quantifying the research means to take a variety of data and compile into a quantity that is more easily understood. This is a simple process if you want to know how many people attended a basketball game, but if you want to quantify the number of students who made a positive comment on a questionnaire, it can be a little more complicated. Researchers have a variety of methods to collect and then share these different scores. Below are some of the most common types used in business.

Is a customer aware of a product, brand, or company? What is meant by awareness? Awareness in the context of marketing research is when a consumer is familiar with the product, brand, or company. It does not assume that the consumer has tried the product or has purchased it. Consumers are just aware. That is a measure that many businesses find valuable. There are several ways to measure awareness. For instance, the first type of awareness is unaided awareness . This type of awareness is when no prompts for a product, brand, or company are given. If you were collecting information on fast-food restaurants, you might ask a respondent to list all the fast-food restaurants that serve a chicken sandwich. Aided awareness would be providing a list of products, brands, or companies and the respondent selects from the list. For instance, if you give a respondent a list of fast-food restaurants and ask them to mark all the locations with a chicken sandwich, you are collecting data through an aided method. Collecting these answers helps a company determine how the business location compares to those of its competitors. 17

Customer Satisfaction (CSAT)

Have you ever been asked to complete a survey at the end of a purchase? Many businesses complete research on buying, returning, or other customer service processes. A customer satisfaction score , also known as CSAT, is a measure of how satisfied customers are with the product, brand, or service. A CSAT score is usually on a scale of 0 to 100 percent. 18 But what constitutes a “good” CSAT score? Although what is identified as good can vary by industry, normally anything in the range from 75 to 85 would be considered good. Of course, a number higher than 85 would be considered exceptional. 19

Customer Acquisition Cost (CAC) and Customer Effort Score (CES)

Other metrics often used are a customer acquisition cost (CAC) and customer effort score (CES). How much does it cost a company to gain customers? That’s the purpose of calculating the customer acquisition cost. To calculate the customer acquisition cost , a company would need to total all expenses that were accrued to gain new customers. This would include any advertising, public relations, social media postings, etc. When a total cost is determined, it is divided by the number of new customers gained through this campaign.

The final score to discuss is the customer effort score , also known as a CES. The CES is a “survey used to measure the ease of service experience with an organization.” 20 Companies that are easy to work with have a better CES than a company that is notorious for being difficult. An example would be to ask a consumer about the ease of making a purchase online by incorporating a one-question survey after a purchase is confirmed. If a number of responses come back negative or slightly negative, the company will realize that it needs to investigate and develop a more user-friendly process.

Knowledge Check

It’s time to check your knowledge on the concepts presented in this section. Refer to the Answer Key at the end of the book for feedback.

Defining the problem
Developing the research plan
Selecting a data collection method
Designing the sample
you are able to send it to all households in an area
it is inexpensive
responses are automatically loaded into the software
the data comes in quickly
Primary data
Secondary data
Secondary and primary data
Professional data
It shows how respondents answered two variables in relation to each other and can help determine patterns by different groups of respondents.
By presenting the data in the form of a picture, the information is easier for the reader to understand.
It is an easy way to see how often one answer is selected by the respondents.
This analysis can used to present interview or focus group data.

As an Amazon Associate we earn from qualifying purchases.

This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's permission.

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute OpenStax.

Access for free at https://openstax.org/books/principles-marketing/pages/1-unit-introduction

Authors: Dr. Maria Gomez Albrecht, Dr. Mark Green, Linda Hoffman
Publisher/website: OpenStax
Book title: Principles of Marketing
Publication date: Jan 25, 2023
Location: Houston, Texas
Book URL: https://openstax.org/books/principles-marketing/pages/1-unit-introduction
Section URL: https://openstax.org/books/principles-marketing/pages/6-3-steps-in-a-successful-marketing-research-plan

© Jan 9, 2024 OpenStax. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution License . The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.

To read this content please select one of the options below:

Please note you do not have access to teaching notes, problem‐definition in marketing research studies.

Journal of Consumer Marketing

ISSN : 0736-3761

Article publication date: 1 February 1989

Describes an approach that assists decision makers and market research analysts in problem‐definition in market research studies. Examines the two‐stage process of formulating an explicit research objective and developing a series of research questions to achieve that objective, illustrating the approach with examples. Concludes that while the approach does not provide insight into what is the right problem, it represents an aid to designing effective market research studies.

Decision making
Market research
Methodology

Chapman, R.G. (1989), "Problem‐Definition in Marketing Research Studies", Journal of Consumer Marketing , Vol. 6 No. 2, pp. 51-59. https://doi.org/10.1108/EUM0000000002547

We’re listening — tell us what you think, something didn’t work….

Report bugs here

All feedback is valuable

Please share your general feedback

Join us on our journey

Platform update page.

Visit emeraldpublishing.com/platformupdate to discover the latest news and updates

Questions & More Information

Answers to the most commonly asked questions here

4.3 Steps in the Marketing Research Process

Learning objectives.

After reading this section, students should be able to …

Describe the basic steps in the marketing research process and the purpose of each step.

The basic steps used to conduct marketing research are shown in Figure 4.6 “Steps in the Marketing Research Process”. Next, we discuss each step.

Figure 4.6: Steps in the Marketing Research Process

Step 1: Define the Problem (or Opportunity)

• In what semester(s) did your tutoring revenues fall (or rise)?

• In what subject areas did your tutoring revenues fall (or rise)?

• In what sales channels did revenues fall (or rise): Were there fewer (or more) referrals from professors or other students? Did the ad you ran result in fewer (or more) referrals this month than in the past months?

• Among what demographic groups did your revenues fall (or rise)—women or men, people with certain majors, or first-year, second-, third-, or fourth-year students?

The key is to look at all potential causes so as to narrow the parameters of the study to the information you actually need to make a good decision about how to fix your business if revenues have dropped or whether or not to expand it if your revenues have exploded. The next task for the researcher is to put into writing the research objective. The research objective is the goal(s) the research is supposed to accomplish. The marketing research objective for your tutoring business might read as follows:

To survey college professors who teach 100- and 200-level math courses to determine why the number of students referred for tutoring dropped in the second semester. This is admittedly a simple example designed to help you understand the basic concept. If you take a marketing research course, you will learn that research objectives get a lot more complicated than this. The following is an example:

Watch Video Clip: New Coke Is It! 1985

https://www.youtube.com/watch?v=W6t7deaplgY

This video documents the Coca-Cola Company’s ill-fated launch of New Coke in 1985.

Watch Video Clip: 1985 Pepsi Commercial—“They Changed My Coke”

https://www.youtube.com/watch?v=8_hvOBnsirI

This video shows how Pepsi tried to capitalize on the blunder.

Step 2: Design the Research

Sources of Secondary Data

Your company’s internal records are a source of secondary data. So are any data you collect as part of your marketing intelligence gathering efforts. You can also purchase syndicated research. Syndicated research is primary data that marketing research firms collect on a regular basis and sell to other companies. J.D. Power & Associates is a provider of syndicated research. The company conducts independent, unbiased surveys of customer satisfaction, product quality, and buyer behavior for various industries. The company is best known for its research in the automobile sector. One of the best-known sellers of syndicated research is the Nielsen Company, which produces the Nielsen ratings. The Nielsen ratings measure the size of television, radio, and newspaper audiences in various markets. You have probably read or heard about TV shows that get the highest (Nielsen) ratings. (Arbitron does the same thing for radio ratings.) Nielsen, along with its main competitor, Information Resources, Inc. (IRI), also sells businesses scanner-based research. Scanner-based research is information collected by scanners at checkout stands in stores. Each week Nielsen and IRI collect information on the millions of purchases made at stores. The companies then compile the information and sell it to firms in various industries that subscribe to their services. The Nielsen Company has also recently teamed up with Facebook to collect marketing research information. Via Facebook, users will see surveys in some of the spaces in which they used to see online ads (Rappeport, Gelles, 2009)

Figure 4.7: Secondary data

Market research aggregators buy research reports from other marketing research companies and then resell them in part or in whole to other companies so they don’t have to gather primary data.

The Survey Research Center at the University of Michigan also conducts periodic surveys and publishes information about trends in the United States. One research study the center continually conducts is called the “Changing Lives of American Families” (http://www.isr.umich.edu/home/news/research-update/2007-01.pdf). This is important research data for marketing managers monitoring consumer trends in the marketplace. The World Bank and the United Nations are two international organizations that collect a great deal of information. Their Web sites contain many free research studies and data related to global markets. Table 10.1 “Examples of Primary Data Sources versus Secondary Data Sources” shows some examples of primary versus secondary data sources.

Table 4.2 Examples of Primary Data Sources versus Secondary Data Sources

Gauging the Quality of Secondary Data

Gauging the Credibility of Secondary Data: Questions to Ask

Who gathered this information?
For what purpose?
What does the person or organization that gathered the information have to gain by doing so?
Was the information gathered and reported in a systematic manner?
Is the source of the information accepted as an authority by other experts in the field?
Does the article provide objective evidence to support the position presented?

Types of Research Design

Exploratory research design
Descriptive research design
Causal research design (experiments)

One form of exploratory research is qualitative research. Qualitative research is any form of research that includes gathering data that is not quantitative, and often involves exploring questions such as why as much as what or how much. Different forms, such as depth interviews and focus group interviews, are common in marketing research.

The depth interview—engaging in detailed, one-on-one, question-and-answer sessions with potential buyers—is an exploratory research technique. However, unlike surveys, the people being interviewed aren’t asked a series of standard questions. Instead the interviewer is armed with some general topics and asks questions that are open ended, meaning that they allow the interviewee to elaborate. “How did you feel about the product after you purchased it?” is an example of a question that might be asked. A depth interview also allows a researcher to ask logical follow-up questions such as “Can you tell me what you mean when you say you felt uncomfortable using the service?” or “Can you give me some examples?” to help dig further and shed additional light on the research problem. Depth interviews can be conducted in person or over the phone. The interviewer either takes notes or records the interview

The Basic Steps of Conducting a Focus Group

Establish the objectives of the focus group. What is its purpose?
Identify the people who will participate in the focus group. What makes them qualified to participate? How many of them will you need and what they will be paid?
Obtain contact information for the participants and send out invitations (usually e-mails are most efficient).
Develop a list of questions.
Choose a facilitator.
Choose a location in which to hold the focus group and the method by which it will be recorded.
Conduct the focus group. If the focus group is not conducted electronically, include name tags for the participants, pens and notepads, any materials the participants need to see, and refreshments. Record participants’ responses.
Summarize the notes from the focus group and write a report for management.

Two other types of qualitative data used for exploratory research are ethnographies and projective techniques. In an ethnography, researchers interview, observe, and often videotape people while they work, live, shop, and play. The Walt Disney Company has recently begun using ethnographers to uncover the likes and dislikes of boys aged six to fourteen, a financially attractive market segment for Disney, but one in which the company has been losing market share. The ethnographers visit the homes of boys, observe the things they have in their rooms to get a sense of their hobbies, and accompany them and their mothers when they shop to see where they go, what the boys are interested in, and what they ultimately buy. (The children get seventy-five dollars out of the deal, incidentally.) (Barnes, 2009)

Projective techniques are used to reveal information research respondents might not reveal by being asked directly. Asking a person to complete sentences such as the following is one technique:

People who buy Coach handbags __________. (Will he or she reply with “are cool,” “are affluent,” or “are pretentious,” for example?)

KFC’s grilled chicken is ______.

Completing cartoons is yet another type of projective technique. It’s similar to finishing a sentence or story, only with the pictures. People are asked to look at a cartoon such as the one shown in Figure 10.8 “Example of a Cartoon-Completion Projective Technique”. One of the characters in the picture will have made a statement, and the person is asked to fill in the empty cartoon “bubble” with how they think the second character will respond.

Figure 4.8: Example of a Cartoon-Completion Projective Technique

In some cases, your research might end with exploratory research. Perhaps you have discovered your organization lacks the resources needed to produce the product. In other cases, you might decide you need more in-depth, quantitative research such as descriptive research or causal research, which are discussed next. Most marketing research professionals advise using both types of research, if it’s feasible. On the one hand, the qualitative-type research used in exploratory research is often considered too “lightweight.” Remember earlier in the chapter when we discussed telephone answering machines and the hit TV sitcom Seinfeld? Both product ideas were initially rejected by focus groups. On the other hand, relying solely on quantitative information often results in market research that lacks ideas.

Watch Video Clip: The Stone Wheel—What One Focus Group Said

https://www.youtube.com/watch?v=OORnMYoWX9c

Watch the video to see a funny spoof on the usefulness—or lack of usefulness—of focus groups.

Descriptive Research

Anything that can be observed and counted falls into the category of descriptive research design. A study using a descriptive research design involves gathering hard numbers, often via surveys, to describe or measure a phenomenon so as to answer the questions of who, what, where, when, and how. “On a scale of 1–5, how satisfied were you with your service?” is a question that illustrates the information a descriptive research design is supposed to capture.

It involves recording the movements of a person’s eyes when they look at some sort of stimulus, such as a banner ad or a Web page. The Walt Disney Company has a research facility in Austin, Texas, that it uses to take physical measurements of viewers when they see Disney programs and advertisements. The facility measures three types of responses: people’s heart rates, skin changes, and eye movements (eye tracking) (Spangler, 2009).

Figure 4.9: Descriptive research

A woman shows off her headgear for an eye-tracking study. The gear’s not exactly a fashion statement but . . .

(lawrencegs – Google Glass – CC BY 2.0)

Causal Research

An experiment conducted in a natural setting such as a store is referred to as a field experiment. Companies sometimes do field experiments either because it is more convenient or because they want to see if buyers will behave the same way in the “real world” as in a laboratory or on a computer. The place the experiment is conducted or the demographic group of people the experiment is administered to is considered the test market. Before a large company rolls out a product to the entire marketplace, it will often place the offering in a test market to see how well it will be received. For example, to compete with MillerCoors’ sixty-four-calorie beer MGD 64, Anheuser-Busch recently began testing its Select 55 beer in certain cities around the country (McWilliams, 2009).

Figure 4.10: Test Market

Select 55 beer: Coming soon to a test market near you? (If you’re on a diet, you have to hope so!)

(Martine – Le champagne – CC BY-NC 2.0)

Step 3: Design the Data-Collection Forms

Questionnaire Design

To see some examples of questionnaires and how they are laid out, click on the following link: http://cas.uah.edu/wrenb/ mkt343/Project/Sample%20Questionnaires.htm.

Don’t you agree that teachers should be paid more?

The questions also need to be clear and unambiguous.

Consider the following question: Which brand of toothpaste do you use?

The question sounds clear enough, but is it really? What if the respondent recently switched brands? What if she uses Crest at home, but while away from home or traveling, she uses Colgate’s Wisp portable toothpasteand-brush product? How will the respondent answer the question? Rewording the question as follows so it’s more specific will help make the question clearer:

Which brand of toothpaste have you used at home in the past six months? If you have used more than one brand, please list each of them (1).

__0–5 alcoholic beverages
__5–10 alcoholic beverages
__10–15 alcoholic beverages

Many people don’t like to answer questions about their income levels. Asking them to specify income ranges rather than divulge their actual incomes can help.

Other research question “don’ts” include using jargon and acronyms that could confuse people. “How often do you IM?” is an example. Also, don’t muddy the waters by asking two questions in the same question, something researchers refer to as a double-barreled question. “Do you think parents should spend more time with their children and/or their teachers?” is an example of a double-barreled question.

Open-ended questions, or questions that ask respondents to elaborate, can be included. However, they are harder to tabulate than closed-ended questions, or questions that limit a respondent’s answers. Multiple-choice and yes-and-no questions are examples of closed-ended questions.

Testing the Questionnaire

Step 4: Specify the Sample

The next step is to put together the sampling frame, which is the list from which the sample is drawn. The sampling frame can be put together using a directory, customer list, or membership roster (Wrenn et. al., 2007). Keep in mind that the sampling frame won’t perfectly match the population. Some people will be included on the list who shouldn’t be. Other people who should be included will be inadvertently omitted. It’s no different than if you were to conduct a survey of, say, 25 percent of your friends, using friends’ names you have in your cell phone. Most of your friends’ names are likely to be programmed into your phone, but not all of them. As a result, a certain degree of sampling error always occurs.

Statistics can be used to determine a sample’s optimal size. If you take a marketing research or statistics class, you will learn more about how to determine the optimal size.

Step 5: Collect the Data

Watch Video Clip

https://www.youtube.com/watch?v=Rsth2qvWFfw

Make Extra Money as a Mystery Shopper

Watch the YouTube video to get an idea of how mystery shopping works.

Survey data can be collected in many different ways and combinations of ways. The following are the basic methods used:

Face-to-face (can be computer aided)
Telephone (can be computer aided or completely automated)
Mail and hand delivery
E-mail and the Web

Probably the biggest drawback of both surveys conducted face-to-face and administered over the phone by a person is that they are labor-intensive and therefore costly. Mailing out questionnaires is costly, too, and the response rates can be rather low. Think about why that might be so: if you receive a questionnaire in the mail, it is easy to throw it in the trash; it’s harder to tell a market researcher who approaches you on the street that you don’t want to be interviewed.

By contrast, gathering survey data collected by a computer, either over the telephone or on the Internet, can be very cost-effective and in some cases free. SurveyMonkey and Zoomerang are two Web sites that will allow you to create online questionnaires, e-mail them to up to one hundred people for free, and view the responses in real-time as they come in. For larger surveys, you have to pay a subscription price of a few hundred dollars. But that still can be extremely cost-effective. The two Web sites also have a host of other features such as online-survey templates you can use to create your questionnaire, a way to set up automatic reminders sent to people who haven’t yet completed their surveys, and tools you can use to create graphics to put in your final research report. To see how easy it is to put together a survey in SurveyMonkey, click on the following link: http://help.surveymonkey.com/app/tutorials/ detail/a_id/423.

Figure 4.11: Data collection

Training people so they know what constitutes different ratings when they are collecting data will improve the quality of the information gathered in a marketing research study.

(Ricardo Rodriquez – Satisfaction survey – CC BY-NC-ND 2.0)

Student Example

Over the 4th of July week, I went to Home Depot to get some fertilizer. In the aisle, a person came up to me and asked if I wanted to take a survey. He said it wouldn’t take long so I agreed. He asked some questions about tap water, e.g., if I use a filter or not. Then he concluded by asking for my phone number in which I declined. It made me wonder what the goal of this survey was, whether the specific details gathered from my answers would be used to sell something to me, or if they truly wanted to know what customers wanted, data which would be input into their marketing research system.

Class of 2020

In my most recent trip to Disneyland, I encountered Cast Members stationed down Main Street, with tablet computers in hand, ready to approach guests as they leave the park for the day. The Cast Members were actively collecting data from park guests through either a brief interview in which the information was input into their tablet, or offered to send an email data collection form to willing respondents. I appreciate how the researchers utilized both in-person interviews and online surveys to gather pertinent information from a varied group of guests.

Lacey Lober

Collecting International Marketing Research Data

What kind of challenges do firms face when trying to conduct marketing research abroad? As we explained, face-to-face surveys are commonly used in third world countries to collect information from people who cannot read or lack phones and computers. However, face-to-face surveys are also common in Europe, despite the fact that phones and computers are readily available. In-home surveys are also common in parts of Europe. By contrast, in some countries, including many Asian countries, it’s considered taboo or rude to try to gather information from strangers either face-to-face or over the phone. In many Muslim countries, women are forbidden to talk to strangers. And how do you figure out whom to research in foreign countries? That in itself is a problem. In the United States, researchers often ask if they can talk to the heads of households to conduct marketing research. But in countries in which domestic servants or employees are common, the heads of households aren’t necessarily the principal shoppers; their domestic employees are (Malhotra).

One way companies try to deal with translation problems is by using back translation. When back translation is used, a native speaker translates the survey into the foreign language and then translates it back again to the original language to determine if there were gaps in meaning—that is, if anything was lost in translation. And it’s not just the language that’s an issue. If the research involves any visual images, they, too, could be a point of confusion. Certain colors, shapes, and symbols can have negative connotations in other countries. For example, the color white represents purity in many Western cultures, but in China, it is the color of death and mourning (Zouhali-Worrall, 2008). Also, look back at the cartoon-completion exercise in Figure 10.8 “Example of a CartoonCompletion Projective Technique”. What would women in Muslim countries who aren’t allowed to converse with male sellers think of it? Chances are, the cartoon wouldn’t provide you with the information you’re seeking if Muslim women in some countries were asked to complete it.

Step 6: Analyze the Data

Once all the data is collected, the researchers begin the data cleaning, which is the process of removing data that have accidentally been duplicated (entered twice into the computer) or correcting data that have obviously been recorded wrong. A program such as Microsoft Excel or a statistical program such as Predictive Analytics Software (PASW, which was formerly known as SPSS) is then used to tabulate, or calculate, the basic results of the research, such as the total number of participants and how collectively they answered various questions. The programs can also be used to calculate averages, such as the average age of respondents, their average satisfaction, and so forth. The same can done for percentages, and other values you learned about, or will learn about, in a statistics course, such as the standard deviation, mean, and median for each question.

The two most commonly used criteria used to test the soundness of a study are (1) validity and (2) reliability. A study is valid if it actually tested what it was designed to test. For example, did the experiment you ran in Second Life test what it was designed to test? Did it reflect what could really happen in the real world? If not, the research isn’t valid. If you were to repeat the study, and get the same results (or nearly the same results), the research is said to be reliable. If you get a drastically different result if you repeat the study, it’s not reliable. The data collected, or at least some it, can also be compared to, or reconciled with, similar data from other sources either gathered by your firm or by another organization to see if the information seems on target.

Stage 7: Write the Research Report and Present Its Findings

The six basic elements of a research report are as follows.

1. Title Page . The title page explains what the report is about, when it was conducted and by whom, and who requested it.

2. Table of Contents. The table of contents outlines the major parts of the report, as well as any graphs and charts, and the page numbers on which they can be found.

3. Executive Summary. The executive summary summarizes all the details in the report in a very quick way. Many people who receive the report—both executives and nonexecutives—won’t have time to read the entire report. Instead, they will rely on the executive summary to quickly get an idea of the study’s results and what to do about those results.

4. Methodology and Limitations. The methodology section of the report explains the technical details of how the research was designed and conducted. The section explains, for example, how the data was collected and by whom, the size of the sample, how it was chosen, and whom or what it consisted of (e.g., the number of women versus men or children versus adults). It also includes information about the statistical techniques used to analyze the data. Every study has errors—sampling errors, interviewer errors, and so forth. The methodology section should explain these details, so decision makers can consider their overall impact. The margin of error is the overall tendency of the study to be off kilter—that is, how far it could have gone wrong in either direction. Remember how newscasters present the presidential polls before an election? They always say, “This candidate is ahead 48 to 44 percent, plus or minus 2 percent.” That “plus or minus” is the margin of error. The larger the margin of error is, the less likely the results of the study are accurate. The margin of error needs to be included in the methodology section.

5. Findings. The findings section is a longer, fleshed-out version of the executive summary that goes into more detail about the statistics uncovered by the research that bolster the study’s findings. If you have related research or secondary data on hand that back up the findings, it can be included to help show the study did what it was designed to do.

6. Recommendations. The recommendations section should outline the course of action you think should be taken based on the findings of the research and the purpose of the project. For example, if you conducted a global market research study to identify new locations for stores, make a recommendation for the locations (Mersdorf, 2009).

Step 1 in the marketing research process is to define the problem. Businesses take a look at what they believe are symptoms and try to drill down to the potential causes so as to precisely define the problem. The next task for the researcher is to put into writing the research objective, or goal, the research is supposed to accomplish.
Step 2 in the process is to design the research. The research design is the “plan of attack.” It outlines what data you are going to gather, from whom, how, and when, and how you’re going to analyze it once it has been obtained.
Step 3 is to design the data-collection forms, which need to be standardized so the information gathered on each is comparable. Surveys are a popular way to gather data because they can be easily administered to large numbers of people fairly quickly. However, to produce the best results, survey questionnaires need to be carefully designed and pretested before they are used.
Step 4 is drawing the sample, or a subset of potential buyers who are representative of your entire target market. If the sample is not correctly selected, the research will be flawed.
Step 5 is to actually collect the data, whether it’s collected by a person face-to-face, over the phone, or with the help of computers or the Internet. The data-collection process is often different in foreign countries.
Step 6 is to analyze the data collected for any obvious errors, tabulate the data, and then draw conclusions from it based on the results.
The last step in the process, Step 7, is writing the research report and presenting the findings to decision makers.

(1) “Questionnaire Design,” QuickMBA, http://www.quickmba.com/marketing/research/qdesign (accessed December 14, 2009).

Barnes, B., “Disney Expert Uses Science to Draw Boy Viewers,” New York Times, April 15, 2009, http://www.nytimes.com/2009/04/14/arts/television/14boys.html?pagewanted=1&_r=1 (accessed December 14, 2009).

Burns A. and Ronald Bush, Marketing Research, 6th ed. (Upper Saddle River, NJ: Prentice Hall, 2010), 85.

Malhotra, N., Marketing Research: An Applied Approach, 6th ed. (Upper Saddle River, NJ: Prentice Hall), 764.

McDaniel, C. D. and Roger H. Gates, Marketing Research Essentials, 2nd ed. (Cincinnati: South-Western College Publishing, 1998), 61.

McWilliams, J., “A-B Puts Super-Low-Calorie Beer in Ring with Miller,” St. Louis Post-Dispatch, August 16, 2009, http://www.stltoday.com/business/next-matchup-light-weights-a-b-puts-super-low-calorie/article_47511bfe-18ca-5979-bdb9-0526c97d4edf.html (accessed April 13, 2012).

Mersdorf, S., “How to Organize Your Next Survey Report,” Cvent, August 24, 2009, http://survey.cvent.com/blog/cvent-survey/0/0/how-to-organize-your-next-survey-report (accessed December 14, 2009).

Rappeport A. and David Gelles, “Facebook to Form Alliance with Nielsen,” Financial Times, September 23, 2009, 16.

Spangler, T., “Disney Lab Tracks Feelings,” Multichannel News 30, no. 30 (August 3, 2009): 26.

Wagner, J., “Marketing in Second Life Doesn’t Work…Here Is Why!” GigaOM, April 4, 2007,http://gigaom.com/2007/04/04/3-reasons-why-marketing-in-second-life-doesnt-work (accessed December 14,2009).

Wrenn, B., Robert E. Stevens, and David L. Loudon, Marketing Research: Text and Cases, 2nd ed. (Binghamton, NY: Haworth Press, 2007), 180.

Zouhali-Worrall, M., “Found in Translation: Avoiding Multilingual Gaffes,” CNNMoney.com, July 14, 2008, http://money.cnn.com/2008/07/07/smallbusiness/language_translation.fsb/index.htm (accessed December 14, 2009).

Share This Book

Increase Font Size

Module 6: Marketing Information and Research

The marketing research process, learning objectives.

Identify the steps of conducting a marketing research project

A Standard Approach to Research Inquiries

Step 1: Identify the Problem

The first step for any marketing research activity is to clearly identify and define the problem you are trying to solve. You start by stating the marketing or business problem you need to address and for which you need additional information to figure out a solution. Next, articulate the objectives for the research: What do you want to understand by the time the research project is completed? What specific information, guidance, or recommendations need to come out of the research in order to make it a worthwhile investment of the organization’s time and money?

Applied Example: Marketing Research for Bookends

Step 2: Develop a Research Plan

Once you have a problem definition, research objectives, and a preliminary set of research questions, the next step is to develop a research plan. Essential to this plan is identifying precisely what information you need to answer your questions and achieve your objectives. Do you need to understand customer opinions about something? Are you looking for a clearer picture of customer needs and related behaviors? Do you need sales, spending, or revenue data? Do you need information about competitors’ products, or insight about what will make prospective customers notice you? When do need the information, and what’s the time frame for getting it? What budget and resources are available?

Applied Example: A Bookends Research Plan

Dan is enthusiastic, but he’s also short on money. You realize that such a financial constraint will limit what’s possible, but with Dan’s help you can do something worthwhile. Below is the research plan you sketch out:

Step 3: Conduct the Research

Typically data collection begins by reviewing any existing research and data that provide some information or insight about the problem. As a rule, this is secondary research. Prior research projects, internal data analyses, industry reports, customer-satisfaction survey results, and other information sources may be worthwhile to review. Even though these resources may not answer your research questions fully, they may further illuminate the problem you are trying to solve. Secondary research and data sources are nearly always cheaper than capturing new information on your own. Your marketing research project should benefit from prior work wherever possible.

After getting everything you can from secondary research, it’s time to shift attention to primary research, if this is part of your research plan. Primary research involves asking questions and then listening to and/or observing the behavior of the target audience you are studying. In order to generate reliable, accurate results, it is important to use proper scientific methods for primary research data collection and analysis. This includes identifying the right individuals and number of people to talk to, using carefully worded surveys or interview scripts, and capturing data accurately.

Without proper techniques, you may inadvertently get bad data or discover bias in the responses that distorts the results and points you in the wrong direction. The module on Marketing Research Techniques discusses these issues in further detail, since the procedures for getting reliable data vary by research method.

Applied Example: Getting the Data on Bookends

Dan is on board with the research plan, and he’s excited to dig into the project. You start with secondary data, getting a dump of Dan’s sales data from the past two years, along with related information: customer name, zip code, frequency of purchase, gender, date of purchase, and discounts/promotions (if any).

You visit the U.S. Census Bureau Web site to download demographic data about your metro area. The data show all zip codes in the area, along with population size, gender breakdown, age ranges, income, and education levels.

The next part of the project is customer-survey data. You work with Dan to put together a short survey about customer attitudes toward Bookends, how often and why they come, where else they spend money on books and entertainment, and why they go other places besides Bookends. Dan comes up with the great idea of offering a 5 percent discount coupon to anyone who completes the survey. Although it eats into his profits, this scheme gets more people to complete the survey and buy books, so it’s worth it.

Guy with a beard wearing a red hat pushes a stroller while a woman checks the child and talks on her cell phone. Two young people in the background. Seattle hipsters.

For a couple of days, you and Dan take turns doing “man on the street” interviews (you interview the guy in the red hat, for instance). You find people who say they’ve never been to Bookends and ask them a few questions about why they haven’t visited the store, where else they buy books and other entertainment, and what might get them interested in visiting Bookends sometime. This is all a lot of work, but for a zero-budget project, it’s coming together pretty well.

Step 4: Analyze and Report Findings

Analysis starts with formatting, cleaning, and editing the data to make sure that it’s suitable for whatever analytical techniques are being used. Next, data are tabulated to show what’s happening: What do customers actually think? What’s happening with purchasing or other behaviors? How do revenue figures actually add up? Whatever the research questions, the analysis takes source data and applies analytical techniques to provide a clearer picture of what’s going on. This process may involve simple or sophisticated techniques, depending on the research outcomes required. Common analytical techniques include regression analysis to determine correlations between factors; conjoint analysis to determine trade-offs and priorities; predictive modeling to anticipate patterns and causality; and analysis of unstructured data such as Internet search terms or social media posts to provide context and meaning around what people say and do.

Good analysis is important because the interpretation of research data—the “so what?” factor—depends on it. The analysis combs through data to paint a picture of what’s going on. The interpretation goes further to explain what the research data mean and make recommendations about what managers need to know and do based on the research results. For example, what is the short list of key findings and takeaways that managers should remember from the research? What are the market segments you’ve identified, and which ones should you target? What are the primary reasons your customers choose your competitor’s product over yours, and what does this mean for future improvements to your product?

Applied Example: Analysis and Insights for Bookends

Getting the data was a bit of a hassle, but now you’ve got it, and you’re excited to see what it reveals. Your statistician cousin, Marina, turns out to be a whiz with both the sales data and the census data. She identified several demographic profiles in the metro area that looked a lot like lifestyle segments. Then she mapped Bookends’ sales data into those segments to show who is and isn’t visiting Bookends. After matching customer-survey data to the sales data, she broke down the segments further based on their spending levels and reasons they visit Bookends.

Step 5: Take Action

Once the report is complete, the presentation is delivered, and the recommendations are made, the marketing research project is over, right? Wrong.

What comes next is arguably the most important step of all: taking action based on your research results.

Applied Example: Bookends’ New Customer Campaign

Well done, rookie!

Check Your Understanding

Answer the question(s) below to see how well you understand the topics covered in this outcome. This short quiz does not count toward your grade in the class, and you can retake it an unlimited number of times.

Use this quiz to check your understanding and decide whether to (1) study the previous section further or (2) move on to the next section.

Revision and Adaptation. Authored by : Lumen Learning. License : CC BY: Attribution
Chapter 3: Marketing Research: An Aid to Decision Making, from Introducing Marketing. Authored by : John Burnett. Provided by : Global Text. Located at : http://solr.bccampus.ca:8001/bcc/file/ddbe3343-9796-4801-a0cb-7af7b02e3191/1/Core%20Concepts%20of%20Marketing.pdf . License : CC BY: Attribution
Urban life (Version 2.0). Authored by : Ian D. Keating. Located at : https://www.flickr.com/photos/ian-arlett/19313315520/ . License : CC BY: Attribution

More From Forbes

How to avoid channel conflicts as a b2b marketer.

Share to Facebook
Share to Twitter
Share to Linkedin

B2B marketers reach their customers through different channels, and if these channels start competing with each other instead of working together, it creates a conflict. One channel trying to undercut the other can upend carefully crafted marketing strategies and lead to price wars.

Ultimately, channel conflicts make it harder for a B2B marketer to orchestrate promotions and deliver consistent messaging, potentially confusing customers and hurting their brand’s image. Below, 10 members of Forbes Agency Council share ways to avoid B2B channel conflicts and come up with a winning strategy.

1. Implement Universal Pricing Software

An example of a channel conflict would be if the B2C division is selling products at a lower price than its B2B counterpart. Having universal pricing software that the business and all of its partners are plugged into is a great way to remedy this and keep the line of communication consistent. - Spencer Hadelman , Advantage Marketing

2. Fairly Compensate Distribution Partners

In B2B, a channel conflict often occurs when a manufacturer sells directly to end customers, bypassing distributors. For example, a manufacturer of industrial machinery might decide to sell directly to businesses. To prevent conflict in the first place, provide fair compensation and incentives to distribution partners for selling your products. - Joschka Weltgen , Compado

3. Establish Clear Channel Policies

A channel conflict in B2B might occur when a manufacturer competes with its distributors by selling directly to consumers at a lower price. To avoid this, marketers should establish clear channel policies, define territories and implement a pricing strategy that respects the roles and margins of each channel partner, ensuring a cooperative ecosystem. - Kenny Tripura , Edkent Media

Huawei s Pura 70 Ultra Beats iPhone With Pioneering New Feature

The juan soto trade has helped both the yankees and the san diego padres, four reportedly hurt after army horses run loose through central london, 4. make product lines exclusive to each channel.

A toy company could decide to sell its product to retail chains and independent stores, creating pricing conflict. Marketers can avoid this conflict with product lines exclusive to each channel, tiered pricing and clear policies that outline rules governing promotion and distribution. Offering clarity and transparency builds trust and drives higher sales by keeping all channel partners happy. - Mary Ann O’Brien , OBI Creative

5. Emphasize The Benefits Of Dealing With A Specific Channel

Today, many B2B companies are starting to offer customers the ability to buy smaller quantities directly, causing a conflict with the channel. Although the conflict is unavoidable, it doesn’t have to cause problems. Marketers for channel partners can emphasize the benefits of dealing with them, while the manufacturer should present the direct sales as simply an alternative channel. - Mike Maynard , Napier Partnership Limited

Forbes Agency Council is an invitation-only community for executives in successful public relations, media strategy, creative and advertising agencies. Do I qualify?

6. Ensure Consistent Terms For All Distributors

When a manufacturer offers different pricing to different distributors for the same product, it creates distrust among distributors and undermines their competitiveness. Manufacturers should instead establish transparent pricing policies and ensure consistent terms for all distributors. Open communication channels and regular reviews can help address these concerns and maintain trust. - Fadi Agour , RPM: REAL PERFORMANCE MARKETING

7. Define Each Channel’s Role And Target Market

Maintain pricing uniformity across all channels so that no channel has an unfair pricing advantage, and clearly define roles and target markets for each channel to minimize duplication. For example, direct sales may focus on large strategic customers, while resellers may focus on subject matter experts. - Dmitrii Kustov , Regex SEO

8. Establish A PRM System

In B2B, a channel conflict can arise when a supplier undercuts distributors by selling directly at lower prices online. To avoid this, establish a partner relationship management system and ensure transparent pricing, clear territorial divisions and exclusive distributor incentives, nurturing a harmonious ecosystem that values and respects each channel’s contributions and boundaries. - Vaibhav Kakkar , Digital Web Solutions

9. Keep Everyone Talking To Each Other

Imagine you’re selling a hot new software, but your sales team and resellers are stepping on each other’s toes. The sales team offers a big discount to a large company, while the reseller’s price is higher. This can leave a smaller company confused and the reseller frustrated. To avoid this chaos, marketers should clearly define each channel’s role, set tiered pricing and keep everyone talking. - Bernard May , National Positions

10. Provide Value-Added Services

A common B2B channel conflict is when a manufacturer sells directly to end consumers, upsetting traditional distributors. To avoid this, clarify roles, maintain open communication, offer incentives and provide value-added services to strengthen relationships. - Pascal Wilpers , Streamerzone.gg

Editorial Standards
Reprints & Permissions

Numbers, Facts and Trends Shaping Your World

Read our research on:

Full Topic List

Regions & Countries

Publications
Our Methods
Short Reads
Tools & Resources

Read Our Research On:

How Pew Research Center will report on generations moving forward

Journalists, researchers and the public often look at society through the lens of generation, using terms like Millennial or Gen Z to describe groups of similarly aged people. This approach can help readers see themselves in the data and assess where we are and where we’re headed as a country.

Pew Research Center has been at the forefront of generational research over the years, telling the story of Millennials as they came of age politically and as they moved more firmly into adult life . In recent years, we’ve also been eager to learn about Gen Z as the leading edge of this generation moves into adulthood.

But generational research has become a crowded arena. The field has been flooded with content that’s often sold as research but is more like clickbait or marketing mythology. There’s also been a growing chorus of criticism about generational research and generational labels in particular.

Recently, as we were preparing to embark on a major research project related to Gen Z, we decided to take a step back and consider how we can study generations in a way that aligns with our values of accuracy, rigor and providing a foundation of facts that enriches the public dialogue.

A typical generation spans 15 to 18 years. As many critics of generational research point out, there is great diversity of thought, experience and behavior within generations.

We set out on a yearlong process of assessing the landscape of generational research. We spoke with experts from outside Pew Research Center, including those who have been publicly critical of our generational analysis, to get their take on the pros and cons of this type of work. We invested in methodological testing to determine whether we could compare findings from our earlier telephone surveys to the online ones we’re conducting now. And we experimented with higher-level statistical analyses that would allow us to isolate the effect of generation.

What emerged from this process was a set of clear guidelines that will help frame our approach going forward. Many of these are principles we’ve always adhered to , but others will require us to change the way we’ve been doing things in recent years.

Here’s a short overview of how we’ll approach generational research in the future:

We’ll only do generational analysis when we have historical data that allows us to compare generations at similar stages of life. When comparing generations, it’s crucial to control for age. In other words, researchers need to look at each generation or age cohort at a similar point in the life cycle. (“Age cohort” is a fancy way of referring to a group of people who were born around the same time.)

When doing this kind of research, the question isn’t whether young adults today are different from middle-aged or older adults today. The question is whether young adults today are different from young adults at some specific point in the past.

To answer this question, it’s necessary to have data that’s been collected over a considerable amount of time – think decades. Standard surveys don’t allow for this type of analysis. We can look at differences across age groups, but we can’t compare age groups over time.

Another complication is that the surveys we conducted 20 or 30 years ago aren’t usually comparable enough to the surveys we’re doing today. Our earlier surveys were done over the phone, and we’ve since transitioned to our nationally representative online survey panel , the American Trends Panel . Our internal testing showed that on many topics, respondents answer questions differently depending on the way they’re being interviewed. So we can’t use most of our surveys from the late 1980s and early 2000s to compare Gen Z with Millennials and Gen Xers at a similar stage of life.

This means that most generational analysis we do will use datasets that have employed similar methodologies over a long period of time, such as surveys from the U.S. Census Bureau. A good example is our 2020 report on Millennial families , which used census data going back to the late 1960s. The report showed that Millennials are marrying and forming families at a much different pace than the generations that came before them.

Even when we have historical data, we will attempt to control for other factors beyond age in making generational comparisons. If we accept that there are real differences across generations, we’re basically saying that people who were born around the same time share certain attitudes or beliefs – and that their views have been influenced by external forces that uniquely shaped them during their formative years. Those forces may have been social changes, economic circumstances, technological advances or political movements.

When we see that younger adults have different views than their older counterparts, it may be driven by their demographic traits rather than the fact that they belong to a particular generation.

The tricky part is isolating those forces from events or circumstances that have affected all age groups, not just one generation. These are often called “period effects.” An example of a period effect is the Watergate scandal, which drove down trust in government among all age groups. Differences in trust across age groups in the wake of Watergate shouldn’t be attributed to the outsize impact that event had on one age group or another, because the change occurred across the board.

Changing demographics also may play a role in patterns that might at first seem like generational differences. We know that the United States has become more racially and ethnically diverse in recent decades, and that race and ethnicity are linked with certain key social and political views. When we see that younger adults have different views than their older counterparts, it may be driven by their demographic traits rather than the fact that they belong to a particular generation.

Controlling for these factors can involve complicated statistical analysis that helps determine whether the differences we see across age groups are indeed due to generation or not. This additional step adds rigor to the process. Unfortunately, it’s often absent from current discussions about Gen Z, Millennials and other generations.

When we can’t do generational analysis, we still see value in looking at differences by age and will do so where it makes sense. Age is one of the most common predictors of differences in attitudes and behaviors. And even if age gaps aren’t rooted in generational differences, they can still be illuminating. They help us understand how people across the age spectrum are responding to key trends, technological breakthroughs and historical events.

Each stage of life comes with a unique set of experiences. Young adults are often at the leading edge of changing attitudes on emerging social trends. Take views on same-sex marriage , for example, or attitudes about gender identity .

Many middle-aged adults, in turn, face the challenge of raising children while also providing care and support to their aging parents. And older adults have their own obstacles and opportunities. All of these stories – rooted in the life cycle, not in generations – are important and compelling, and we can tell them by analyzing our surveys at any given point in time.

When we do have the data to study groups of similarly aged people over time, we won’t always default to using the standard generational definitions and labels. While generational labels are simple and catchy, there are other ways to analyze age cohorts. For example, some observers have suggested grouping people by the decade in which they were born. This would create narrower cohorts in which the members may share more in common. People could also be grouped relative to their age during key historical events (such as the Great Recession or the COVID-19 pandemic) or technological innovations (like the invention of the iPhone).

By choosing not to use the standard generational labels when they’re not appropriate, we can avoid reinforcing harmful stereotypes or oversimplifying people’s complex lived experiences.

Existing generational definitions also may be too broad and arbitrary to capture differences that exist among narrower cohorts. A typical generation spans 15 to 18 years. As many critics of generational research point out, there is great diversity of thought, experience and behavior within generations. The key is to pick a lens that’s most appropriate for the research question that’s being studied. If we’re looking at political views and how they’ve shifted over time, for example, we might group people together according to the first presidential election in which they were eligible to vote.

With these considerations in mind, our audiences should not expect to see a lot of new research coming out of Pew Research Center that uses the generational lens. We’ll only talk about generations when it adds value, advances important national debates and highlights meaningful societal trends.

Age & Generations
Demographic Research
Generation X
Generation Z
Generations
Greatest Generation
Methodological Research
Millennials
Silent Generation

Kim Parker is director of social trends research at Pew Research Center

How Teens and Parents Approach Screen Time

Who are you the art and science of measuring identity, u.s. centenarian population is projected to quadruple over the next 30 years, older workers are growing in number and earning higher wages, teens, social media and technology 2023, most popular.

1615 L St. NW, Suite 800 Washington, DC 20036 USA (+1) 202-419-4300 | Main (+1) 202-857-8562 | Fax (+1) 202-419-4372 | Media Inquiries

Research Topics

Coronavirus (COVID-19)
Economy & Work
Family & Relationships
Gender & LGBTQ
Immigration & Migration
International Affairs
Internet & Technology
News Habits & Media
Non-U.S. Governments
Other Topics
Politics & Policy
Race & Ethnicity
Email Newsletters

ABOUT PEW RESEARCH CENTER Pew Research Center is a nonpartisan fact tank that informs the public about the issues, attitudes and trends shaping the world. It conducts public opinion polling, demographic research, media content analysis and other empirical social science research. Pew Research Center does not take policy positions. It is a subsidiary of The Pew Charitable Trusts .

Terms & Conditions

Cookie Settings

Reprints, Permissions & Use Policy

IMAGES

6.1: Reading- The Marketing Research Process
PPT
What is The First Step in The Marketing Research Process?
[PDF] Defining the marketing research problem and developing a research
PPT
PPT

VIDEO

How to Craft a Marketing Research Problem Statement
Chapter 1 Defining Marketing Final
Research Problem || Defining a research Problem || Research
How to do Marketing Research
Market Research VS Marketing Research
Redefining marketing and sales roles in B2B #shorts #b2bsales #b2bmarketing #podcast

COMMENTS

10.2 Steps in the Marketing Research Process
Step 1 in the marketing research process is to define the problem. Businesses take a look at what they believe are symptoms and try to drill down to the potential causes so as to precisely define the problem. The next task for the researcher is to put into writing the research objective, or goal, the research is supposed to accomplish.
4.1 The Marketing Research Process
The basic steps used to conduct marketing research, defining the problem, designing the research, designing the data collections forms, specifying the sample, collecting the data, analyzing the data, and writing / presenting the findings, are shown below. After the graphic, each step will be explained in detail.
9 Key Stages in the Marketing Research Process
Step 1: Defining the marketing research problem. Defining a problem is the first step in the research process. In many ways, research starts with a problem facing management. This problem needs to be understood, the cause diagnosed, and solutions developed. However, most management problems are not always easy to research, so they must first be ...
Research problem: Everything a market researcher needs to know
A research problem statement is a brief and precise description of the problem that a researcher wishes to investigate. It defines the research's focus and serves as a framework for developing research questions or hypotheses. Typically, the problem statement begins with a broad topic or research area and then narrows down to a specific ...
How to Define a Research Problem
A research problem is a specific issue or gap in existing knowledge that you aim to address in your research. You may choose to look for practical problems aimed at contributing to change, or theoretical problems aimed at expanding knowledge. Some research will do both of these things, but usually the research problem focuses on one or the other.
6.1 Steps in the Marketing Research Process
The basic steps used to conduct marketing research are shown in figure 6.1. Next, we discuss each step. Figure 6.1. Steps in the Marketing Research Process. [Read full image description.] Step 1: Define the Problem (or Opportunity) There's a saying in marketing research that a problem half defined is a problem half solved.
Step #1 in Marketing Research: Define Your Problem
The first question focuses on the research — finding the answers to specific questions, while the second question focuses on the action items a business must take after the research is completed. Here are a few more examples of marketing problems vs. business problems. Example #1: Goal is to expand into a new target audience.
CHAPTER 3: Problem Definition, Exploratory Research, and the Research
How is the research process initiated? These are the issues we will address in this chapter. Critical Importance of Correctly Defining the Problem. Correctly defining the problem is the crucial first step in the marketing research process. If the research problem is defined incorrectly, the research objectives will also be wrong, and the entire ...
Marketing Research and Market Intelligence: Step 1: Define the Problem
Read this chapter. The American Marketing Association defines marketing research this way: "Marketing research is the function that links the consumer, customer, and public to the marketer through information--information used to identify and define marketing opportunities and problems; generate, refine, and evaluate marketing actions; monitor marketing performance; and improve understanding ...
BUS101: Marketing Research Process
The marketing research process involves six steps: 1: problem definition, 2: develop an approach to the problem, 3: research design formulation, 4: data collection, 5: data preparation and analysis, and 6: report preparation and presentation. The first step in any marketing research study is to define the problem while taking into account the ...
Reading: The Marketing Research Process
If you are familiar with the basic procedures of marketing research, you can supervise and even conduct a reasonably satisfactory search for the information needed. Step 1: Identify the Problem. The first step for any marketing research activity is to clearly identify and define the problem you are trying to solve.
Defining the Market Research Problems
The market research problem is the reason that the market research process is being conducted. It defines the research objectives, how the study is going to be conducted, what marketing metrics should be measured, and the conclusion that is expected as a result of the market research study.
A Basic Guide to Defining Your Market Research Goals
1. Define the problem or opportunity and state your objectives. When creating a new goal, it is important to recognize any current problems in a company. You should also work to see whether a problem can be molded into an opportunity. Basic marketing research courses explain that a management problem is any type of issue that needs managerial ...
PDF Defining marketing problems.
Marketing and mar- keting research executives have always known that research must start with a definition of the marketing problem and that the success of every project depends on that definition. Yet these same executives offer little help in how to go about defining a problem. They do not eöplain what a problem definition is; they do not
Market Research: What It Is and How to Do It
June 3, 2021 28 min read. Market research is a process of gathering, analyzing, and interpreting information about a given market. It takes into account geographic, demographic, and psychographic data about past, current, and potential customers, as well as competitive analysis to evaluate the viability of a product offer.
6.3 Steps in a Successful Marketing Research Plan
1 Identify and describe the steps in a marketing research plan. 2 Discuss the different types of data research. 3 Explain how data is analyzed. 4 Discuss the importance of effective research reports. Define the Problem. There are seven steps to a successful marketing research project (see Figure 6.3). Each step will be explained as we ...
The Market Research Process
Exploratory research. Used to better define a problem or scout opportunities. In-depth interviews and discussions groups are commonly used. 2. Descriptive research ... The first step in any marketing research study is to define the problem, while taking into account the purpose of the study, the relevant background information, what information ...
Marketing Research Process: Complete Guide
Integrate with 100+ apps and plug-ins to get more done. SurveyMonkey Forms. Build and customize online forms to collect info and payments. SurveyMonkey Genius. Create better surveys and spot insights quickly with built-in AI. Market Research Solutions. Purpose-built solutions for all of your market research needs. INDUSTRIES.
Problem‐Definition in Marketing Research Studies
Abstract. Describes an approach that assists decision makers and market research analysts in problem‐definition in market research studies. Examines the two‐stage process of formulating an explicit research objective and developing a series of research questions to achieve that objective, illustrating the approach with examples.
Defining the marketing research problem and developing a research
The key issues in marketing management problem analysis are addressed by showing why problem definition is important; outlining the nature of marketing problems and the difficulties involved in addressing them; and providing guidelines for management and research practitioners.
4.3 Steps in the Marketing Research Process
Figure 4.6: Steps in the Marketing Research Process. Step 1: Define the Problem (or Opportunity) There's a saying in marketing research that a problem half defined is a problem half solved. Defining the "problem" of the research sounds simple, doesn't it? Suppose your product is tutoring other students in a subject you're a whiz at.
Defining the Marketing Research Problem and Developing an Approach
8. Importance of Defining the Problem • Problem definition involves stating the general marketing research problem and identifying its specific components. • Only when marketing research problem has been clearly defined can research be designed and conducted properly. • Inadequate problem definition is a leading cause of failure of marketing research project.
The 5 Steps of the Marketing Research Process
These and many other business problems are answered with marketing research, also referred to simply as market research. ... Step 1: Define the research objective.
The Marketing Research Process
Step 1: Identify the Problem. The first step for any marketing research activity is to clearly identify and define the problem you are trying to solve. You start by stating the marketing or business problem you need to address and for which you need additional information to figure out a solution.
How To Avoid Channel Conflicts As A B2B Marketer
5. Emphasize The Benefits Of Dealing With A Specific Channel. Today, many B2B companies are starting to offer customers the ability to buy smaller quantities directly, causing a conflict with the ...
How Pew Research Center will report on generations moving forward
The field has been flooded with content that's often sold as research but is more like clickbait or marketing mythology. There's also been a growing chorus of criticism about generational research and generational labels in particular. ... When doing this kind of research, the question isn't whether young adults today are different from ...

10.2 Steps in the Marketing Research Process

Step 1: Define the Problem (or Opportunity)

Step 2: Design the Research

Sources of Secondary Data

Gauging the Quality of Secondary Data

Gauging the Credibility of Secondary Data: Questions to Ask

Types of Research Design

The Basic Steps of Conducting a Focus Group

Descriptive Research

Causal Research

Step 3: Design the Data-Collection Forms

Questionnaire Design

Testing the Questionnaire

Step 4: Specify the Sample

Step 5: Collect the Data

Collecting International Marketing Research Data

Step 6: Analyze the Data

Stage 7: Write the Research Report and Present Its Findings

Key Takeaway

Review Questions

Share This Book

4.1 The Marketing Research Process – Steps 1 and 2

Step 1: Define the Problem (or Opportunity)

II. Step 2: Design the Research

Sources of Secondary Data

Gauging the Quality of Secondary Data

Gauging the Credibility of Secondary Data: Questions to Ask

Types of Research Design

Exploratory Research

The Basic Steps of Conducting a Focus Group

Descriptive Research

Causal Research

You Try It!

Share This Book

9 Key stages in your marketing research process

The marketing research process – an overview

Step 1: Defining the marketing research problem

Step 2: Developing a research program: method of inquiry

Step 3: Developing a research program: research method

Step 4: Developing a research program: research design

Exploratory marketing research

Descriptive marketing research

Causal marketing research

Step 5: Choose your sample

Step 6: Gather data

Step 7: Analysis and interpretation

Step 8: The marketing research results

Step 9 Turn your insights into action

Related Articles

Top market research analyst skills for 2024

The 4 market research trends redefining insights in 2024

How BMG and Loop use data to make critical decisions

Designing for safety: Making user consent and trust an organizational asset

The fresh insights people: Scaling research at Woolworths Group

Bank less, delight more: How Bankwest built an engine room for customer obsession

How Qualtrics Helps Three Local Governments Drive Better Outcomes Through Data Insights

How to write great survey questions (with examples)

6.1 Steps in the Marketing Research Process

Step 1: Define the Problem (or Opportunity)

Step 2: Design the Research

Sources of Secondary Data

Gauging the Quality of Secondary Data

Gauging the Credibility of Secondary Data: Questions to Ask

Types of Research Designs

The Basic Steps of Conducting a Focus Group

Step 3: Design the Data-Collection Forms

Questionnaire Design

Testing the Questionnaire

Step 4: Specify the Sample

Step 5: Collect the Data

Step 6: Analyze the Data

Step 7: Write the Research Report and Present Its Findings

Media Attributions

Share This Book

What Is the First Step in the Marketing Research Process?

What is the first step in the marketing research process?

What is a marketing problem?

What are the next steps in the marketing research process?

Previous Post How Does Google Display Ads Grow Marketing Results for Advertisers?

Author Alisha Rechberg